Synthesis and characterization of zirconia-based catalyst for the isomerization of n-hexane

Sulfated zirconia is a very strong solid acid catalyst which can be utilized for various reactions. The present study focuses on synthesis of zirconia-based catalyst with high acidity and high surface area, particularly for isomerization reaction. Sulfated zirconia has been obtained by sulfation of zirconia prepared by hydrothermal route. The catalyst was developed by impregnating tungstophosphoric acid on sulfated zirconia by wet incipient method. The catalyst was characterized through Brunauer–Emmett–Teller (BET) surface area, temperature-programmed desorption of ammonia, temperature program reduction of hydrogen, Fourier transmission infrared spectroscopy, and thermogravimetric analysis. The results revealed that the catalyst is crystalline in nature with surface area 190–225?m² g^?1 and acidity 0.135–0.558?mmol?g^?1. Twenty-five percent conversion was obtained (as confirmed by gas chromatography) at 225°C using n-hexane as model hydrocarbon in fixed-bed microreactor.     

Study of heat and mass transfer in indoor conditions for distillation

An indoor simulation study was carried out to evaluate heat and mass transfer relation for a semi-cylindrical metallic (opaque) condensing cover for higher yields at different operating temperatures under free and forced modes of operation. The objective is to design a distillation unit for higher yield for commercialization, particularly in India. Experiments have been conducted for the operating temperature range of 40°C to 80°C in a steady-state condition by using constant temperature bath. Data (temperature and yield) obtained from experimentation have been used to determine the values of coefficient C and n and, consequently, convective as well as evaporative heat transfer coefficients. It is inferred that a higher yield is obtained with an increase of temperature in the forced mode of operation as compared to that in the natural mode of operation due to a fast release of heat from the condensing cover.     

A Defined and Flexible Pocket Explains Aryl Substrate Promiscuity of the Cahuitamycin Starter Unit–Activating Enzyme CahJ

Cahuitamycins are biofilm inhibitors assembled by a convergent nonribosomal peptide synthetase pathway. Previous genetic analysis indicated that a discrete enzyme, CahJ, serves as a gatekeeper for cahuitamycin structural diversification. Here, the CahJ protein was probed structurally and functionally to guide the formation of new analogues by mutasynthetic studies. This analysis enabled the in vivo production of a new cahuitamycin congener through targeted precursor incorporation.     

Self-assembled biogenic melanin modulated surface chemistry of biopolymers-colloidal silica composite porous matrix for the recovery of uranium

A new composite porous matrix surface modulated by self-assembled melanin was developed and investigated for its affinity to bind uranium from an aqueous medium. The composite matrix was synthesized using biopolymers (i.e., agarose and alginate) and inorganic colloidal silica nanoparticles (AACS) by the process of cryotropic-gelation at subzero-temperature. Post-synthesis surface modification of AACS matrix with melanin (MAACS) was performed by green chemistry. The in situ sequestrial conversion of l -Dopa by the biocatalytic activity of tyrosinase enzyme allows the formation of melanin on the surface of AACS matrix. The functional moieties on the matrix display fast kinetics and high binding capacity with respect to uranium. MAACS matrix showed high porosity (~90%) with interconnected pores, high swelling kinetics and permeability. Other physicochemical properties of the matrix, such as thermal stability, storage modulus, and surface charge potential were found to be increased, while percent degradation decreased, which demonstrate improved properties of the matrix after impregnation of silica nanoparticles and surface functionalization with melanin. Thermodynamic parameters suggest that the binding of uranyl ions is passive and spontaneous. The concentrated recovery of uranium was achieved with reusability potential of adsorbent. These results suggest an environment friendly and safer method for the recovery of uranium. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46937.     

Detecting stealth DHCP starvation attack using machine learning approach

Dynamic Host Configuration Protocol (DHCP) is used to automatically configure clients with IP address and other network configuration parameters. Due to absence of any in-built authentication, the protocol is vulnerable to a class of Denial-of-Service (DoS) attacks, popularly known as DHCP starvation attacks. However, known DHCP starvation attacks are either ineffective in wireless networks or not stealthy in some of the network topologies. In this paper, we first propose a stealth DHCP starvation attack which is effective in both wired and wireless networks and can not be detected by known detection mechanisms. We test the effectiveness of proposed attack in both IPv4 and IPv6 networks and show that it can successfully prevent other clients from obtaining IP address, thereby, causing DoS scenario. In order to detect the proposed attack, we also propose a Machine Learning (ML) based anomaly detection framework. In particular, we use some popular one-class classifiers for the detection purpose. We capture IPv4 and IPv6 traffic from a real network with thousands of devices and evaluate the detection capability of different machine learning algorithms. Our experiments show that the machine learning algorithms can detect the attack with high accuracy in both IPv4 and IPv6 networks.     

A bi-objective task scheduling approach in fog computing using hybrid fireworks algorithm

The Journal of Supercomputing - With the rapid increase in the functionality of IoT applications, the services provided by edge/IoT devices have surged in the recent past. Fog computing is gaining...     

Dual segment rectangular dielectric resonator antenna with metamaterial for improvement of bandwidth and gain

The simulation and experimental studies of an aperture‐coupled wideband dual segment rectangular dielectric resonator antenna with metamaterial for C‐band applications are presented in this paper. The antenna consists of Alumina (Al₂O₃) ceramic as upper segment and Teflon as lower segment. The combination of circular‐shaped coplanar split‐ring resonator and conducting strip has been used as metamaterial superstrate. With the use of metamaterial superstrate, the bandwidth of the antenna is increased by 48% through simulation and 22% experimentally. The broadside radiation pattern of the antenna is converted into directive radiation pattern with reduced beamwidth when metamaterial superstrate is used. The peak gain of the antenna is also enhanced by 33% through simulation and 31% experimentally with the use of metamaterial superstrate. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:646–655, 2014.     

Development of spectral band cloning techniques for soil nutrients estimation

Satellite‐based monitoring is an indispensable tool to guide soil‐specific crop management. However, it has attained little success in the estimation of soil nutrients due to the limitations incurred from inherent spectral characteristics. In this study, spectral band cloning (SBC) is developed and proposed to augment the soil nutrient predictive capabilities of broadband satellite data. Fine‐spectral channels of spectrometers were synchronized with coarse resolution of IRS satellite data to generate nutrient‐sensitive cloned IRS bands. Soil samples, collected at the time of satellite image acquisition in Lop Buri, Thailand, were analyzed both spectrally and chemically, viz., soil organic matter (OM), phosphorus, potassium and iron. The resulting SBC‐based models showed acceptable correlations, which otherwise were unattainable from raw IRS bands through prevailing models. Accuracy and validation measures showed good agreements between the measured and estimated nutrient surfaces. It is concluded that the SBC is a promising method of quantitative soil nutrient mapping, and could further be used for identification and mapping of other indiscernible biophysical parameters.     

Effect of laser irradiation on the electrical properties of amorphous germanium films

Amorphous films of germanium were grown using a vacuum evaporation technique, on glass substrates kept at room temperature. As-grown films were irradiated with Q-Switched Nd-YAG laser pulses (=1.06 m, 20nsec, 10 to 50Jcm^–2). The d.c. conductivity measurements were made in the temperature range 77 to 300 K. It was observed that the effect of laser irradiation was similar to the effect caused by the thermal annealing of the films. The d.c. conductivity data were analysed in the light of Mott's theory of a variable range hopping conduction process.