2-甲基-8-（9，9-二丁基芴）-3，5，7-三炔-2-辛醇的合成和性质研究

合成了一种新颖的乙炔衍生物，2-甲基-8-（9，9-二丁基芴）-3，5，7-三炔-2-辛醇（6a），并利用红外光谱（IR），紫外光谱（Uv），核磁（NMR），质谱（MS）等对其结构进行了表征。利用红外光谱（IR）和紫外光谱（Uv）对其拓扑固相聚合性质进行了研究。实验结果表明，这些化合物在加热和紫外光照射条件下都能够发生固相聚合，但得到的是结构复杂的聚合物。     

Growth of emerald crystals from PbO · V2O5 flux

The flux growth of emerald crystals by slow cooling in the PbO · V₂O₅ flux is reported. The crystals exhibited the typical emerald-green colour, were up to 1.8 mm in size and transparent. Their form was a regular hexagonal rod bounded by the well-developed {0001} and {10ˉ10} faces. The solubility of emerald in PbO · V₂O₅ was also investigated; about 9.0 g emerald was dissolved in 100 g PbO · V₂O₅ at 1200 °C. The solubility decreased gradually with decreasing temperature. Taking the solubility data into account, the presence of undissolved particles in the solution was found to be a necessary condition for the growth of large emerald crystals. Unsaturated solution at a soak temperature produced good and relatively small emerald crystals in a subsequent cooling experiment. Advantages of the PbO · V₂O₅ flux are also mentioned. Emerald crystals showing various kinds of imperfections, and even good crystals, were also present.     

Two dimensional shape optimization using partial control and finite element method for compressible flows

The objective of this study is to determine the two dimensional shape of a body located in a compressible viscous flow, where the applied fluid force is minimized. The formulation to obtain the optimal shape is based on an optimal control theory. An optimal state is defined as a state, in which the performance function defined as the integration of the square sum of the applied fluid forces is minimized due to a reduction in the applied fluid forces. Compressible Navier–Stokes equations are treated as constraint equations. In other words, the body is considered to have a shape that minimizes the fluid forces under the constraint of the Navier–Stokes equations. The gradient of the performance function is computed using the adjoint variables. A weighted gradient method is used as the minimization algorithm. The volume of the body is assumed to be the same as that of the initial body. In the case of the algorithm used in this study, both the creation of a structured mesh around the surface of the body and the smoothing procedure are employed for the computation of gradient. In this study, a remeshing technique based on the structured mesh around the body changing its configuration in the iteration cycle is employed. For the correction to keep the volume constant, the surface coordinates are moved along the radial direction. For the discretization of both the state and adjoint equations, the efficient bubble function interpolation presented previously by the authors [18] is employed. The algorithm, which is known as the partial control algorithm, is applied to the numerical procedure to determine the movement of the coordinates. In the case of the gradient method, in order to avoid the convergence of the final shape to the local minimum shape, the new algorithm, which is called the partial control algorithm, is presented in this study. In numerical studies, the shape determination of a body in a uniform flow field is carried out in 2D domains. The initial shape of the body is assumed to be an elliptical cylinder. The shape is modified by minimizing the applied fluid forces. Finally, the desired shape of a body, whose performance function is reduced and converged to a constant value, is obtained. By carrying out a procedure that involves the use of the partial control algorithm, the desired shape of a body, whose performance function is reduced further, is obtained. Stable shape determination of a body in a compressible viscous flow is carried out by using the presented method. It is indicated that the optimal shape can be obtained by using the partial control algorithm.     

On the pseudo-freeness and the CDH assumption

The notion of pseudo-free group was first introduced by Hohenberger (Master’s thesis, EECS Dept., MIT, 2003). Rivest (TCC 2004. LNCS 2951, 505–521, 2004) formalized it and showed that several standard cryptographic assumptions hold on pseudo-free groups, such as the RSA assumption, the strong RSA assumption and the discrete logarithm assumption. Rivest (TCC 2004. LNCS 2951, 505–521, 2004) also proposed some variations of pseudo-free group, and those were formalized by Hirano and Tanaka (Research Reports, Series C: Computer Science, C-239, Tokyo Institute of Technology, 2007). In this paper, we study the relationships among such variations of pseudo-free group. We show that the pseudo-freeness implies the weak pseudo-freeness, and that the pseudo-freeness is equivalent to the pseudo-freeness with generalized exponential expressions. We also show that the computational Diffie-Hellman assumption holds on pseudo-free groups in a slightly varied form.     

