Analysis of Large Non-linear Elastic Deformation of Fabrics

The effect of material non-linearity on large lateral deformations of fabrics structures was studied. Fixing the boundaries, the deformation under uniform internal pressure was analyzed by nonlinear FEM (Finite Element Method). Because non-linear elasticity was found in the tensile testing of fabrics, the non-linear tensile characteristic was also considered in the FEM. Some experiments were conducted under various fixed conditions and the displacement was measured by a laser displacement sensor. The calculated results considering the non linear tensile elasticity of materials were found to agree with the experimental ones. Thus the validity of the proposed calculation method was proven.     

Simulation of kinetic analysis on terpolymerization of styrene/butyl methacrylate/methacrylic acid system

The simultaneous differential equations which connected the copolymerization kinetics of the component reaction in the multi-copolymerization system with the changing rate of the concentration of each monomer and radical, the concentration and the molecular weight of the polymer obtained are analysed in a number of ways. The distribution of the components and the degree of polymerization are also simulated. The styrene/butyl methacrylate/methacrylic acid terpolymerization system, using carbon tetrachloride as solvent and benzoyl peroxide as initiator, was chosen. The simulation model which satisfied the experimental values of the concentration of the multiple components in the system, the composition and molecular weight distribution and the number of chlorine atoms introduced into the copolymer ends is established. When the time interval changed, the effects on the distribution of the composition in copolymers and the distribution of the degree of polymerization were also calculated.     

Rotating fullerene chains in carbon nanopeapods

The rotation of fullerene chains in SWNT peapods is studied using low-voltage high resolution transmission electron microscopy. Anisotropic fullerene chain structures (i.e., C300) are formed in situ in carbon nanopeapods via electron beam induced coalescence of individual fullerenes (i.e., C60). A low electron accelerating voltage of 80 kV is used to prevent damage to the SWNT. The large asymmetric C300 fullerene structure exhibits translational motion inside the SWNT and unique corkscrew like rotation motion. Another asymmetric fullerene chain containing mixed fullerene species is prepared by fusing smaller C60 fullerenes to a larger Sc@C82 fullerene, and this also exhibits corkscrew rotational motion. Chains of Sc3C2@C80 in SWNT peapods adopt a zigzag packing structure, and the entire zigzag chain rotates inside the SWNT to induce structural modifications to the SWNT diameter and cross-sectional shape of the SWNT. The expansion and contraction of the diameter of the SWNT is measured as 17%, demonstrating nanoactuation behavior in carbon nanopeapods.     

Megasonic transducer drive utilizing MOSFET DC-to-RF inverter withoutput power of 600 W at 1 MHz

This paper describes MOSFET power inverter systems, each provided to drive a megasonic transducer with an output power of 600 W at a frequency of 1 MHz. Since the megasonic transducer is used as a resonant load with a series resistance of approximately 1 Ω, the impedance characteristic of the megasonic transducer used as an inverter load is analyzed and compared with measured data. A new method is developed to match the inverter output impedance to the load impedance of as low as 1 Ω at the resonant frequency using a high-performance output transformer which can feed RF power to the load at high efficiency. The output transformer having a primary-to-secondary winding ratio of 2 to 1 was used by the inverter to drive the megasonic transducer. Based on the analysis of the impedance characteristics of the load, two types of MOSFET dc-to-RF power inverters, a full-bridge version and a single-ended version, were designed and built. These power inverters were put into practical use in cleaners. The power conversion efficiency was greater than 80% for the full-bridge version at an output of approximately 600 W and 50% for the single-ended version at an output power of approximately 600 W. When the megasonic transducer was operated with an input power of 600 W. the operation was satisfactory     

A 3-V, 2%-mW multibit current-mode ΣΔ DAC with 100 dBdynamic range

The area ratio of analog to digital for mixed-mode chip has been inversely proportional to the process design rule for a given dynamic range objective, in contradiction to the LSI trend. This paper presents a design approach to realize a high degree of size reduction with process design rules for analog circuitry and a signal processing architecture for digital circuitry. A five-level current-mode ΣΔ digital-to-analog converter (DAC) system reveals full scale total harmonic: distortion plus noise (THD+N) of -90 dB and dynamic-range of 100 dB at 3 V (low power of 22 mW). Analog-area down-scaling can be accomplished by this architecture to be 1.09 mm², using 0.6-μm double-poly double-metal (DPDM) CMOS. For the digital filter, a pipeline instruction sequence with multiplierless architecture also gives small area of 1.98 mm²     

Influence of Slurry Flocculation on the Character and Compaction of Spray-Dried Silicon Nitride Granules

The effect of slurry flocculation on the characteristics of silicon nitride granules prepared by the spray drying process is investigated. The flocculation state of an aqueous silicon nitride slurry is controlled by adding nitric acid and evaluated as a function of pH. Dense and hard silicon nitride granules result from a well-dispersed slurry having a high pH (e.g., 10.8). These hard granules retain their shape in green compacts and form detrimental defects. Lowering the pH of the slurry to a certain value (e.g., pH 7.9) results in slurry flocculation. Granules prepared from this flocculated slurry have low density and low diametral compression strength and contribute to the elimination of large pores in green compacts.     

Interaction control between endohedral metallofullerene and metal substrate by introducing alkanethiol self-assembled monolayer

The interaction control between endohedral metallofullerenes and a metal substrate has been demonstrated by introducing hexanethiol, octanethiol, and decanethiol self-assembled monolayers (SAMs) as the interlayer. We observe the electric properties of terbium endohedral metallofullerenes (Tb@C82) on alkanethiol SAMs with different chain lengths by scanning tunneling microscopy (STM) and spectroscopy (STS). Based on the comparison of the high-resolution STM images of a Tb@C82 molecule on hexanethiol and octanethiol SAMs, the interaction between Tb@C82 and a hexanethiol SAM is found to be larger than that between Tb@C82 and an octanethiol SAM; this is because at 68 K, the rotational states of Tb@C82 terminate only on the hexanethiol SAM. Furthermore, we find that the tunneling current-voltage characteristics of Tb@C82 on the hexanethiol SAM show the rectifying effects that are also caused by the molecular energy level shifts of Tb@C82 molecules due to the large interaction.     

Gaze direction modulates the disengagement of attention from facial expression in 10-month-olds.

This study investigated whether the disengagement of attention from facial expression is modulated by gaze direction in infants. To this end, we measured the saccadic reaction time required for the 10-month-olds to disengage their attention from angry and happy expressions combined with either straight or averted gaze. The 10-month-olds' disengagement of their attention from happy faces was modulated by gaze direction. This finding indicates that gaze direction strongly influences infants' allocation of attention to facial expressions. (PsycINFO Database Record (c) 2010 APA, all rights reserved)