Drying characteristics of porous material immersed in a bed of hygroscopic porous particles fluidized under reduced pressure

A relatively large wet material was immersed in a fluidized bed of hygroscopic porous particle (silica gel beads) under reduced pressure. And then the drying characteristics were compared with those in the case of inert particle (glass beads). The comparison of drying characteristics is performed experimentally and theoretically. In calculation, the water transfer from the sample to the fluidized bed was considered. The calculation results are in good agreement with the experimental data. The effects of the operational conditions (the pressure in the drying chamber and the temperature of the drying gas) on the drying characteristics were also examined in both fluidizing particles.The drying finishes earlier in the case of hygroscopic porous particle than in the case of inert particle regardless of pressure in the drying chamber, since the water transfer from the sample facilitates the drying in the case of hygroscopic porous particles. The temperature decrement in drying appears in the case of inert particle. This phenomenon is also observed in the case of hygroscopic porous particle, but the decrement degree of the temperature is much smaller than that in the case of inert particle. The difference of the minimum temperature in the sample in drying between the cases of hygroscopic porous particle and inert particle is very slight for different pressures in the drying chamber.     

Preparation of gelatinous aluminium hydroxide by urea from aqueous solutions containing chloride,nitrate and sulphate of aluminium

The preparation of gelatinous aluminium hydroxide from aqueous solutions containing a mixture of the chloride, nitrate or sulphate of aluminium and urea by heating at 95°C has been investigated under different conditions. The pH value of aqueous solutions, on heating for a given period of time, gradually increases, rises steeply at pH 4.0–7.5 and finally approaches a constant value. The precipitate appears at about pH 7 in the presence of chloride or nitrate ions and about pH 4 in the presence of sulphate ions. Although the gelatinous precipitates in the chloride and nitrate systems are apparently different from the granular, filterable one in the sulphate system, their compositions are not influenced by the species of aluminium salt. The fresh precipitates exist in an amorphous state, and go to pseudoboehmite by ageing. It seems that the amount of pseudoboehmite increases as the concentration of aluminium salt in aqueous solution decreases. However, the transformation from amorphous aluminium hydroxide to pseudoboehmite is reduced in the presence of sulphate ions. Furthermore, it is found that the X-ray diffraction peak for the (200) plane, as an orthorhombic structure, in the pseudoboehmite precipitated from chloride or nitrate solution is more intense than that from sulphate solution.     

Mechanical properties of porous titanium compacts prepared by powder sintering

Porous Ti compacts for biomedical applications are successfully fabricated in the porosity range from 5.0 to 37.1 vol% by controlling sintering conditions and Ti powder sizes. Young’s modulus and bending strength at the porosity of around 30 vol% are found to be similar to those of human cortical bone.     

A wide view auto‐stereoscopic 3D display with an eye‐tracking system for enhanced horizontal viewing position and viewing distance

This paper describes the development of auto‐stereoscopic three‐dimensional (3D) display with an eye‐tracking system for not only the X‐axis (right–left) and Y‐axis (up–down) plane directions but also the Z‐axis (forward–backward) direction. In the past, the eye‐tracking 3D system for the XY‐axes plane directions that we had developed had a narrow 3D viewing space in the Z‐axis direction because of occurrence of 3D crosstalk variation on screen. The 3D crosstalk variation on screen was occurred when the viewer's eye position moved back and forth along the Z‐axis direction. The reason was that the liquid crystal (LC) barrier pitch was fixed and the LC barrier was able to control the only barrier aperture position. To solve this problem, we developed the LC barrier that is able to control the barrier pitch as well as the barrier aperture position in real time, corresponding to the viewer's eye position. As a result, the 3D viewing space has achieved to expand up to 320–1016 mm from the display surface in the Z‐axis direction and within a range of ±267 mm in the X‐axis direction. In terms of the Y‐axis direction, the viewing space is not necessary to be considered, because of a stripe‐shaped parallax barrier.     

