Dielectric and thermal properties of dicyclopentadiene containing bismaleimide and cyanate ester. Part IV

A novel bismaleimide (BMI), bis(4-maleimidophenoxy-3,5-dimethylphenyl)dicyclopentadiene (DCPDBMI), containing a large dicyclopentadiene (DCPD) and aryl ether linkage, was synthesized from bis(4-aminophenoxy-3,5-dimethylphenyl)dicyclopentadiene and maleic anhydride by the usual two-step procedure that included ring-opening addition to give bismaleamic acid, followed by cyclodehydration to bismaleimide. The monomers were characterized by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (NMR), elemental analyses (EA), and mass spectra (MS). A series of bismaleimide-triazine (BT) resins were prepared from synthesized bismaleimide (DCPDBMI) and then cured with 2,6-dimethyl phenol-dicyclopentadiene dicyanate ester (DCPDCY) at various molar ratios. Thermal properties of cured BT resins (DCPDBMI/DCPDCY) were studied using dielectric analyzer (DEA), dynamic mechanical analyzer (DMA) and thermalgravimetric analyzer (TGA). These data were compared with that of commercial bismaleimide (DDMBMI) cured with bisphenol A dicyanate ester (BADCY). The cured DCPDBMI/DCPDCY exhibits lower dielectric constant, dissipation factor and moisture absorption than those of DDMBMI/BADCY. The effects of blend composition on the glass transition temperatures and thermal stability are discussed.     

Self-aligned fabrication of single crystal diamond gated field emitter array

This paper describes a self-aligned fabrication process for diamond gated field emitter array (FEA). Utilizing the non-conformal coverage sputtering conditions of silicon oxide, an interesting “sphere on cone” structure is formed on diamond nano tip array, which is the key point of gate hole opening process. This structure causes shadowing at certain regions of side-wall during Ti / Au gate metal deposition. Removal of “sphere” by wet etching leads to the successful fabrication of a single crystalline diamond gated FEA. Scanning electron microscope observations reveal the fabrication of a uniform emitter array with tip radius of curvature (20 nm) and gate hole (1.4 μm). We also confirmed that no noticeable physical damage exists on tip. In field emission characteristics of the fabricated single crystal diamond gated FEA, gate voltage control of field emission current is realized.     

Prediction model of compressive strength development of fly-ash concrete

Based on experimental results concerning the compressive strength development of concrete containing fly ash, the authors derived an estimation equation for compressive strength development. The equation can express coefficient , which indicates the activity of fly ash as a binder, in the form of a function of age, fly-ash content, and Blaine specific surface area of fly ash.

This equation is capable of explaining the increases in the early strength due to fly ash in place of part of fine aggregate, the decreases in the early strength due to fly ash in place of part of cement, the increases in the long-term strength due to pozzolanic reaction, the relationship between the fly-ash replacement ratio and the ratio of strength increase/decrease, and the effect of fly ash's Blaine specific surface area on the strength.     

Catalytic characteristics of various rubber-reinforcing carbon blacks in decomposition of methane for hydrogen production

Carbon black has recently been reported to act as an effective catalyst for methane decomposition and to exhibit stable catalytic behavior despite carbon deposition, and thus it can be used for CO₂-free production of hydrogen from natural gas. In this work, various carbon blacks with different primary particle size were investigated with respect to methane decomposition under atmospheric pressure from 1123 to 1223 K. Catalytic characteristics, such as activity, activation energy and reaction order, were investigated and compared. It was observed that with decreasing primary particle size (or increasing specific surface area), the specific activity increased and the activation energy decreased. The reaction orders for various pelletized, rubber-reinforcing carbon blacks were 0.6–0.7, about the same regardless of the primary particle size, while they were near 1 for fluffy carbon blacks. Fluffy carbon black showed higher activity and activation energy than the pelletized carbon black of the same primary particle size. Changes of the surface morphology during carbon deposition were observed by TEM. Variations of the number of active sites were discussed in regard of the primary particle size, carbon deposition and binder. The presence of different types of active sites was also suggested.     

Editing and Synthesizing Two‐Character Motions using a Coupled Inverted Pendulum Model

This study aims to develop a controller for use in the online simulation of two interacting characters. This controller is capable of generalizing two sets of interaction motions of the two characters based on the relationships between the characters. The controller can exhibit similar motions to a captured human motion while reacting in a natural way to the opponent character in real time. To achieve this, we propose a new type of physical model called a coupled inverted pendulum on carts that comprises two inverted pendulum on a cart models, one for each individual, which are coupled by a relationship model. The proposed framework is divided into two steps: motion analysis and motion synthesis. Motion analysis is an offline preprocessing step, which optimizes the control parameters to move the proposed model along a motion capture trajectory of two interacting humans. The optimization procedure generates a coupled pendulum trajectory which represents the relationship between two characters for each frame, and is used as a reference in the synthesis step. In the motion synthesis step, a new coupled pendulum trajectory is planned reflecting the effects of the physical interaction, and the captured reference motions are edited based on the planned trajectory produced by the coupled pendulum trajectory generator. To validate the proposed framework, we used a motion capture data set showing two people performing kickboxing. The proposed controller is able to generalize the behaviors of two humans to different situations such as different speeds and turning speeds in a realistic way in real time.     

