Microstructure of ion-implanted region in TiNi alloy

TiNi alloy samples implanted with various fluences of 3 MeV Cu²⁺ ions were characterized by transmission electron microscope (TEM) and X-ray diffractometer. Cross-sectional TEM images of the samples showed that amorphous region was seen at the fluence of 10¹⁴ ions cm^?2 in case of ion implantation at 300 K of the substrate temperature, but in case of ion implantation at 100 K it did not appear even at 10¹⁵ ions cm^?2. These results were also confirmed by X-ray diffraction profiles of the same samples. Consequently, the extent of microstructure change of TiNi alloy by ion implantation was different depending on the substrate temperature.     

Reliability of multilayer ceramic capacitors with nickel electrodes

The reliability of multilayer ceramic capacitors (MLCCs) with Ni internal electrodes has been studied trom the viewpoint of partial oxygen pressure (P_O2) during firing. It is shown that the load-life time of the insulation resistance (1R) was prolonged by firing under low Po₂ annealing after firing, and the addition of dopants. It is also shown that the generation of oxygen vacancies led to the degradation of IR. Annealing treatment for the oxidation of the dielectric body accelerates the dielectric aging of MLCCs. It is found that the appropriate control of the P_O2 during firing can improve the reliability of MLCCs with Ni electrodes to a level as high as that of MLCCs with precious metal electrodes. Thus, we have developed an MLCC with Ni electrodes that features high reliability and a large capacitance of 10 μF for the Y5V characteristic and 4.7 μF for the X7R characteristic, both in the case of the C3216 (3.2 mm × 1.6 mm × 1.4 mm) form.     

Purification and Characterization of a Maltotriogenic α-Amylase I and a Maltogenic α-Amylase II Capable of Cleaving α-1,6-Bonds in Amylopectin

Extracellular α-amylases I and II, produced by a facultative thermophile Bacillus thermoamyloliquefaciens KP 1071 capable of growing at 30–66°C, were purified to homogeneity. α-Amylase I consisted of a single polypeptide with methionine residue at the NH₂-terminus. α-Amylase II consisted of two equivalent polypeptides each comprising a methionine at the NH₂-terminus. α-Amylase I hydrolyzed endotypically α-1,4-bonds in glycogen, amylopectin and β-limit dextrin, but not their α-1,6-bonds. α-Amylase II degraded amylopectin and β-limit dextrin in exo-fashion by cleaving preferentially α-maltose units from the non-reducing ends and hydrolyzing their α-1,6-branch points. α-Amylase II hydrolyzed maltotriose, phenyl-α-maltoside, α- and β-cyclodextrins and pullulan, whereas α-amylase I had no activity for all these sugars. α-Amylases I and II hydrolyzed maltotetraose, maltopentaose, α-limit dextrin and amylose, but they were inactive for maltose, isomaltose and panose. It was suggested that α-amylase I is the most thermostable type of hitherto known maltotriogenic endo-acting α-amylases, and α-amylase II is the first maltogenic exo-acting α-amylase able to split α-1,6-bonds in amylopectin.     

Effect of Ultrasonication on the Microstructure and Tensile Elongation of Zirconia-Dispersed Alumina Ceramics Prepared by Colloidal Processing

To obtain dense, fine-grained ceramics, fine particles and advanced powder processing, such as colloidal processing, are needed. Al₂O₃ and ZrO₂ particles are dispersed in colloidal suspensions by electrosteric repulsion because of polyelectrolyte absorbed on their surfaces. However, additional redispersion treatment such as ultrasonication is required to obtain dispersed suspensions because fine particles tend to agglomerate. The results demonstrate that ultrasonication is effective in improving particle dispersion in suspensions and producing a homogeneous fine microstructure of sintered materials. Superplastic tensile ductility is improved by ultrasonication in preparing suspensions because of the dense and homogeneous fine microstructure.     

Suppression of inducible nitric oxide synthase expression and amelioration of lipopolysaccharide-induced liver injury by polyphenolic compounds in Eucalyptus globulus leaf extract

Eucalyptus leaf extract (ELE) is rich in hydrolyzable tannins. We examined the effects of ELE and its constituents on lipopolysaccharide (LPS)-induced liver injury in mice. Mice fed a diet supplemented with 1% ELE were intraperitoneally administered LPS. Six hours later, the serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) activities were significantly lower in the ELE-supplemented mice than in the controls; LPS-induced hepatic inducible nitric oxide synthase (iNOS) expression was also suppressed. ELE lowered LPS-stimulated iNOS expression in cultured RAW 264.7 macrophages. Furthermore, the aglycones of hydrolyzable tannins, gallic acid (GA) and ellagic acid (EA), inhibited iNOS induction to a greater extent than did ELE (15-fold higher). When mice were fed a 1% GA or EA diet, the increase in the serum ALT and AST activities and hepatic iNOS expression in response to the LPS challenge were significantly attenuated. Thus, hydrolyzable tannins in ELE ameliorate LPS-induced liver injury.     

Effect of Cation Doping on the Superplastic Flow in Yttria-Stabilized Tetragonal Zirconia Polycrystals

The superplastic characteristics of various cation-doped yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) were examined. For 1 mol% cation doping the true stress of Y-TZP is very dependent on the ionic radii of the doped cations; for instance, smaller cation radii give rise to lower true stress when compared with the other compositions for the same grain size, strain rate, and testing temperature. The altered true stress level must be due to the change in diffusivity of the accommodation process for grain boundary sliding caused by the addition of cations in ZrO₂. The strain to failure of the doped zirconia is affected by both ionic radius and valence of the dopant cations.     

Toward a multi-culture adaptive virtual tour guide agent with a modular approach

Embodied conversational agents (ECAs) are computer-generated, human-like characters that interact with human users in face-to-face conversations. ECA is a powerful tool for representing cultural differences and is suitable for interactive training or edutainment systems. This article presents preliminary results from the development of a culture-adaptive virtual tour guide agent for serving Japanese, Croatian, and general Western users by displaying appropriate verbal and non-verbal behaviors. It is being implemented in Generic ECA Framework, a modular framework for developing ECAs. Dividing the ECA functions into reusable and loosely coupled modules minimizes the effort required to implement additional behavior and facilitates incremental scale up of the system.