Effect of Compressive Stress in Tumor Microenvironment on Malignant Tumor Spheroid Invasion Process

In this study, we proposed an in vitro tumor model to simulate the mechanical microenvironment and investigate the effect of compressive stress on the invasion process of malignant tumors. It has been pointed out that the biomechanical environment, as well as the biochemical environment, could affect the transformation of cancer cell migration, invasion, and metastasis. We hypothesized that the solid stress caused by the exclusion of surrounding tissue could transform tumor cells from noninvasive to invasive phenotypes. Colorectal cell spheroids were embedded and cultured in agarose gels of varying concentrations to simulate the earliest stages of tumor formation and invasion. The spheroids embedded in gels at higher concentrations showed peculiar growth after 72 h of culture, and the external compressive loading imposed on them caused peculiar growth even in the gels at lower concentrations. In conclusion, the mechanical microenvironment caused the transformation of tumor cell phenotypes, promoting the growth and invasion of tumor cell spheroids.     

A New Equation for Predicting the Dielectric Constant of a Mixture

The dielectric constant of a compound consisting of two different materials was simulated using the Monte Carlo and finite element methods. In the high concentration range of the higher dielectric constant material, the simulated value of the dielectric constant showed a "parallel-model"-like tendency. On the other hand, in the low concentration range of the higher dielectric constant material, the compound showed a "serial-model"-like behavior. Around 65% content of the higher dielectric constant material, it exhibited results similar to the logarithmic mixing rule. After careful consideration of these results, a new equation to predict the dielectric constant of the compound was derived. The agreement between the dielectric constant calculated by the new equation and the measured values was better than in any other case reported before.     

Highly Reactive β-Dicalcium Silicate: III, Hydration Behavior at 40–80°C

The effect of curing temperature (40°, 60°, 80°C) on the hydration behavior of β-dicalcium silicate (β-C₂S) was investigated. The β-C₂S was obtained by decomposition of hillebrandite, Ca₂(SiO₃)(OH)₂, at 600°C, has a specific surface area of about 7 m²/g, and is in the form of fibrous crystals. The dependence of the hydration reaction on temperature continues until the reaction is completed. The hydration is completed in 1 day at 80°C and in 14 days at 14°C. The hydration mechanism is different above and below 60°C, but at a given temperature, the reaction mechanism and the silicate anion structures of C-S-H do not change significantly from the initial to the late stages of the reaction. High curing temperature and long curing times after completion of reaction promote silicate polymerization. The Ca/Si ratio of C-S-H shows high values, being almost 2.0 above 60°C and 1.95 below 40°C.     

A Novel Preparation Method for Foamed Silica Ceramics by Sol-Gel Reaction and Mechanical Foaming

A simple method for obtaining silica foam has been developed by combining sol-gel reaction and mechanical foaming without added organic pore formers, in order to reduce generation of CO₂ and harmful gases by decomposition of the organic compounds. The silica foam was prepared by mechanically foaming the silica sol and controlling the viscosity change and gelling. The gelation time of the silica sol can be varied from 10 minutes to 3 hours by changing the pH, temperature and concentration of the surfactant added as a foam stabilizer. The dried silica gel foam was calcined at 600°C then fired at 1000°C to obtain sintered silica foam. The porosity and average pore size of the silica foam was 84% and 140 m, respectively. The bending strength and gas permeability of the sintered silica foam was 2.4 MPa and 9.4 × 10^–11 m², respectively.     

Composition Regulation by Flow Copolymerization of Methyl Methacrylate and Glycidyl Methacrylate with Free Radical Method

It is important to match the feeding ratio of comonomers to the composition ratio in the resulting copolymers as closely as possible in industrial production, where the goal is often to produce more a homogeneous composition in copolymers. In this study, a flow copolymerization system with a conventionally initiated free radical method, together with randomly selected polymerization conditions is investigated. It is succeeded in achieving a closer match between the composition ratio and feeding ratio than previously reported in the copolymerization of styrene with methyl methacrylate and of glycidyl methacrylate with methyl methacrylate, which will widen the range of applications, by precisely controlling the mixing and heating in a flow polymerization apparatus. This is confirmed by the fact that the estimated values of reactivity ratios, r₁ and r₂, which are used in the reaction kinetics of copolymerization, are close to 1.     

