Myocardial perfusion SPECT using the prone position improves inferior wall counts and decreases motion problems as compared with the usual supine position. Nonetheless, it is not suitable for women. In addition, it is associated with artifactual anteroseptal defects and hot spots. METHODS: The right lateral (RL) position was evaluated instead of the prone position in 72 patients (26 women). RL imaging was performed immediately after the supine imaging during a routine 2-day 99mTc-sestamibi exercise protocol. The SPECT images were scored semiquantitatively by three physicians. Moreover, regional myocardial counts, as well as extent and severity of defects, were assessed by quantitative polar map analysis. RESULTS: All patients tolerated the RL position well and there was no significant patient movement in either position. Higher inferior myocardial counts per pixel were observed in the RL than in supine images. Inferior wall defects (especially mild ones) were more common in the supine than the RL images, whereas defects in other regions were not different. Quantitative analysis confirmed these findings. Analysis of 34 patients with recent coronary arteriography revealed an overall coronary artery disease (CAD) supine- and RL-imaging specificity of 50% and 75%, respectively, and the sensitivities of both were 93%. Right CAD sensitivity, specificity and normalcy rates for the supine position were 100%, 44% and 55%, whereas those of the RL position were 94%, 75% and 90%, respectively. CONCLUSION: The RL position improves CAD diagnostic accuracy, particularly right CAD, without significant artifacts in other myocardial regions. Unlike the prone position, the RL position is well tolerated by both women and men. 相似文献
Superfluid3He in severely confined geometries is studied in the Ginzburg-Landau limit. Both A and B phases are analyzed in narrow slabs and in small cylinders. Physically measurable quantities include the superfluid density and the critical current, which are significantly suppressed by the boundaries. Related alterations in the phase diagram are also considered. For small lateral dimensions, the A phase can be favored even well below the polycritical pressure. 相似文献
The chemical durability of some selected glass-ceramic materials based on the Li2O- (MnO, CaO)MgO---Al2O3---SiO2 glass composition, has been determined by HCl, using the powder test.
The leachability of the glass-ceramic was gradually increased by replacing MgO with MnO, while it was decreased by addition of MnO instead of CaO. Calcium oxide had a retarding effect on the durability of the material when it was added instead of MgO and/or MnO. However, on the addition of Al2O3 in replacing Li2O, the durability of the material was markedly improved. The leaching data were found to be dependent mainly on the proportion of the glass oxide constituents i.e. MgO/MnO, CaO/MnO and Li2O/Al2O3 ratios present in the glasses.
The results were correlated to different views concerning the effect of various ions on the rate of interdiffusion between the crystalline-glass materials and leaching solution, the type, and proportions of the crystalline phases developed in glass-ceramics and residual glass phase. 相似文献
Phase transformations have been studied in glasses related in composition to Li2O-MgO-SiO2 (930° C) eutectic glass modified by replacement on a cation per cation basis. Crystallization processes and changes in the solid solutions of the mineral phases developed during the controlled heating of the glasses have been followed using X-ray and microscopic techniques.Solid solutions of lithia aluminosilicate phases (B-eucryptite and/or B-spodumene s.s.) are the essential minerals that crystallize in glasses through most of the heat treatment applied. Lithium metasilicate, disilicate, clinoenstatite and cordierite are also encountered.B-eucryptite s.s. is formed in early stage of crystallization of the glass which transforms into B-spodumene s.s. at higher temperature (800° C). However, in some cases, it persists at temperatures as high as 1000° C.Metastable B-eucryptite-B-quartz s.s. can accomodate considerable amounts of Mg2+ and Al3+ ions in its lattice especially at lower temperature. At higher temperature for long duration, a redistribution of the elements takes place, and the cordierite phase then developed. 相似文献
A design is described which enables the accurate alignment of high voltage plane parallel electrodes used in an ultra-high vacuum assembly. The main features of this design are that it effectively overcomes the eccentricities which are present in both the glass-to-metal graded seal used in the housing envelope and in the linear motion drives employed to vary the gap separation between the electrodes, as well as being relatively simple to fabricate. The present design has been successfully tested in two large chambers at applied voltages of up to 100 kV and at a background pressure of better than 10?9 torr. 相似文献
