Adsorption of urea,creatinine, and uric acid from three solution types using spherical activated carbon and its recyclability

In this paper, we propose that the urinary toxins from the wastewater be adsorbed on an adsorbent such as spherical activated carbon and the latter be regenerated by subjecting it to high temperatures to recycle activated carbon and also to recycle the water used in dialysis. We studied the adsorption of artificial waste dialysate, which is a mixed solution of urea, creatinine, and uric acid, and the separate solutions for each of these and found that their extents of adsorption onto the spherical activated carbon material were nearly identical. The amount of adsorption was approximately 1.4 mg·g^-1 for urea, 18 mg·g^-1 for creatinine, and 20 mg·g^-1 for uric acid. The urea, creatinine, and uric acid adsorbed onto the spherical activated carbon decomposed on heat treatment at 500℃, and the adsorption capacity of the spherical activated carbon was regenerated. Our study successfully demonstrated that the spherical activated carbon can be recycled in the waste dialysate treatment process.     

Identification of Tumor Suppressive Genes Regulated by miR-31-5p and miR-31-3p in Head and Neck Squamous Cell Carcinoma

We identified the microRNA (miRNA) expression signature of head and neck squamous cell carcinoma (HNSCC) tissues by RNA sequencing, in which 168 miRNAs were significantly upregulated, including both strands of the miR-31 duplex (miR-31-5p and miR-31-3p). The aims of this study were to identify networks of tumor suppressor genes regulated by miR-31-5p and miR-31-3p in HNSCC cells. Our functional assays showed that inhibition of miR-31-5p and miR-31-3p attenuated cancer cell malignant phenotypes (cell proliferation, migration, and invasion), suggesting that they had oncogenic potential in HNSCC cells. Our in silico analysis revealed 146 genes regulated by miR-31 in HNSCC cells. Among these targets, the low expression of seven genes (miR-31-5p targets: CACNB2 and IL34; miR-31-3p targets: CGNL1, CNTN3, GAS7, HOPX, and PBX1) was closely associated with poor prognosis in HNSCC. According to multivariate Cox regression analyses, the expression levels of five of those genes (CACNB2: p = 0.0189; IL34: p = 0.0425; CGNL1: p = 0.0014; CNTN3: p = 0.0304; and GAS7: p = 0.0412) were independent prognostic factors in patients with HNSCC. Our miRNA signature and miRNA-based approach will provide new insights into the molecular pathogenesis of HNSCC.     

Measurement of internal stresses in coatings using time resolved fluorescence

This paper describes a new nondestructive technique for detecting internal stresses in coatings using time resolved fluorescence. The measurement principle is based upon an experimental result that the decay time of fluorescence from poly(3-octylthiophene), P3OT, dispersed in uniaxially-stretched polymer films decreases with increasing tensile stress acting on the films. Internal stresses in the clear coat and in the base coat of a multilayer structure, which was composed of electrodeposited coat, surface coat, base coat, and clear coat, were estimated from the decay time of fluorescence from P3OT in both coats. The order of internal stresses in the clear coat and base coat of the multilayer system was 1 MPa. When the coatings were piled up, the internal stress decreased as the distance from a metal substrate was increased. It was found that moisture and temperature influenced internal stresses in the clear coat rather than in the base coat. Internal stress in the clear coat, which was one layer coated on a metal substrate, was measured by the traditional bimetallic method or by the time resolved fluorescence technique. Comparing both methods, it was concluded that the time resolved fluorescence technique gave reliable values for internal stresses in coatings.     

Adsorption properties of oxygen and methane on Ga-ZSM-5; the origin of the selectivity of NOx reduction using methane

The adsorption properties of oxygen and methane on Ga-ZSM-5 and Cu-ZSM-5 catalysts were examined by a TPD method to clarify the extraordinary selectivity of HC-SCR using methane on Ga-ZSM-5. It was observed that Ga-ZSM-5 did not adsorb oxygen but adsorbed methane dissociatively, while on Cu-ZSM-5 oxygen was dissociatively adsorbed and reacted with adsorbed ethylene.     

