实炉底节能连续式加热炉

轧钢生产使用实炉底连续式加热炉加热钢坯，炉内双纵滑管用耐热耐高温材料，无水冷，起到节约水、电的作用，达到节能增效的目的。     

PMMA／PBA乳胶IPN阻尼材料的研究

用乳液聚合方法合成了一系列的互穿聚合物网络，其中包括：ＰＭＭＡ／ＰＢＡ和Ｐ（ＭＭＡ－ｃｏ－ＰＭＡ）／ＰＢＡ乳胶互穿聚合物网络（ＬＩＰＮ），ＰＭＭＡ／ＰＢＡ乳胶双向互穿聚合物网络（ＬＢＩＰＮ）以及ＰＭＭＡ／ＰＢＡ界面交联互穿聚合物网络（ＩＣＬＩＰＮ）。动态力学谱和拉伸试验结果表明：（１）ＰＭＭＡ／ＰＢＡ互穿聚合物网络的两组分相容性和阻尼性能可通过ＭＭＡ和ＰＭＡ共聚来改善；（２）双向互穿技术是一种行之     

Exact evaluation of laser linewidth requirements for optical PSKhomodyne communication systems with balanced PLL receivers

The power penalty induced by imperfect phase recovery in PSK homodyne communication systems with balanced phase-locked loop receivers are exactly evaluated. Optimum phase deviations between the mark-state and the space-state bits are used in this study. This study for the first time shows the imperfect-phase-recovery-induced power penalty as a function of laser linewidth with optimum phase deviations considered. It can be estimated from the theoretical result that an optimal balanced PLL receiver requires the laser linewidth as Δν⩽1.15×10^-6× (bit rate) in contrast to the previous reported one Δν⩽5.88×10^-6× (bit rate). We also point out here that the previously reported laser linewidth requirement was wrongly estimated     

TiAl基合金表面改性对高温抗氧化性的影响

研究了渗碳处理ＴｉＡｌ基合金试样的高温氧化行为，发现渗碳处理可以在ＴｉＡｌ基合金试样表层形成致密的多层结构的渗碳层，并发生表层Ａｌ、Ｔｉ重新分配。致密的渗碳层具有良好的高温抗氧化性和高温热稳定性，同时，Ｔｉ、Ａｌ重新分配形成的富Ａｌ最外层也能进一步提高合金的抗氧化性。     

基于Native Mode ATM API的应用系统模型及关键技术

ＡＴＭ技术作为Ｂ－ＩＳＤ的基础，在传输包括话音、图像、数据的综合业务环境中具有现有其它网络技术所不具备的技术优势，然而目前真正基于ＡＴＭＮａｔｉｖｅＭｏｄｅ的应用还很少，而大量基于Ｏｖｅｒｌａｙ Ｍｏｄｅ的ＡＴＭ应用不能充分发挥ＡＴＭ技术的优势。随着信息技术的发展，将会有大量的综合业务应用出现，它具有和传统数据通信安全不同的业务特性，必须通过一种灵活，高效的应用程序接口给予支持，本文提出基于Ｎａｔ     

Detection of congenital müllerian duct anomalies using three-dimensional ultrasound

PURPOSE: The purpose of this study was to assess the value of 3-dimensional sonography in the diagnosis of congenital müllerian duct anomalies, which cause infertility, preterm labor, and first trimester abortion. METHODS: A prospective study was undertaken in which 40 patients with histories of repeated spontaneous abortions or infertility were first examined using conventional 2-dimensional sonography or hysterosalpingography. Three-dimensional transvaginal sonography was then performed. RESULTS: Twenty-eight women had müllerian duct abnormalities, and 12 women had normal uterine anatomy. Müllerian duct defects detected in this study were unicornuate uterus (3), bicornuate uterus (3), complete or partial septate uterus (12), arcuate uterus (9), and didelphic uterus (1). The diagnosis of müllerian duct anomalies in these patients was confirmed by laparoscopic and/or hysteroscopic examinations. Three-dimensional sonography demonstrated all congenital uterine abnormalities with a sensitivity and specificity of 100%. Separate uterus and bicornuate uterus could be correctly diagnosed using 3-dimensional sonography in 11 (92%) of 12 cases and 3 (100%) of 3 cases, respectively. These 2 abnormalities were commonly confused with each other using hysterosalpingography and conventional sonography. CONCLUSIONS: Three-dimensional sonography with image reconstruction is less expensive and less invasive than hysterosalpingography for the assessment of uterine anatomy and diagnosis of müllerian duct abnormalities. The ability to visualize both the uterine cavity and the myometrium on a 3-dimensional scan facilitates the diagnosis of uterine anomalies and enables the differentiation of septate from bicornuate uteri for preoperative surgical planning.     

基于非线性规划的指数自回归模型的辨识

讨论了指数自回归模型的辨识问题，证明了该模型最小二乘估计的目标函数的非凸性，并给出了使该函数为凸的条件，最后给出了辨识该模型的算法及该算法的收敛性，并以数值例子加以说明。     

关于彩色火焰蜡烛的研制

本文阐述了利用焰色反应的原理研制彩色火焰蜡烛，着重分析并解决了在研制工作中出现的几个技术关键，如主燃剂的选取、蜡烛成型和强度、发色剂的选择与用量等．     

简易炉外处理在电炉钢生产中的应用

阐述了小电炉采用投资少，见较快，简单易行的炉外处理措施，提高了钢质量和生产率，生产实践和应用结果表明，本措施可为同类型企业的炼钢工艺完善和技术进步提供参考。     

Towards a generalized TLM algorithm for solving arbitraryreciprocal and nonreciprocal planar structures

A generalized transmission line matrix (TLM) algorithm is developed in the frequency domain to tackle arbitrary both reciprocal and nonreciprocal anisotropic waveguiding problems. In particular, the modeling issue for arbitrary planar structures is stressed in this work. A new three-dimensional (3-D) condensed node is used to consider the effect of both electric and magnetic constitutive tensors. Various results indicate how the modal dispersive behavior can be manipulated by changing not only the anisotropic characteristics of the substrate, but also the strip/slot geometry as well as the magnitude and orientation of the applied static magnetic field. The present algorithm is useful for CAD and simulation of a large class of gyrotropic waveguide-based microwave and millimeter-wave circuits