Microstructure and Magnetic Properties of Metastable RFeO3 (R: Rare‐earth element) Formed from Undercooled Melt

Containerless levitation technique, where the undercooling can be treated as one of the major thermodynamic parameters, was used to study the influence of oxygen partial pressure () on the microstructure and physical properties of rare‐earth orthoferrites RFeO₃ (where R = Rare‐earth element) in the ranges from 10⁵ to 10^?1 Pa. The microstructure of the as‐solidified samples changed into orthorhombic RFeO₃ (o‐RFeO₃), metastable hexagonal RFeO₃ (h‐RFeO₃), and Fe²⁺‐containing RFe₂O₄ and a new metastable R₃Fe₂O₇ phases with decreasing . The effect of on the magnetic properties was indicated as that the saturation magnetization gradually increased for R = La to Yb and decreased for R = Lu with decreasing due to the formation of metastable and magnetic phases such as Fe₃O₄ and Fe.     

Preparation and Properties of Carbon/Zeolite Composites with Corrugated Structure

Composites of carbon/zeolite with corrugated structures were prepared by carbonization, steam activation and/or hydrothermal treatment of corrugated paper. No zeolite formation resulted from conventional hydrothermal treatment of the carbonized and activated samples in NaOH solution but zeolite Na P1 was formed by addition of silica to the solution. By contrast, zeolites Na P1 and Na A were formed by the in-situ crystallization method (hydrothermal treatment of solid samples impregnated with NaOH solution). With higher impregnating NaOH concentrations, longer reaction times and higher reaction temperatures, the products changed to sodalite- and cancrinite-type compounds. Hydrothermal treatment was effective in increasing the specific surface area of the products by the formation of zeolite from amorphous calcium aluminosilicate, and also increased the mechanical strength by gluing together the carbon fibers in the samples. The resulting samples showed enhanced adsorption for polar molecules such as ammonia, water vapor and methanol due to the formation of composites of activated carbon with hydrophilic zeolites.     

Identification of Neoantigens in Cancer Cells as Targets for Immunotherapy

The clinical benefits of immune checkpoint blockage (ICB) therapy have been widely reported. In patients with cancer, researchers have demonstrated the clinical potential of antitumor cytotoxic T cells that can be reinvigorated or enhanced by ICB. Compared to self-antigens, neoantigens derived from tumor somatic mutations are believed to be ideal immune targets in tumors. Candidate tumor neoantigens can be identified through immunogenomic or immunopeptidomic approaches. Identification of neoantigens has revealed several points of the clinical relevance. For instance, tumor mutation burden (TMB) may be an indicator of immunotherapy. In various cancers, mutation rates accompanying neoantigen loads may be indicative of immunotherapy. Furthermore, mismatch repair-deficient tumors can be eradicated by T cells in ICB treatment. Hence, immunotherapies using vaccines or adoptive T-cell transfer targeting neoantigens are potential innovative strategies. However, significant efforts are required to identify the optimal epitopes. In this review, we summarize the recent progress in the identification of neoantigens and discussed preclinical and clinical studies based on neoantigens. We also discuss the issues remaining to be addressed before clinical applications of these new therapeutic strategies can be materialized.     

Design of a Full-Consensus Glutamate Decarboxylase and Its Application to GABA Biosynthesis

Glutamate decarboxylase (GAD) catalyses the decarboxylation of L-glutamate to gamma-aminobutyric acid (GABA). Improvement of the enzymatic properties of GAD is important for the low-cost synthesis of GABA. In this study, utilizing sequences of enzymes homologous with GAD from lactic acid bacteria, highly mutated GADs were designed using sequence-based protein design methods. Two mutated GADs, FcGAD and AncGAD, generated by full-consensus design and ancestral sequence reconstruction, had more desirable properties than native GADs. With respect to thermal stability, the half-life of the designed GADs was about 10 °C higher than that of native GAD. The productivity of FcGAD was considerably higher than those of known GADs; more than 250 mg/L of purified enzyme could be produced in the E. coli expression system. In a production test using 26.4 g of l -glutamate and 3.0 g of resting cells, 17.2 g of GABA could be prepared within one hour, without purification, in a one-pot synthesis.     

Direct Observation of the Collection Process for Dust Particles from an Air Stream by a Charged Water Droplet

One of the most effective precipitation methods for submicrometer particles is the charged droplet scrubber. The dust collection in the charged droplet scrubber is considered to consist of some processes with respect to the interaction between charged dust particles and a charged water droplet. That is, the charged dust particles are attracted to, collide with, adhere to, penetrate into, rebound from, accumulate on, and reentrain from a charged water droplet. The direct observation of the collection process for dust particles by a charged water droplet was conducted by using the experimental setup designed by the authors. It was found from the experiments that particles with good wettability were captured inside the water droplet, particles with poor wettability floated at regular intervals on the droplet surface, and particles with medium wettability were trapped on or inside the water droplet. When particles were trapped on the droplet surface the growth of dendritic depositions was found, and their behavior was very distinct from those obtained on the fibrous filter due to the fluidity of the droplet surface. The deposition mechanisms of charged particles on the charged water droplet are discussed qualitatively.