Behavioral and electroantennogram responses of periplanone analogs

The biological activities of synthetic periplanone analogs, including four candidates of periplanone-A (P-A), were evaluated by behavioral and electroantennogram (EAG) assays. Among 16 periplanone analogs, six compounds evoked pheromonal activity from the male American cockroaches. The threshold dosages of these biological active analogs were 10–10⁵ times lower than that of the known periplanone mimic, germacrene-D. The conformation required for eliciting the pheromonal activity is discussed in terms of the structure-activity relationship of these analogs. Hauptmann's P-A elicited the strongest pheromonal activity among four candidates of P-A in our bioassay, suggesting that Hauptmann's P-A is a natural P-A produced from female cockroaches.     

Effect of applying voltage on photocatalytic destruction of 1,4-dioxane in aqueous system

In the current work, we prepared a TiO₂ coating on stainless mesh using electrophoretic deposition (EPD), and applied voltage to a stainless mesh to examine the synergy effect on photocatalysis of both 1,4-dioxane and ethylene glycol diformate (EGDF), a main intermediate of the photocatalysis of 1,4-dioxane. The photocatalytic decomposition rate of 1,4-dioxane depends on applying voltage under diffusion-limited reaction conditions. Ethylene glycol diformate and 1,4-dioxane exhibited inverse voltage dependence. Voltage swing provides high-efficiency photocatalysis of 1,4-dioxane while suppressing EGDF formation. This method will be effective for a photocatalysis system containing several chemicals, each with different voltage dependence.     

Feeding-stimulant activity of algal glycerolipids for marine herbivorous gastropods

Phagostimulant activity of glycerolipids such as digalactosyldiacylglycerol (DGDG), 6-sulfoquinovosyldiacylglycerol (SQDG), phosphatidylcholine (PC), phosphatidylethanolamine (PE), etc., have been examined using the Avicel plate method for three kinds of marine herbivorous gastropods, the abaloneHaliotis discus, the turban shellTurbo cornutus, and the topshellOmphalius pfeifferi. DGDG showed strong activity for all the test animals. SQDG was much less active than the other glycerolipids for abalone. The turban shell and the top shell responded more or less sensitively to all tested glycerolipids at doses of 10–20g/sample zone.Chemical Studies on Phagostimulants for Marine Gastropods. Part VIII. For Part VII, see Sakata et al. (1988a).     

Highly Reactive β-Dicalcium Silicate: III, Hydration Behavior at 40–80°C

The effect of curing temperature (40°, 60°, 80°C) on the hydration behavior of β-dicalcium silicate (β-C₂S) was investigated. The β-C₂S was obtained by decomposition of hillebrandite, Ca₂(SiO₃)(OH)₂, at 600°C, has a specific surface area of about 7 m²/g, and is in the form of fibrous crystals. The dependence of the hydration reaction on temperature continues until the reaction is completed. The hydration is completed in 1 day at 80°C and in 14 days at 14°C. The hydration mechanism is different above and below 60°C, but at a given temperature, the reaction mechanism and the silicate anion structures of C-S-H do not change significantly from the initial to the late stages of the reaction. High curing temperature and long curing times after completion of reaction promote silicate polymerization. The Ca/Si ratio of C-S-H shows high values, being almost 2.0 above 60°C and 1.95 below 40°C.     

New Preparation Method of CdS Clusters Encapsulated in Y-Type Zeolites

CdS clusters encapsulated in Y-type zeolite were prepared by a novel technique with non-aqueous systems. The mechanical mixture of CdCl₂· 2.5H₂O crystal with Y-type zeolite was heated at 773 K, followed by the H₂S treatment at 373 K, resulting in the formation of CdS clusters with the size <2.3 nm.     

Separation of Polyvinyl Chloride from Plastic Mixture by Froth Flotation after Surface Modification with Ozone

Selective modification by ozonation for the surface of polyvinyl chloride (PVC) was evaluated to separate PVC from the other plastics, polyethylene terephthalate (PET), polycarbonate (PC) and polymethyl methacrylate (PMMA), with almost the same density as PVC by the froth flotation process. Ozonation could selectively decrease the contact angles of flexible PVC from 87.5 degrees to 68.4 degrees and rigid PVC from 90.3 degrees to 66.9 degrees, whereas little decreases in the contact angle were observed for other plastics. This would be due to the replacement of the chloride group on the surface of PVC, into hydrophilic functional groups; carbonyl, carboxyl and ester group. The PVC was successfully separated from the other plastics by the froth flotation process after the selective surface modification by ozonation.