The formation of Taylor bubbles and resulting bubble lengths were studied in a ID vertical tube for air-water and air-octane systems. In the co-flow tube/nozzle arrangement two nozzle sizes were used as gas inlets. Superficial velocities varied between 0.001- for the liquid and 0.002- for the gas. Three different mechanisms of initial bubble formation were observed. Of the three mechanisms, mechanism 3 is periodic (with period consisting of a bubble and a liquid slug), reproducible and can be simply modelled. After initial bubble formation further modifications may occur in the formed bubble size by coalescence or pairing. Bubble pairing is encouraged by smaller nozzles and liquid flow rates, while coalescence is observed only for cases where non-Taylor bubbles form initially.Two simple models have been proposed, the first predicts the size of the Taylor bubbles formed by mechanism 3 while the second attempts to predict the condition for bubble pairing to occur. Reasonable agreement with experimental results validates the predictions of the first model for a strong dependence of the volume of Taylor bubbles formed on the gas and liquid flow rates, a moderate dependence on nozzle diameter and a weak dependence (if at all) on the surface tension of the liquid used. Mismatch with the experimental results is caused (at least in part) by the experimental setup where there was no perfect axial alignment of the gas inlet. The experiments also suffered from problems at the outlet at low flow rates where smooth bubble disengagement could not be ensured for long Taylor bubbles. The second model for pairing predicts its occurrence for concentric tube/nozzle arrangements as a function of flow rates and channel diameters. The model over-predicted the range of liquid flow rates at which pairing was observed experimentally, but it captured the form of the boundary between different bubble volume modification mechanisms when represented on superficial velocity graphs. 相似文献
A methodology is proposed to efficiently analyze substrate noise coupled to a sensitive block due to an aggressor digital block in large-scale mixed-signal circuits. The methodology is based on identifying voltage domains on the substrate by exploiting the small spatial voltage differences on the ground distribution network of the aggressor circuit. Specifically, similarly biased regions on the substrate short-circuited by the ground network are determined, and each of these regions is represented by a single equivalent input port to the substrate. The remaining ports within that domain are ignored to reduce the computational complexity of the extraction process. An algorithm with linear time complexity is proposed to merge those substrate contacts exhibiting a voltage difference smaller than a specified value, identifying a voltage domain. An equivalent contact is placed at the geometric mean of the merged contacts, ignoring all of the remaining ports such as the source/drain junctions of the devices. The ground network impedance is updated for each merged contact based on the proposed algorithm to maintain sufficient accuracy of the noise voltage. The substrate with reduced input ports is extracted using an existing extraction tool to analyze the noise at the sense node. As compared to the full extraction of an aggressor circuit, the methodology achieves a reduction of more than four orders of magnitude in the number of extracted substrate resistors with a peak-to-peak error of 24%. 相似文献
The sensitivity of optical orthogonal-frequency division multiplexing (OFDM) transmission to the finite resolutions of the digital-to-analog (DAC) and analog-to-digital converters (ADC) has been analyzed using numerical simulations. We show that for back-to-back configuration the requirements regarding the number of quantization bits for the DACs are similar to the ones of the ADCs. After transmission over metro and long-haul distances a higher resolution of the DAC/ADC is required compared to back-to-back configuration. We show that after transmission it is sufficient to enhance either the ADC resolution or the DAC resolution by 1 bit. 相似文献
In this paper, fundamental limits on time delay estimation are studied for cognitive radio systems, which facilitate opportunistic use of spectral resources. First, a generic Cramer-Rao lower bound (CRLB) expression is obtained in the case of unknown channel coefficients and carrier-frequency offsets (CFOs) for cognitive radio systems with dispersed spectrum utilization. Then, various modulation schemes are considered, and the effects of unknown channel coefficients and CFOs on the accuracy of time delay estimation are quantified. Finally, numerical studies are performed in order to verify the theoretical analysis. 相似文献