The effects of infusion of trieicosapentaenoyl-glycerol emulsion on extravascular lung water during myocardial ischemia and reperfusion in dogs

To test the effects of eicosapentaenoic acid (EPA) infusion on pulmonary edema induced by coronary ligation and reperfusion, extravascular lung water (EVLW) was measured in situ by the thermal-dye double indicator dilution method in dogs. In the control group of five dogs, 30 mL of a 10% soybean oil emulsion was infused through a leg vein. One hour after infusion, the left anterior descending coronary artery below the first diagonal branch was ligated for 15 min and then reperfused for 30 min. In the EPA group, six dogs were similarly treated with an emulsion of a 10% trieicosapentaenoyl-glycerol (90% pure). EVLW, pulmonary capillary wedge pressure, mean pulmonary artery pressure, mean blood pressure, and cardiac index were measured before and 15 min after coronary ligation, and 15 min and 30 min after coronary reperfusion. There were no significant differences in the hemodynamic indices between the two groups. EVLW significantly increased up to two times of baseline during coronary ligation in the control group (P< 0.05) and more during reperfusion (P<0.01), whereas EVLW did not increase in the EPA group. In conclusion, EPA inhibited EVLW accumulation and may be useful for ameliorating one of the ischemia-reperfusion-induced complications, pulmonary edema.     

The strength properties of iron aluminides

For the development of Fe−Al alloys as structural materials, a deep understanding of slip and deformation properties is necessary. In particular, since mechanical properties of the iron aluminides are affected by excess vacancy strengthening as well as the positive-temperature dependence of yield stress, controlling these strength features is essential. In this article, the strength properties of iron aluminides are reviewed. Author’s Note: All compositions are provided in mole percent. Kyosuke Yoshimi earned his Ph.D. in materials science and engineering at Tohoku University in 1997. He is currently a research associate at Tohoku University. Shuji Hanada earned his Ph.D. in materials science and engineering at Tohoku University. He is currently a professor at Tohoku University. Dr. Hanada is also a member of TMS.     

Production of functional substances from black rice bran by its treatment in subcritical water

Black rice bran was treated by water and subcritical water at temperatures ranging from 20 to 260 °C for 5 min and at 200 and 260 °C for 5-120 min. The bran extracts were analyzed for their radical scavenging activity, protein and carbohydrate contents, molecular-mass distribution, antioxidation activity, emulsifying activity, and emulsion-stabilizing activity. The radical scavenging activity and the protein content of the extract were higher at higher treatment temperature. The carbohydrate content also increased with increasing temperature up to 200 °C, then steeply decreased at the temperatures higher than 200 °C. The bran extracts treated at 260 °C for 5 min exhibited a suppressive activity toward autoxidation of linoleic acid with the increasing the weight ratio of the bran extract to linoleic acid. The bran extracts prepared at 40-200 °C for 5 min showed the emulsifying- and emulsion-stabilizing activities, while the extracts prepared at 220-260 °C were low in the activities.     

Possibilities of the Formation of Enol-Ethers in Lignin by Soda Pulping

In the alkaline decomposition of a β-O-4 type lignin model compound (erythro-guaiacylglycerol-β-guaiacyl ether, compound 1), an isomeric pair of C₆C₂ enol-ether (2-methoxy-4-[2-(2-methoxyphenoxy)-vinyl]-phenol, compound 2) was detected as the main decomposition product with no trace of C₆C₃ enol-ether (4-[3-hydroxy-1-(2-methoxyphenoxy)-propenyl]-2-methoxy-phenol, compound 3) or other dimers. In contrast, compound 2 was not detected in the alkaline decomposition products of compound 3. Under alkaline conditions, the γ-hydroxymethyl group of compound 3 was reduced to form 2-methoxy-4-[1-(2-methoxyphenoxy)-propenyl]-phenol (compound 4). In the HSQC analysis of soda lignin, the formation of substructures of C₆C₂ type enol-ether (related to compound 2) was confirmed. However, no substructures related to compound 4, which could be formed if a substructure of C₆C₃ type enol-ether was formed under alkaline conditions, were detected. Therefore, it could be concluded that C₆C₃ type enol-ethers could not be intermediates of alkaline decomposition products of lignin.     

Emission of Particulate Matter 2.5 (PM2.5) from Sewage Sludge Incinerators in Japan

Because fine particulate matter ≤2.5 µm in diameter (PM2.5) causes health problems, PM2.5 emissions are of concern. However, little research on stationary sources has been conducted. To determine the concentration and filtration behavior of PM2.5, dust was collected from five fluid-bed sewage sludge incinerators (SSIs) sorted by particle size using cascade impactors. The average PM2.5 concentration was 0.00014–4.8 mg/Nm³. The total estimated amount of PM2.5 emissions from the SSIs for all plants in Japan was 0.96–8.9 tons/year. Since the SSIs with dry Electrostatic Precipitators (EP) contributed 75–99% of the total emissions, replacing dry EPs with bag filters would significantly reduce the PM2.5 emissions from SSI.