Influence of high power ultrasound on physical–chemical properties of polypropylene films aimed for food packaging: barrier and contact angle features

Investigation was focused on the impact of high power ultrasound (HPUS), also called thermosonication, on the oxygen permeation properties (permeability, solubility and diffusion coefficients) of barrier films aimed for food packaging. For this purpose, biaxially oriented polypropylene (BOPP) coated with acrylic/polyvinylidene chloride (BOPPAcPVDC) and biaxially oriented coextruded polypropylene (BOPPcoex) were used. The physical–chemical profile of the samples was determined using goniometry. There is a significant impact only of extreme HPUS conditions (the longest time and the highest amplitude) on the permeability, solubility and diffusion coefficients of oxygen through the BOPP films. The highest influence on the oxygen permeability in both investigated BOPP samples involved an HPUS with an amplitude of 100% during a 6 min treatment. However, BOPP samples showed different sensitivities at lower HPUS treatments. © 2017 Society of Chemical Industry     

Enhancing the efficiency of alternating current driven organic light-emitting devices by optimizing the operation frequency

We report efficient and bright organic light-emitting devices operated by capacitive energy coupling. In this approach, the organic layers are enclosed between sputter-deposited hafnium dioxide layers to prevent charge carrier injection. When a sinusoidal voltage signal is applied to the electrodes, the devices emit bright green light whereas no detectable emission is generated upon application of a constant voltage. The efficiency of the process depends heavily on the frequency of the applied voltage signal. By optimizing the driving scheme, a record luminous efficacy for AC driven OLEDs of 2.7 lm/W at 500 cd/m² is achieved.     

A review of motion planning algorithms for intelligent robots

Journal of Intelligent Manufacturing - Principles of typical motion planning algorithms are investigated and analyzed in this paper. These algorithms include traditional planning algorithms,...     

Capillary self-alignment of polygonal chips: a generalization for the shift-restoring force

Capillary-driven self-alignment using droplets is currently extensively investigated for self-assembly and microassembly technology. In this technique, surface tension forces associated to capillary pinning create restoring forces and torques that tend to bring the moving part into the alignment. So far, most studies have addressed the problem of square chip alignment on a dedicated patch of a wafer, aiming to achieve 3D microelectronics. In this study, we investigate the shift-restoring forces for more complex moving parts such as regular—convex and non-convex—polygons and regular polygons with regular polygonal cavities. A closed-form approximate expression is derived for each of these polygonal geometries; this expression agrees with the numerical results obtained with the Surface Evolver software. For small shifts, it is found that the restoring force does not depend on the shift direction or on the polygonal shape. In order to tackle the problem of microsystem packaging, an extension of the theory is done for polygonal shapes pierced with connection vias (channels), and a closed form of the shift-restoring force is derived for these geometries and again checked against the numerical model. In this case, the restoring force depends on the shift direction. Finally, a non-dimensional number, the shift number, is proposed that indicates the isotropic or anisotropic behavior of the chip according to the shift direction.     

Experiences in building a Grid-based platform to serve Earth observation training activities

Earth observation data processing and storing can be done nowadays only using distributed systems. Experiments dealing with a large amount of data are possible within the timeframe of a lesson and can give trainees the freedom to innovate. Following these trends and ideas, we have built a proof-of-the-concept platform, named GiSHEO, for Earth observation educational tasks. It uses Grid computing technologies to analyze and store remote sensing data, and combines them with eLearning facilities. This paper provides an overview of the GiSHEO's platform architecture and of its technical and innovative solutions.     

PhosphoTyrosyl Phosphatase Activator of Plasmodium falciparum: Identification of Its Residues Involved in Binding to and Activation of PP2A

In Plasmodium falciparum (Pf), the causative agent of the deadliest form of malaria, a tight regulation of phosphatase activity is crucial for the development of the parasite. In this study, we have identified and characterized PfPTPA homologous to PhosphoTyrosyl Phosphatase Activator, an activator of protein phosphatase 2A which is a major phosphatase involved in many biological processes in eukaryotic cells. The PfPTPA sequence analysis revealed that five out of six amino acids involved in interaction with PP2A in human are conserved in P. falciparum. Localization studies showed that PfPTPA and PfPP2A are present in the same compartment of blood stage parasites, suggesting a possible interaction of both proteins. In vitro binding and functional studies revealed that PfPTPA binds to and activates PP2A. Mutation studies showed that three residues (V²⁸³, G²⁹² and M²⁹⁶) of PfPTPA are indispensable for the interaction and that the G²⁹² residue is essential for its activity. In P. falciparum, genetic studies suggested the essentiality of PfPTPA for the completion of intraerythrocytic parasite lifecycle. Using Xenopus oocytes, we showed that PfPTPA blocked the G2/M transition. Taken together, our data suggest that PfPTPA could play a role in the regulation of the P. falciparum cell cycle through its PfPP2A regulatory activity.     

Experimental comparison of new adaptive PI controllers based on the ultra-local model parameter identification

This paper is devoted to an experimental comparison between two different methods of ultra-local model control. The concept of the first proposed technique is based on the linear system resolution technique to estimate the ultra-local model parameters. The second proposed method is based on the linear adaptive observer which allows the joint estimation of state and unknown system parameters. The closed-loop control is implemented via an adaptive PID controller. In order to show the efficiency of these two control strategies, experimental validations are carried out on a two-tank system. The experimental results show the effectiveness and robustness of the proposed controllers.     

Experiments and Simulations on the Cleaning of a Swellable Soil in Plane Channel Flow

ABSTRACT

The cleaning behavior of a soil with physical properties that depend on the wetting time is studied experimentally via the local phosphorescence detection method and simulated numerically in fully developed plane channel flow for Reynolds numbers up to 30,000. A computationally inexpensive general cleaning model is proposed, adopting an existing removal model and coupling it to the turbulent flow field. The influence of the soil on the flow is neglected and the transient behavior of the soil during cleaning is modeled in the form of a transient Dirichlet boundary condition. This approach is innovative for computational fluid dynamics of this phenomenon. The way of determining the model parameters from the experiment is described. The comparison of the simulation results with experimental data reveals very good suitability of the model in the case of a starch soil. A similar good agreement is found for data for a model protein foulant in tube flow from the literature.     

The landing gear case study: challenges and experiments

International Journal on Software Tools for Technology Transfer -     

Geometric adaption of biodegradable magnesium alloy scaffolds to stabilise biological myocardial grafts. Part I

Synthetic patch materials currently in use have major limitations, such as high susceptibility to infections and lack of contractility. Biological grafts are a novel approach to overcome these limitations, but do not always offer sufficient mechanical durability in early stages after implantation. Therefore, a stabilising structure based on resorbable magnesium alloys could support the biological graft until its physiologic remodelling. To prevent early breakage in vivo due to stress of non-determined forming, these scaffolds should be preformed according to the geometry of the targeted myocardial region. Thus, the left ventricular geometry of 28 patients was assessed via standard cardiac magnetic resonance imaging (MRI). The resulting data served as a basis for a finite element simulation (FEM). Calculated stresses and strains of flat and preformed scaffolds were evaluated. Afterwards, the structures were manufactured by abrasive waterjet cutting and preformed according to the MRI data. Finally, the mechanical durability of the preformed and flat structures was compared in an in vitro test rig. The FEM predicted higher durability of the preformed scaffolds, which was proven in the in vitro test. In conclusion, preformed scaffolds provide extended durability and will facilitate more widespread use of regenerative biological grafts for surgical left ventricular reconstruction.