Adhesion improvement of HIVIPP C targets on Au backings

Accurate measurement of the cross-section of the ¹²C(α, γ)¹⁶O reaction is very important in nuclear astrophysics. Enriched ¹²C targets prepared with the high energy vibrationl powder plating [HIVIPP] method for this purpose have been used successfully. Initially, however, the ¹²C deposits for studying this small cross-section partially peeled from their Au backings when irradiated with beam currents≥2 times the 7 μA pulsed α-beam used previously. This problem was solved when the amorphous ¹²C powders were converted to graphite by heat-treatment in a high-temperature furnace. We investigated powder heat treatments at temperatures of 2600-3500 °C to reveal, which conditions resulted in uniform and highly adhesive depositions on Au backings.     

Adenovirally expressed basic fibroblast growth factor rescues photoreceptor cells in RCS rats

OBJECTIVE: To examine the efficacy of an antileukocyte adhesion antibody (anti-CD18) as an adjuvant for delayed (2 hours and 4 hours) thrombolytic therapy (recombinant human tissue plasminogen activator [rt-PA]) in middle cerebral artery occlusion (MCAO) in rats. BACKGROUND: Thrombolytic therapy with rt-PA is limited in its application by a short therapeutic window. METHODS: Male Wistar rats were subjected to MCAO by a single fibrin-rich clot. The rats were assigned to the following experimental groups: Experiment 1 (treatment 2 hours after embolization), 1) rt-PA, 2) anti-CD18 antibody, 3) rt-PA and anti-CD18 antibody, 4) immunoglobulin (Ig) G, and 5) vehicle; Experiment 2 (treatment 4 hours after occlusion), 1) rt-PA alone, 2) rt-PA and anti-CD18 antibody, and 3) nontreated control group. Neurologic deficits, infarction volume, hemorrhage, and brain myeloperoxidase (MPO) immunoreactivity were measured. Results: Administration of rt-PA and anti-CD18 antibody 2 hours later reduced significantly (p < 0.05) the infarct volume and improved neurologic deficits compared with the vehicle-treated group. Treatment with rt-PA alone improved neurologic deficits significantly and reduced mean infarct volume compared with the vehicle-treated group. However, treatment with anti-CD18 antibody neither reduced infarct volume nor improved neurologic deficits compared with the IgG-treated group. The combination of rt-PA and anti-CD18 antibody treatment at 4 hours reduced significantly the infarct volume and MPO immunoreactive cells compared with rt-PA treatment alone at 4 hours, and reduced neurologic deficits compared with rt-PA treatment alone and compared with the nontreated animals. CONCLUSIONS: The combination of antileukocyte adhesion antibody and thrombolytic therapy may increase the therapeutic window for the treatment of stroke.     

Breakdown characteristics of gas‐insulated switchgear for nonstandard lightning impulse waveforms under nonuniform electric field

To improve the insulation specification of gas‐insulated switchgear (GIS), it is necessary to recognize the insulation characteristics of SF₆ gas during actual surges (called nonstandard lightning impulse waveforms) occurring at field substations. The authors observed the insulation characteristics of SF₆ gas gap under various types of nonstandard lightning impulse waveforms and compared them quantitatively with those obtained with standard lightning impulse waveforms. The experimental results were used to derive an evaluation method for real surges, which was applied to typical surges for various UHV and 500‐kV systems. In the preceding study, therefore, only the case of a quasi‐uniform electric field (with a typical range of field utilization factors in the bus of a GIS) was investigated. In the present investigation, the insulation characteristics of an SF₆ gas gap for a nonuniform electric field were observed experimentally and an evaluation method for converting nonstandard lightning impulse waveforms equivalently to the standard lightning impulse waveform was investigated. © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 177(1): 11–18, 2011; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21144     

