Cell‐loss control in multiplexing of VBR video over ATM networks

In this article we investigate the impacts of interspacing and source polling policies on the cell‐loss rates in transmission of variable bit rate video sources over Asynchronous Transfer Mode networks. We present a mathematical model that finds the approximate optimal starting times of the video sources that minimize the congestion at the multiplexer. Combined with the approximate optimal source starting times, we propose a source ordering and polling policy for reducing the cell‐loss rates. The proposed policy is tested against alternative policies using simulation of pre‐recorded video data. This revised version was published online in June 2006 with corrections to the Cover Date.     

Assessment of the site amplifications and predominant site periods for Saruhanlı, in an earthquake-prone region of Turkey

An earthquake-resistant design should include the effect of local site conditions on the seismic ground motions. In this study, ground response analyses in 22 locations around the developing town of Saruhanlı in the Aegean Region of Turkey were undertaken using SHAKE software. The ground response analyses for a typical soil profile considered various modulus reduction and damping curves including effective confining stress and a plasticity index dependent model. The confining stress-dependent soil models and shear-wave velocity profile resulted in higher amplification ratios and lower predominant periods. High acceleration ratios (>3) and lower predominant site periods were found in the eastern part of the site such that buildings of ten or more storeys would be severely damaged.     

Forced migration of soluble and suspended materials by freezing front in aqueous systems

Migration of soluble and suspended materials by directional freezing of aqueous systems has been studied qualitatively. Slow freezing was employed vertically as well as horizontally through solutions and suspensions. In all cases, the impurities (soluble salts as well as suspended materials) were appreciably forced out by dynamic freezing front. The phenomenon worked for concentrating/separating inorganic ions, soluble organic compounds and dyes in synthetic solutions as well as in natural streams. Various analytical techniques were employed to monitor the migrating species through the freezing media. It was found that separation efficiency depends on different factors like rate of cooling, pH and concentration. Model experiments were designed and exercised successfully to employ the technique for treatment of dye-polluted water.     

A new worm propagation threat in BitTorrent: modeling and analysis

Peer-to-peer (P2P) networking technology has gained popularity as an efficient mechanism for users to obtain free services without the need for centralized servers. Protecting these networks from intruders and attackers is a real challenge. One of the constant threats on P2P networks is the propagation of active worms. Recent events show that active worms can spread automatically and flood the Internet in a very short period of time. Therefore, P2P systems can be a potential vehicle for active worms to achieve fast worm propagation in the Internet. Nowadays, BitTorrent is becoming more and more popular, mainly due its fair load distribution mechanism. Unfortunately, BitTorrent is particularly vulnerable to topology aware active worms. In this paper we analyze the impact of a new worm propagation threat on BitTorrent. We identify the BitTorrent vulnerabilities it exploits, the characteristics that accelerate and decelerate its propagation, and develop a mathematical model of their propagation. We also provide numerical analysis results. This will help the design of efficient detection and containment systems.     

The Millimeter Wave Radiation of a Dielectric Leaky-Wave Antenna Coupled with a Diffraction Grating: Broad-Face Interaction

The millimeter wave radiation of a dielectric leaky-wave antenna (DLWA) coupled with a metallic diffraction grating with a sinusoidal height profile is experimentally investigated. The interaction between dielectric and grating is contactless and it is from the broad-face of the dielectric line. The measured field patterns are compared with the simulated HFSS patterns. Antenna parameters such as polarization, HPBW, cross-polarization and side lobe levels are measured. The effects of the geometrical parameters of the grating to the radiation are also investigated. Some results are compared with a DLWA which has another diffraction grating profile shape (rectangular). The investigated antenna can be used as a frequency scanning antenna in mm-wave radars because it has low cross and side lobe levels and narrow beam width.     

Generative regular-freeform surface recognition for generating material removal volume from stock model

The present paper illustrates the development of generative surface recognition for regular and freeform. To obtain the final form of product, material removal volume generation from a stock model is also discussed. Only a few studies integrated the regular and freeform surfaces to provide a comprehensive definition of surface recognition as well as for the volumetric estimation of removal material in finishing and roughing operations. The current research deploys a comprehensive surface recognition approach that can recognise both regular and freeform surfaces based on the geometry as well as loop entity of a face. In contrast to the regular surface that can be categorised into a particular group of geometrical shape, such as cylindrical shape, the proposed approach enables the recognition of a freeform surface that cannot be defined as a generic geometrical shape. In addition, the new method also simplifies the existing surface recognition for regular surfaces. The material removal volumes created consist of machining volumes for finishing and roughing operations needed to be machined to obtain the final form of the product. The present research provides a unique user customisation feature that enables user to specify the volumetric thickness for material removal volume in the finishing operation as well as the size for the stock model. These estimated volumes are prepared for subsequent manufacturing applications, such as sequencing of machining operation.     

Property enhancement in unsaturated polyester nanocomposites by using a reactive intercalant for clay modification

Polymeric nanocomposites were synthesized from unsaturated polyester (UPE) matrix and montmorillonite (MMT) clay using an in situ free radical polymerization reaction. Organophilic MMT was obtained using a quaternary salt of coco amine as intercalant having a styryl group making it a reactive intercalant. The resultant nanocomposites were characterized via X‐ray diffraction and transmission electron microscopy. The effect of increased nanofiller loading on the thermal and mechanical properties of the nanocomposites was investigated. All the nanocomposites were found to have improved thermal and mechanical properties as compared with neat UPE matrix, resulting from the contribution of nanolayer connected intercalant‐to‐crosslinker which allows a crosslinking reaction. It was found that the partially exfoliated nanocomposite structure with an exfoliation dominant morphology was achieved when the MMT loading was 1 wt %. This nanocomposite exhibited the highest thermal stability, the best dynamic mechanical performance and the highest crosslinking density, most probably due to more homogeneous dispersion and optimum amount of styrene monomer molecules inside and outside the MMT layers at 1 wt % loading. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Design and analysis of a fault tolerant hybrid mobile scheme

Mobile computing systems provide users with access to information regardless of their geographical location. In these systems, Mobile Support Stations (MSSs) play the role of providing reliable and uninterrupted communication and computing facilities to mobile hosts. The failure of a MSS can cause interruption of services provided by the mobile system. Two basic schemes for tolerating the failure of MSSs exist in the literature. The first scheme is based on the principle of checkpointing used in distributed systems. The second scheme is based on state information replication of mobile hosts in a number of secondary support stations. Depending on the replication scheme used, the second approach is further classified as a pessimistic or an optimistic technique. In this paper, we propose a hybrid scheme which combines the pessimistic and the optimistic replication schemes. In the proposed scheme, an attempt is made to strike a balance between the long delay caused by the pessimistic and the high memory requirements of the optimistic schemes. In order to find the best ratio between the number of pessimistic to the number of optimistic secondary stations in the proposed scheme, we used fuzzy logic. We also used simulation to compare the performance of the proposed scheme with those of the optimistic and the pessimistic schemes. Simulation results showed that the proposed scheme performs better than either schemes in terms of delay and memory requirements.