Neighborhood sociodemographics and change in built infrastructure

While increasing evidence suggests an association between physical infrastructure in neighborhoods and health outcomes, relatively little research examines how neighborhoods change physically over time and how these physical improvements are spatially distributed across populations. This paper describes the change over 25 years (1985–2010) in bicycle lanes, off-road trails, bus transit service and parks, and spatial clusters of changes in these domains relative to neighborhood sociodemographics in four US cities that are diverse in terms of geography, size, and population. Across all four cities we identified increases in bicycle lanes, off-road trails, and bus transit service, with spatial clustering in these changes that related to neighborhood sociodemographics. Overall, we found evidence of positive changes in physical infrastructure commonly identified as supportive of physical activity. However, the patterning of infrastructure change by sociodemographic change encourages attention to the equity in infrastructure improvements across neighborhoods.     

Modulatory Effects of Biosynthesized Gold Nanoparticles Conjugated with Curcumin and Paclitaxel on Tumorigenesis and Metastatic Pathways—In Vitro and In Vivo Studies

Background: Breast cancer is the most common cancer in women globally, and diagnosing it early and finding potential drug candidates against multi-drug resistant metastatic breast cancers provide the possibilities of better treatment and extending life. Methods: The current study aimed to evaluate the synergistic anti-metastatic activity of Curcumin (Cur) and Paclitaxel (Pacli) individually, the combination of Curcumin–Paclitaxel (CP), and also in conjugation with gold nanoparticles (AuNP–Curcumin (Au-C), AuNP–Paclitaxel (Au-P), and AuNP–Curcumin–Paclitaxel (Au-CP)) in various in vitro and in vivo models. Results: The results from combination treatments of CP and Au-CP demonstrated excellent synergistic cytotoxic effects in triple-negative breast cancer cell lines (MDA MB 231 and 4T1) in in vitro and in vivo mouse models. Detailed mechanistic studies were performed that reveal that the anti-cancer effects were associated with the downregulation of the expression of VEGF, CYCLIN-D1, and STAT-3 genes and upregulation of the apoptotic Caspase-9 gene. The group of mice that received CP combination therapy (with and without gold nanoparticles) showed a significant reduction in the size of tumor when compared to the Pacli alone treatment and control groups. Conclusions: Together, the results suggest that the delivery of gold conjugated Au-CP formulations may help in modulating the outcomes of chemotherapy. The present study is well supported with observations from cell-based assays, molecular and histopathological analyses.     

3D-FE-Analysis of CT-specimens including viscoplastic material behavior and nonlocal damage

In order to describe the time-dependent inelastic behavior of steel structures up to failure, a material model is developed within the framework of thermodynamics considering viscoplastic material behavior, isotropic hardening, softening, and isotropic ductile damage. Since softening and damage lead to localization of deformations, the model is extended by a non-local implicit gradient formulation. An additional gradient equation is formulated for the local damage variable in order to achieve results independent of the finite-element discretization. The approach is verified by 3D-structural analysis of CT-specimens.     

The carbonization of colloidal polyaniline nanoparticles to nitrogen‐containing carbon analogues

The carbonization of nanostructures afforded by conducting polymers represents a new route to the preparation of functional nanostructured carbons. The exposure of colloidal polyaniline particles stabilized with poly(N‐vinylpyrrolidone) or silica nanoparticles at 650 °C in inert atmosphere led, in both cases, to nitrogen‐containing carbonaceous materials with specific surface areas of 200 and 205 m² g^?1, respectively, and conductivities of 8.3 × 10^?7 and 1.9 × 10^?10 S cm^?1, respectively. The latter material contained 77 wt% of silica. The original particulate nanostructure of the samples was preserved after carbonization. The carbon‐to‐nitrogen atomic ratio was 7.2 and 7.9; the nitrogen content in the carbonized polyaniline–poly(N‐vinylpyrrolidone) particles was 10.8 wt%. Thermogravimetric analysis in air revealed their stability to be up to 500 °C. This is comparable with commercial multi‐wall carbon nanotubes, which have similar areas of application. The nitrogen‐containing carbons are potentially useful as supports for catalysts and in applications where carbon of higher hydrophilicity would be of benefit. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of monetite and hydroxyapatite whiskers obtained by a hydrothermal method

High temperature hydrothermal syntheses, using calcium nitrate tetrahydrate, sodium dihydrogen phosphate and urea as precursors, and characterization of hydroxyapatite (HAp) whiskers are reported herein. The morphology and chemical composition of the crystals from a monetite to a hydroxyapatite phase were controlled by varying the starting concentrations of the precursors and the solution pH through the amount of urea that is decomposed during heating. X-ray diffraction (XRD) analysis, infrared spectroscopy (IR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM) and high-resolution TEM (HRTEM) were used to investigate the products of the syntheses in order to find the optimum reaction conditions for obtaining the desired morphology and phase composition. Different morphologies ranging from single crystals of monetite through rods and plates of hydroxyapatite with different size distribution to whisker-like single hydroxyapatite crystal were achieved by simply varying the starting concentration of urea. Structural refinement of the hydroxyapatite whiskers confirmed a strong preferential orientation along the c-axis direction of the hexagonal crystal structure, which was significantly different from the usually observed random crystal orientation. TEM and SEM analysis of the apatite whiskers confirmed single crystal structure with the a c-axis orientation parallel to the long axis of the whiskers, with sizes up to 150 μm in length, 10 μm in width and with a thickness of about 300 nm, that grew from the same centre of nucleation, forming flaky-like particles.     