复杂装备故障预测与健康管理系统初探

故障预测与健康管理(PHM)系统是新型维修保障模式—自主后勤保障的重要组成部分,对提高复杂装备的战备完好性和降低维修成本具有重要意义;首先介绍PHM系统基本概念及主要组成,并对在复杂装备全寿命周期实施PHM的必要性进行分析;综合论述了PHM系统实现中的关键支撑技术:基于RCM分析的方案设计、基于匹配度的健康状态评估和基于剩余寿命预测的维修决策;最后给出了PHM系统在无人机装备中的应用实例;国内外应用情况表明,PHM系统可显著提高维修保障效率并降低维修保障费用,可实现经济可承受性目标。     

WSDL and UDDI extensions for version support in web services

Versioning is an important aspect of web service development, which has not been adequately addressed so far. In this article, we propose extensions to WSDL and UDDI to support versioning of web service interfaces at development-time and run-time. We address service-level and operation-level versioning, service endpoint mapping, and version sequencing. We also propose annotation extensions for developing versioned web services in Java. We have tested the proposed solution for versioning in two real-world environments and identified considerable improvements in service development and maintenance efficiency, improved service reuse, and simplified governance.     

Damage to seagrass and seaweed beds in Matsushima Bay,Japan, caused by the huge tsunami of the Great East Japan Earthquake on 11 March 2011

Damage to seagrass and seaweed beds caused by the huge tsunami of the Great East Japan Earthquake on 11 March 2011 was investigated in Matsushima Bay, Miyagi Prefecture, Japan, by comparing satellite images taken before the tsunami in November 2009 and after the tsunami in May 2011. The results showed that the tsunami destroyed 220 ha of seagrass and seaweed beds, from 320 ha in 2009 to 100 ha just after the tsunami. Zostera marina beds on the sandy and muddy bottom were rather severely damaged compared with brown seaweed beds of Sargassum horneri on the rocky substrate. Substrates of the beds and directions of the tsunami seem to be responsible for the magnitude of the damage to the beds. Maps of the spatial distributions of the beds before and after the tsunami can provide information for the restoration of seagrass and seaweed beds as natural infrastructures of coastal fisheries resources.     

Simulation of postoperative 3D facial morphology using a physics-based head model

We propose a prototype of a facial surgery simulation system for surgical planning and the prediction of facial deformation. We use a physics-based human head model. Our head model has a 3D hierarchical structure that consists of soft tissue and the skull, constructed from the exact 3D CT patient data. Anatomic points measured on X-ray images from both frontal and side views are used to fire the model to the patient's head. The purposes of this research is to analyze the relationship between changes of mandibular position and facial morphology after orthognathic surgery, and to simulate the exact postoperative 3D facial shape. In the experiment, we used our model to predict the facial shape after surgery for patients with mandibular prognathism. Comparing the simulation results and the actual facial images after the surgery shows that the proposed method is practical.     

Analysis of Mg content of Zn_(1-x)Mg_xO film grown on sapphire substrates by plasma-assisted molecular beam epitaxy

Semiconductor materials with wide band gap have been extensively used to fabri-cate the blue laser light emitting diodes and ultraviolet photodetectors, which are impor-tant elements of semiconductor instruments, such as displays, optical data storages, ul-traviolet sensors, electroluminescent devices and solar-blind detectors. This kind of ma-terials is now becoming a hot research object in semiconductor physics. GaN was the first suitable ultraviolet laser material people found in this real…     

Swelling Pressure of Wet Rice Grains Estimated from Distribution Coefficients of Saccharides

The apparent density and porosity of four rice cultivars, Koshihikari, Yumepirika, Habutaemochi, and Kitayukimochi, decreased and increased, respectively, with the increasing temperature in the range of 5 °C to 60 °C. Especially large changes in both apparent density and porosity were observed at 60 °C, which can be ascribed to the starch gelatinization of rice. The swelling pressures of wet rice grains were estimated to be 7.5, 6.3, 6.2, and 5.9 MPa at 25 °C for Koshihikari, Yumepirika, Habutaemochi, and Kitayukimochi, respectively, from the distribution coefficients of solutes with different molar volumes. Rice grains having higher amylose content exhibited a weak tendency toward higher swelling pressure. The distribution coefficients of fructose for the Koshihikari and Habutaemochi cultivars were larger at higher temperatures, but the temperature dependence of the swelling pressure was not significant for both cultivars. These results suggested that the increase in the distribution coefficient was caused by the gradual relaxation of the interior structure of rice with increasing temperature.