Importance of Kupffer Cells in the Development of Acute Liver Injuries in Mice

Kupffer cells reside within the liver sinusoid and serve as gatekeepers. They produce pro- and anti-inflammatory cytokines and other biologically important molecules upon the engagement of pattern recognition receptors such as Toll-like receptors. Kupffer cell-ablated mice established by in vivo treatment with clodronate liposomes have revealed many important features of Kupffer cells. In this paper, we review the importance of Kupffer cells in murine acute liver injuries and focus on the following two models: lipopolysaccharide (LPS)-induced liver injury, which is induced by priming with Propionibacterium acnes and subsequent challenge with LPS, and hypercoagulability-mediated acute liver failure such as that in concanavalin A (Con A)-induced hepatitis. Kupffer cells are required for LPS sensitization induced by P. acnes and are a major cellular source of interleukin-18, which induces acute liver injury following LPS challenge. Kupffer cells contribute to Con A-induced acute liver failure by initiating pathogenic, intrasinusoidal thrombosis in collaboration with sinusoidal endothelial cells. The mechanisms underlying these models may shed light on human liver injuries induced by various etiologies such as viral infection and/or abnormal metabolism.     

Improvement of thermal characteristics of latent heat thermal energy storage units using carbon-fiber brushes: experiments and modeling

Brushes made of carbon fibers with a high thermal conductivity are inserted on the shell side of a heat exchanger to enhance the conductive heat transfer rates in phase change materials. The experimental results show that the brushes essentially improve the heat exchange rate during the charge and discharge processes even when the volume fractions of the fibers are about one percent. A three-dimensional model describing the heat transfer in the heat exchanger is numerically solved. The model predicts well the experimental outlet fluid temperatures and the local temperatures in the composite.     

Behaviors of micro‐layer in micro‐channel boiling system applying laser extinction method

To elucidate the mechanism and characteristics of boiling heat transfer in a micro‐channel vaporizer, the experimental investigation of the micro‐layer thickness that formed between the heating surface and vapor generated was important. The micro‐layer thickness was measured applying the laser extinction method for channel gap sizes of 0.5, 0.3, and 0.15 mm. It was clarified that the gap size, the rate of bubble growth, and the distance from the incipient bubble site have an effect on the micro‐layer thickness in a micro‐channel boiling system. The initial micro‐layer thickness grew with an increase of the velocity of bubble forefront to moderate the value of the velocity. In the region of greater velocity, the thickness was constant for each gap. The distributions of the initial thickness of micro‐layer on the heat transfer surface were shown. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(1): 35–46, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20096     

Photocarrier generation in organic thin-film solar cells with an organic heterojunction

Photocurrent–voltage characteristics for organic solar cells with a heterojunction formed between copper phthalocyanine and a perylene derivative (or C₆₀) were studied. The photocurrent was observed under both reverse and forward biases. From the analysis of the photocurrent action spectra, the origin of the reverse photocurrent was attributed to the excitons formed in both the organic layers, whereas that of the forward photocurrent was attributed to the excitons formed in the perylene derivative (or C₆₀) layer. The photocurrent density under reverse bias increased at higher temperatures, suggesting that the charge recombination possibility was lowered at higher temperatures. On the basis of the time responses of the photocurrents observed after pulsed photoirradiation, the charge separation and transport processes are discussed.     

Design of energy‐efficient train speed profiles considering fixed‐block signaling system

In dense traffic railway networks, trains may often slow down or stop between stations owing to previous train delays. If preceding train trajectory can be predicted, energy‐efficient driving can be achieved by suppressing unnecessary speed changes. In this paper, we propose an algorithm to find energy‐efficient driving considering fixed‐block signaling (FBS) system by using dynamic programming (DP). DP is suitable for use because it can optimize the control inputs with discrete and state constraints. In this paper, we discuss energy‐efficient driving by considering a FBS system using some case studies of simulation. In the simulation, we examine a technique to drive an express train in an energy‐efficient way when the preceding local train is running toward the station with passing loops. The results show that the proposed method can derive complex speed profiles for energy‐efficient driving and the train can be operated with a maximum reduced energy consumption of 8.3%.