Sound Velocity of Kaolin in the Temperature Range from 20 °C to 1100 °C

The sound velocity of Sedlec kaolin during heating from 20 °C to 1100 °C was investigated by modulated force thermomechanical analysis (mf-TMA). In the interval from 20 °C to 250 °C, the sound velocity increases which can be explained by liberation of the water molecules from pores and micropores. Dehydroxylation (450 °C to 650 °C) presents itself with a decrease of the sound velocity. After dehydroxylation, a two-step increase of the sound velocity was observed. The first step of the increase of the sound velocity is due to solid-state sintering at low temperatures. The second step starts at 950 °C as a consequence of the collapse of the metakaolinite structure. After the maximum, a steep increase of the sound velocity follows as a result of solid-state sintering.     

The effect of the shape and size of the pores on the mechanical properties of porous HAP-based bioceramics

In this study, the influence of the shape and size of the pores on the mechanical properties of the obtained porous HAP-based bioceramics was investigated. The porous HAP-based bioceramics were obtained starting from spherical calcium hydroxyapatite powder, obtained by hydrothermal syntheses. The number of shapeless inter-agglomerate pores decreased and amount of spherical intra-agglomerate pores increased on increasing the sintering temperature from 1100 °C to 1250 °C. The shape of pores also changed with thermal treatment of specimens; the small pores remained spherical while the larger pores became more spherical in shape, as was proved by image analysis. A three-dimensional, finite element unit cell model was applied to evaluate the influence of pore shape on the mechanical strength of HAP ceramics. By analyzing the effect of the shape of pores to the fracture toughness of sintered porous HAP bioceramics, it was observed that the more spherical the pores were, the tougher became the bioceramics. After sintering at 1250 °C for 2 h, measured toughness was 1.31 MPa m^1/2, which is a relatively high value for this type of bioceramics.     

An adaptive technique for content-based image retrieval

We discuss an adaptive approach towards Content-Based Image Retrieval. It is based on the Ostensive Model of developing information needs—a special kind of relevance feedback model that learns from implicit user feedback and adds a temporal notion to relevance. The ostensive approach supports content-assisted browsing through visualising the interaction by adding user-selected images to a browsing path, which ends with a set of system recommendations. The suggestions are based on an adaptive query learning scheme, in which the query is learnt from previously selected images. Our approach is an adaptation of the original Ostensive Model based on textual features only, to include content-based features to characterise images. In the proposed scheme textual and colour features are combined using the Dempster-Shafer theory of evidence combination. Results from a user-centred, work-task oriented evaluation show that the ostensive interface is preferred over a traditional interface with manual query facilities. This is due to its ability to adapt to the user's need, its intuitiveness and the fluid way in which it operates. Studying and comparing the nature of the underlying information need, it emerges that our approach elicits changes in the user's need based on the interaction, and is successful in adapting the retrieval to match the changes. In addition, a preliminary study of the retrieval performance of the ostensive relevance feedback scheme shows that it can outperform a standard relevance feedback strategy in terms of image recall in category search.     

The morphology and substructure of {225}F martensite in an Fe−Mn−Cr−C alloy

A transmission electron microscopy and diffraction study of martensite plates in an Fe-3 pct Mn-3 pct Cr-1 pct C alloy was carried out with particular attention to details of the martensite substructure. A corresponding optical metallographic study of plate morphology was made. A variability in martensite substructure was observed from plate to plate, although a (252)_F ^* plate was generally associated with (112)_B transformation twins and {111}_F stacking faults. The particular (111)_F fault variant gave rise to a wedge-shaped plate morphology. Planar {101}_B inhomogeneities were frequently observed in the martensite, and most of these appear to be derived from austenite stacking faults. In general, more than one type of inhomogeneity was observed in a single martensite plate and the “typical” plate substructure was rather difficult to characterize, although the habit plane was found invariably to be (252)_F.     

Standardized tests fail to assess the effects of antibiotics on environmental bacteria

Pharmaceuticals are designed and used because of their specific biological effects. Over the past decade, compounds from various classes of pharmaceuticals have been detected in the environment. Concern has grown about the adverse effects pharmaceuticals in the environment might potentially have on human and ecological health. A sound risk assessment is therefore urgently needed for pharmaceuticals. Standardized tests for assessing the effects of chemicals on environmental organisms are widely used for this purpose. However it is questionable whether classical standardized tests give reliable data needed for environmental risk assessment. In this study we investigated the suitability of the respiration inhibition test OECD 209 for the assessment of the effects of antibiotics, disinfectants and cytotoxics on sewage sludge bacteria. We found that inhibition concentrations can strongly depend on the test period and the type of compound. We conclude that tests to assess the effects of pharmaceuticals on environmental organisms such as bacteria have to be evaluated before their results can be used in environmental risk assessment.