Towards high efficiency video coding: Subjective evaluation of potential coding technologies

This paper describes the details and the results of the subjective quality evaluation performed at EPFL, as a contribution to the effort of the joint collaborative team on video coding (JCT-VC) for the definition of the high efficiency video coding (HEVC) standard. The performance of twenty-seven coding technologies has been evaluated with respect to two H.264/MPEG-4 AVC anchors, for high definition (HD) test material. The test campaign involved a total of 494 naive observers and took place over a period of four weeks. While similar tests have been conducted as part of the standardization process of previous video coding technologies, the test campaign described in this paper is by far the most extensive in the history of video coding standardization. A detailed statistical analysis of the subjective results is provided. The results show high consistency and support an accurate comparison of the performance of the different coding technologies.     

An Adaptive Control System to Deliver Interactive Virtual Environment Content to Handheld Devices

Wireless communication advances have enabled emerging video streaming applications to mobile handheld devices. For example, it is possible to display and interact with complex 3D virtual environments on mobile devices that don’t have enough computational and storage capabilities (e.g. smart phones, PDAs) through remote rendering techniques, where a server renders 3D data and streams the corresponding image flow to the client. However, due to fluctuations in bandwidth characteristics and limited mobile device CPU capabilities, it is extremely challenging to design effective systems for streaming interactive multimedia over wireless networks. This paper presents a novel approach based on a controller that can automatically adjust streaming parameters basing on feedback measures from the client device. Experimental results prove the effectiveness of the proposed solution in coping with bandwidth changes, thus providing high Quality of Service (QoS) in remote visualizations.     

Hybrid and optical packet switching supporting different service classes in data center network

Photonic Network Communications - Optical packet switching is a prominent technology proposing not only a reduction in the energy consumption by the elimination of numerous...     

Push &; Pull: autonomous deployment of mobile sensors for a complete coverage

Mobile sensor networks are important for several strategic applications devoted to monitoring critical areas. In such hostile scenarios, sensors cannot be deployed manually and are either sent from a safe location or dropped from an aircraft. Mobile devices permit a dynamic deployment reconfiguration that improves the coverage in terms of completeness and uniformity. In this paper we propose a distributed algorithm for the autonomous deployment of mobile sensors called Push & Pull. According to our proposal, movement decisions are made by each sensor on the basis of locally available information and do not require any prior knowledge of the operating conditions or any manual tuning of key parameters. We formally prove that, when a sufficient number of sensors are available, our approach guarantees a complete and uniform coverage. Furthermore, we demonstrate that the algorithm execution always terminates preventing movement oscillations. Numerous simulations show that our algorithm reaches a complete coverage within reasonable time with moderate energy consumption, even when the target area has irregular shapes. Performance comparisons between Push & Pull and one of the most acknowledged algorithms show how the former one can efficiently reach a more uniform and complete coverage under a wide range of working scenarios.     

Electric‐Field‐Controlled Alignment of Rod‐Shaped Fluorescent Nanocrystals in Smectic Liquid Crystal Defect Arrays

Periodic micro‐arrays of straight linear defects containing nanoparticles can be created over large surface areas at the transition from the nematic to smectic‐A phase in a nanoparticle–liquid crystal (LC) composite material confined under the effect of conflicting anchoring conditions (unidirectional planar vs normal) and electric fields. Anisomeric dichroic dye molecules and rod‐shaped fluorescent semiconductor nanocrystals (dot‐in‐rods) with large permanent electric dipole and high linearly polarized photoluminescence quantum yield align parallel to the local LC molecular director and follow its reorientation under application of the electric field. In the nano‐sized core regions of linear defects, where the director is undefined, anisotropic particles align parallel to the defect whereas spherical quantum dots do not show any particular interaction with the defect. Under application of an electric field, ferroelectric semiconductor nanoparticles in the core region align along the field, perpendicular to the defect direction, whereas dichroic dyes remain parallel to the defect. This study provides useful insights into the complex interaction of anisotropic nanoparticles and anisotropic soft materials such as LCs in the presence of external fields, which may help the development of field‐responsive nanoparticle‐based functional materials.     

