Improvement of shape stability by high-temperature treatment of Norway spruce Effects of drying at 120 °C with and without restraint on twist

During drying, timber changes its shape mainly due to shrinkage anisotropy, radial differences in longitudinal shrinkage and spiral grain. The warp, causing severe downgrading of the timber, can be reduced by restraint and appropriate climate treatments of different types. The research presented here is part of a larger project on the improvement of shape stability of Norway Spruce (Picea abies) by high-temperature treatment. In this part, a method for determining twist as well as results for a drying temperature of 120 °C are presented. The effects of presteaming, drying and steaming with and without restraint on the size of twist in Norway Spruce were investigated in laboratory scale. Short-term twist-reducing effects as well as the permanency of the reduced distortions in subsequent moisture cycling were investigated. Results show a clear dependency of twist on the distance from the pith. Furthermore, the twist is reduced in restrained specimens sawn close to the pith. This effect is permanent even after exposure to subsequent moisture cycling.     

Physical degradation of genomic DNA of soybean flours does not impair relative quantification of its transgenic content

In this paper, four different physical treatments (microwaves, heating by conduction, sonication and pressure autoclaving) were performed to degrade a pure DNA extract, and their influence on GMO quantification was studied. The aim was to check the hypothesis that processing of agrofood products results in a similar degradation rate for both the transgenic target and the specific target. Indeed we could observe that even if the used physical treatments could lead to a significant increase of C _t values for both transgenic and specific targets, the resulting ΔC _t remained stable. So, the main conclusion of the study is that the aforementioned hypothesis seems valid and thus a physical degradation of DNA will not affect the relative quantitation of the GMO content, provided that both the specific and transgenic targets have very similar size. A second important issue of the experiments performed was that DNA is a very robust molecule as it is extremely difficult to reach a mean size below 100 bp. The study also gives evidence of the importance of using small targets.     

Effect of phytic acid degradation by soaking and exogenous phytase on the bioavailability of magnesium and zinc from Pisum sativum, L.

The effect of dephytinization of Pisum sativum, L. flour on the bioavailability of Mg and Zn was evaluated in growing rats. Processing of legume flours under optimal conditions for phytase activity (pH 5.5, 37 °C, 60 min) and subsequent removal of the soaking solution led to a 42 and 61% reduction in the content of Mg and Zn, respectively. Treatment with phytase led to an additional reduction in the concentration of the above-mentioned seed flour components, compared to the raw pea flour (69% and 74% for Mg and Zn, respectively). The considerable reduction in the content of inositol phosphates with high degree of phosphorylation attained under both processing conditions did not affect the digestive utilization of Mg, whereas the metabolic utilization of this mineral increased significantly. The digestive and metabolic utilization of Zn increased significantly in response to both processes assayed, reaching the highest values in the experimental group that was fed the phytase-treated pea flour diet. The amount of Mg retained by the experimental animals was reflected in the content of this mineral in the different tissues studied (femur, sternum, kidney, and heart), whereas no correlation was found in the case of Zn.     

A data base management system for industrial process control

Present-day systems for monitoring energy distribution must be capable of handling continuous changes in the structure and the extent of the data. Only a data base system which satisfies the special requirements of process control can cope with this. The process real-time information management System for on-line Control (PRIMO) data base system described here is implemented on DEC PDP-11 computers from $\text{11}\text{34}$ upwards and is used for process control in Brown Boveri energy control software systems.     

Reduction of immunoreactivity of bovine beta-lactoglobulin upon combined physical and proteolytic treatment

Bovine beta-lactoglobulin was hydrolyzed with trypsin or chymotrypsin before, during and after treatment at 600 MPa and pH 6.8 for 10 min at 30, 37 and 44 degrees C. The extent of beta-lactoglobulin hydrolysis under pressure was noticeably higher than at atmospheric pressure, particularly when chymotrypsin was used. Addition of proteases at ambient pressure to previously pressure-treated beta-lactoglobulin gave only a modest increase in proteolysis with respect to the untreated protein. Products of enzyme hydrolysis under pressure were separated by reverse-phase HPLC, and were found to be different from those obtained at atmospheric pressure when chymotrypsin was used. The residual immunochemical reactivity of the products of combined pressure-enzyme treatment was assessed on the unresolved hydrolysates by ELISA tests using polyclonal and monoclonal antibodies, and on individual hydrolytic fractions by Western Blotting using sera of paediatric patients allergic to whey proteins in cow milk. The immunoreactivity of the whole hydrolysates was related to their content of residual intact beta-lactoglobulin, and no immunochemical reactivity was found for all the products of chymotrypsin hydrolysis under pressure. The results indicate that chymotrypsin effectively hydrolysed hydrophobic regions of beta-lactoglobulin that were transiently exposed during the pressure treatments and that were not accessible in the native protein or in the protein that had been previously pressure treated.     

Growth and germination of proteolytic Clostridium botulinum in vegetable-based media

The growth of proteolytic Clostridium botulinum from spore inocula and changes in spore counts in mushroom, broccoli, and potato purées were monitored. Four strains of proteolytic C. botulinum types A and B were inoculated separately at approximately 10(4) spores per ml in nutrient broth and vegetable purées incubated at 15, 20, and 30 degrees C for up to 52 days. The times for the cell populations to increase 1,000-fold (T1,000) in the tested vegetables (1 to 5 days at 30 degrees C, 3 to 16 days at 20 degrees C, 7 to > 52 days at 15 degrees C) were similar to those for meat or fish. Only temperature significantly influenced growth rate. In contrast, the lag phase depended on the strains and media tested, in addition to temperature. Lag times and T1,000S for proteolytic C. botulinum were longer for potato and broccoli purées than for mushroom purée. These differences were not related to different pHs or redox potentials. The germination level, evaluated as the decrease in the spore count, was low. The addition of a germinant mixture (L-cysteine, L-alanine, and sodium lactate) to some strains inoculated in vegetable purées resulted in an increase in germination, suggesting a lack of germination-triggering agents in the vegetable purées.     

Quality control of Aspergillus flavus and A. parasiticus agar and comparison with dichloran 18% glycerol agar: a collaborative study

AFPA culture medium, which is used for recognition of Aspergillus flavus and A. parasiticus, has been validated in a collaborative study including nine laboratories located in Australia, Brazil, Denmark, The Netherlands, Sweden and United Kingdom. Three freeze-dried fungal mixtures, containing A. flavus/A. parasiticus and background fungi, were produced and checked for homogeneity. The coefficients of variance were low, ranging from 0.81% to 1.09% for total fungal counts and between 2.50% and 2.72% for counts of A. flavus/A. parasiticus. The laboratories analysed the contents of two vials of each mixture on commercial A. flavus and A. parasiticus agar (AFPA), in-house-made AFPA, and on a standard media, dichloran 18% glycerol agar (DG18). Reproducibility values for counts of A. flavus/A. parasiticus indicated no differences between the commercial AFPA and the in-house-made AFPA. Variation between laboratories was low, indicating that the medium was effective in use. Reproducibility values for DG18 were higher. There were no differences in counts of A. flavus/A. parasiticus on AFPA and DG18. However, DG18 gave slightly higher total fungal counts compared to AFPA.