Microstructural Evidence for Diffusion-Driven Tetragonal-to-Orthorhombic Phase Transformation in Y-Ba-Cu-O Superconductor

Microstructures of Y-Ba-Cu-O superconductor were observed using a polarized microscope. Orthorhombic and tetragonal phases were easily distinguished by the optical etching with cross-polarized light. In the specimen cooled rapidly in oxygen, it was possible to see the path of oxygen diffusion by observing the variation of the twin concentration. At the boundary between transformed and untransformed materials, evidence for diffusion-driven transformation could be clearly seen.     

Highly Efficient Overall Water Splitting Through Optimization of Preparation and Operation Conditions of Layered Perovskite Photocatalysts

The layered perovskite materials were found to give the high photocatalytic activity in water splitting reaction under UV irradiation, where the electronic structure of perovskite slab constructing the layered structure (the total cation valency) was the most crucial factor to the high photocatalytic activity. Both the excessive cation valency and the layered structure were required for active photocatalysts, while the slab thickness of layered perovskites had an insignificant effect on water-splitting activity. In order to identify key variables that affected photocatalytic activity and to optimize the performance of (110) layered perovskite, La₂Ti₂O₇ was modified by various methods. The optimum amount of loaded nickel had a great effect and the amount depended on the surface area of the perovskite phase. When an alkaline-earth element such as Ba, Sr, and Ca was doped on La₂Ti₂O₇, the photocatalytic activity was enhanced markedly. Introduction of an alkaline hydroxide into the reaction system as an external additive enhanced the activity further showing extremely high quantum yields close to 50%.     

Synthesis and electrical properties of poly[2-(2-(4-trifluoromethyl)phenyl)ethenyl-1,4-phenylenevinylene] and PPV copolymers

Summary Poly[2-(2-(4-(trifluoromethyl)phenyl)ethenyl)-5-methoxy-1,4-phenylenevinylene] (PFEMPV) and a series of PPV copolymers containing 1,4-phenylenevinylene (PV) units were synthesized through a water-soluble precursor route, and their electrical and third-order nonlinear optical properties were studied. The PFEMPV films could not be doped with I₂, but FeCl₃-doped films showed an electrical conductivity of 5.0x10^-4 S/cm. The conductivities of FeCl₃-doped copolymer films ranged from 2.0x10^-3 to 2.0 S/cm depending on their copolymer compositions. The third-order nonlinear optical susceptibility, ⁽³⁾(–;,,–), was also investigated by the degenerate four wave mixing technique at 602 nm. The ⁽³⁾ value of PFEMPV was 6.9x10^-11 esu. The photoluminescence spectrum of PFEMPV shows its emission maximum at 550 nm.     

Structure-property relationships in rubber-toughened epoxies

Epoxies toughened with two reactive liquid rubbers, an epoxy-terminated butadiene acrylonitrile rubber (ETBN) and an amino-terminated butadiene acrylonitrile rubber (ATBN), were prepared and studied in terms of their structure property relationships. A two-phase structure was formed, consisting of spherical rubber particles dispersed in an epoxy matrix. A broad distribution of rubber particles was observed in all the materials with most of the particles ranging in size from 1 to 4 μm, but some particles exceeding 20 μm were also found. Impact strength, plane strain fracture toughness (K_IC), and fracture energy (G_IC) were increased, while Young's modulus and yield strength decreased slightly with increasing rubber content and volume fraction of the dispersed phase. Both G_IC and K_IC were found to increase with increasing apparent molecular weight between crosslinks and decreasing yield strength. The increased size of the plastic zone at the crack tip associated with decreasing yield strength could be the cause of the increased toughness. An ATBN-toughened system containing the greatest amount of epoxy sub-inclusion in the rubbery phase demonstrated the best fracture toughness in this series. In the present systems, rubber-enhanced shear deformation of the matrix is considered to be the major toughening mechanism. Curing conditions and the miscibility between the liquid rubber and the epoxy resin determine the phase morphology of the resulting two-phase systems. Kerner's equation successfully describes the modulus dependence on volume fraction for the two-phase epoxy materials.     

CO hydrogenation over potassium-promoted Fe/carbon catalysts

The effects of potassium on the catalytic behavior in CO hydrogenation over K-promoted Fe/carbon catalysts having low K/Fe ratios were investigated. Even though the doses of potassium were low the promotional effects were pronounced, especially on the olefin-to-paraffin ratio, and theC ₃ toC ₄ olefin selectivities of the K-promoted catalysts were as high as 51 to 66 mol%. Over the catalysts having no or low potassium content the olefin-to-paraffin ratio and the ratio of the CO₂ formation rate to the rate of CO conversion to hydrocarbons remained roughly the same regardless of temperature, while over the K-promoted catalysts having higher potassium content they increased with temperature. Formation of significant amounts of filamentous carbon was observed in the K-promoted catalysts; however, the carbon deposition did not appear to affect the inherent activity and selectivity of the K-promoted catalysts.