Boosting Perovskite Solar Cells Performance and Stability through Doping a Poly‐3(hexylthiophene) Hole Transporting Material with Organic Functionalized Carbon Nanostructures

Perovskite solar cells (PSCs) are demonstrating great potential to compete with second generation photovoltaics. Nevertheless, the key issue hindering PSCs full exploitation relies on their stability. Among the strategies devised to overcome this problem, the use of carbon nanostructures (CNSs) as hole transporting materials (HTMs) has given impressive results in terms of solar cells stability to moisture, air oxygen, and heat. Here, the use of a HTM based on a poly(3‐hexylthiophene) (P3HT) matrix doped with organic functionalized single walled carbon nanotubes (SWCNTs) and reduced graphene oxide in PSCs is proposed to achieve higher power conversion efficiencies (η = 11% and 7.3%, respectively) and prolonged shelf‐life stabilities (480 h) in comparison with a benchmark PSC fabricated with a bare P3HT HTM (η = 4.3% at 480 h). Further endurance test, i.e., up to 3240 h, has shown the failure of all the PSCs based on undoped P3HT, while, on the contrary, a η of ≈8.7% is still detected from devices containing 2 wt% SWCNT‐doped P3HT as HTM. The increase in photovoltaic performances and stabilities of the P3HT‐CNS‐based solar cell, with respect to the standard P3HT‐based one, is attributed to the improved interfacial contacts between the doped HTM and the adjacent layers.     

A New Modulation for Intrinsically Secure Radio Channel in Wireless Systems

One of the biggest challenges in RFID (radio frequency identification) large scale deployment, such as in warehouse RFID deployment, is the positioning of RFID reader antennas to efficiently locate all the tagged objects distributed at RFID reader environment. This paper has investigated a novel location sensing system based on geometric grid covering algorithm that can use any passive or active RFID standard for positioning or tracking objects inside buildings. This study involves design of RFID reader antenna network which focuses on placing the reader antennas on a grid to cover all the tags distributed at two dimensional planes and position calculation using statistical averages algorithm. The statistical averages algorithm simply computes the location coordinates of the tagged object by statistical average of the reader antenna’s location. The proposed grid of reader antennas can assist in minimizing the actual number of reader antennas required for RFID large scale deployment. The proposed prototype system is a simpler positioning system which presents the solution of placement pattern of RFID reader antennas, gives less complicated mathematical calculation, and is able to provide a high degree of accuracy. The obtained results show that the proposed location sensing system can achieve better positioning accuracy as compared to existing positioning system and in some cases accuracy improvement of about 50% can be reached.

Chemical characterisation of Thymus populations belonging from Southern Italy

The genus Thymus L. consists of many species of herbaceous perennials and sub-shrubs. A chemical characterisation of a collection of Thymus spp. originated from regions of Southern Italy was performed using GC and GC/MS. The accessions were collected from various natural habitats of the Basilicata and Puglia Regions and transferred into a new uniform environment. The study showed that amongst the 22 components of the oils the most recurrent ones were geraniol, thymol and α-terpinene followed by linalool, citral and trans-caryophillene. Cluster analysis led to the identification of two chemotypes: geraniol and thymol/α-terpinene; only a biotype remained separate from all others, probably because of its high content linalool (58%).     

Peptides from water buffalo cheese whey induced senescence cell death via ceramide secretion in human colon adenocarcinoma cell line

Scope: Milk proteins are a source of bioactive peptides. Recent studies have indicated that protein‐derived peptides released in buffalo cheese acid whey exert a cytomodulatory effect in human epithelial colon cancer (CaCo2) cells. The aim of the present study was to explain the molecular mechanism involved in the response of CaCo2 cells to oxidative stress in the presence of peptide fractions of buffalo cheese whey, purified and characterized by mass spectrometry. Methods and results: We demonstrated that treatment of CaCo2 treated with H₂O₂ (H‐CaCo2) cells with a partially purified peptide sub‐fraction (f3) from buffalo cheese acid whey induced a reduction of mitochondrial superoxide anion with subsequent decrease in heat shock protein 70 and 90 expression. Moreover, we observed a 5‐fold decrease in cyclin A expression and cell cycle arrest in G1/G0 phases. These responses were associated with increased activity of alkaline phosphatase and beta‐galactosidase, markers of differentiation and senescence respectively. Conclusions: The structural characterization of the active peptide fraction and the elucidation of the effects induced by its treatment on H‐CaCo2 cells in vitro demonstrated an activity of this peptide sub‐fraction in the modulation of cell cycle, thus suggesting potential application for the development of nutraceuticals as well as health‐promoting functional foods.