Uniform and position-controlled InAs nanowires on 2" Si substrates for transistor applications

This study presents a novel approach for indirect integration of InAs nanowires on 2' Si substrates. We have investigated and developed epitaxial growth of InAs nanowires on 2' Si substrates via the introduction of a thin yet high-quality InAs epitaxial layer grown by metalorganic vapor phase epitaxy. We demonstrate well-aligned nanowire growth including precise position and diameter control across the full wafer using very thin epitaxial layers (<300 nm). Statistical analysis results performed on the grown nanowires across the 2' wafer size verifies our full control on the grown nanowire with 100% growth yield. From the crystallographic viewpoint, these InAs nanowires are predominantly of wurtzite structure. Furthermore, we show one possible device application of the aforementioned structure in vertical wrap-gated field-effect transistor geometry. The vertically aligned InAs nanowires are utilized as transistor channels and the InAs epitaxial layer is employed as the source contact. A high uniformity of the device characteristics for numerous transistors is further presented and RF characterization of these devices demonstrates an f(t) of 9.8 GHz.     

Estimation of the risk for early thermal cracking for SCC containing fly ash

Cracking of concrete must be avoided during the hardening phase in order to minimize the risk of durability problems in the future, such as corrosion of the reinforcement, water tightness and damages due to frost. Estimation of the risk of early age cracking requires knowledge of the combined effects from temperature development and mechanical behaviour during the hydration. In the present paper, the influence of fly ash on the young concrete behaviour has been investigated. The concrete is based on a Swedish cement aimed for civil engineering structures, and the fly ash is of class F. A comparison of crack risks between concrete containing fly ash in different amounts with concrete without fly ash is presented. Also a previously tested concrete containing limestone filler is considered. The fly ash was added to replace a part of the aggregate, which gives a higher heat evolution. However, a numerical stress analysis showed that the risk for early age through cracking for a typical civil engineering structure is significantly decreased in the mixes containing fly ash. The denotation typical civil engineering structure is used here for concrete structures such as tunnels, bridges, and ramps of common cross-section dimensions. In the case of fly ash added to concrete by a partial replacement of cement, the crack risk will probably be further decreased. For a self-balancing structure of young concrete there is no restraint from adjacent structures, and the temperature and moisture gradients within the young concrete cause self-stresses governed by equilibrium with zero external forces for any cut. The estimated risk for surface cracking on a self-balancing wall or slab was not improved by an addition of fly ash. It is probably an effect of the increased heat development, which most likely counteracts the positive effect of the increased early age creep for concrete containing fly ash. If the heat evolution decreases when cement is partly replaced with fly ash, the use of fly ash might reduce the risk of surface cracks.     

A corrosion study of nanocrystalline copper thin films

Thin nanocrystalline, compact films, based on the copper–nitrogen system, up to 2.5 μm thickness and 3.5% nitrogen, were deposited by magnetron sputtering at different partial pressure ratios of N₂ and Ar, without formation of Cu_xN compounds, the nitrogen concentration influencing grain size (down to 30 nm) and film homogeneity. Electrochemical corrosion properties were investigated using polarization curves and electrochemical impedance spectroscopy in 0.5 M NaCl aqueous solution, and compared with pure bulk copper; morphology was examined by scanning electron microscopy. Significant variations in corrosion currents between samples were attributed to grain size and structural defects on the grain boundaries.     

NiCrSiBC alloy: microstructure and hardness of coatings processed by arc and laser

The processing technique is decisive for the characteristics of a coating. This is because the heat supply, which depends on the technique and on the parameters, has an influence on the dilution and the solidification rate. In alloys with low metallurgical complexity, the effect of processing with deposition techniques that give a higher cooling rate may be translated into refining of the microstructure. A more refined microstructure is expected to result in higher mechanical strength of the coating. However, in the deposition of alloys that are more complex metallurgically this does not always occur, because the high cooling rate may suppress formation/precipitation of phases responsible for strength. The influence of processing on the microstructure and hardness of coatings of alloy Colmonoy-6^® was assessed in this study. The alloy was processed by plasma transferred arc and high-power diode laser on plates of AISI 304 with two levels of dilution. In both cases, good-quality, defect-free coatings were obtained. Increase in Fe content (dilution) and different cooling rates result from processing with different parameters and techniques. This leads to significant changes in microstructure and hardness of the coatings, associated with the distribution, morphology and chemical composition of the carbides and particularly of the borides.     

Reaction zone formed during diffusion bonding of TiNi to Ti6Al4V using Ni/Ti nanolayers

This study investigated the interfacial structure of solid state diffusion bonding of TiNi to Ti6Al4V using reactive Ni/Ti multilayer thin films. The TiNi and Ti6Al4V surfaces were modified by sputtering, by deposition of alternated Ni and Ti nanolayers, to increase the diffusivity at the interface. Bonding experiments were performed at 750, 800 and 900 °C at a pressure of 10 MPa with a dwell time of 60 min. The reaction zone was characterized by high-resolution scanning and transmission electron microscopy. Joints free from porosity and cracks were produced with Ni/Ti reactive multilayer thin films. Several phases formed at the interface, ensuring the bonding of these alloys. The reaction zone was constituted by columnar grains of Ti₂Ni and AlNi₂Ti, close to the Ti6Al4V base material, and by alternate layers of Ti₂Ni and TiNi equiaxed grains. The grain size decreased from Ti6Al4V to TiNi base materials. Nanometric grains were observed in the layers closest to the TiNi base material.     

Discovery of novel non-cyclam polynitrogenated CXCR4 coreceptor inhibitors

HIV cell fusion and entry have been validated as targets for therapeutic intervention against infection. Bicyclams were the first low-molecular-weight compounds to show specific interaction with CXCR4. The most potent bicyclam was AMD3100, in which the two cyclam moieties are tethered by a 1,4-phenylenebis(methylene) bridge. It was withdrawn from clinical trials owing to its lack of oral bioavailability and cardiotoxicity. We have designed a combinatorial library of non-cyclam polynitrogenated compounds by preserving the main features of AMD3100. At least two nitrogen atoms on each side of the p-phenylene moiety, one in the benzylic position and the other(s) in the heterocyclic system were maintained, and the distances between them were similar to the nitrogen atom distances in cyclam. A selection of diverse compounds from this library were prepared, and their in vitro activity was tested in cell cultures against HIV strains. This led to the identification of novel potent CXCR4 coreceptor inhibitors without cytotoxicity at the tested concentrations.     

The corrin moiety of coenzyme B12 is the determinant for switching the btuB riboswitch of E. coli

Riboswitches are regulatory elements in the 5'-untranslated region (5'-UTR) of bacterial mRNAs that bind certain metabolites with high specificity and affinity. The 202 nucleotide (nt)-long btuB riboswitch RNA of E. coli interacts specifically with coenzyme B12 and its derivatives thereby leading to changes in the RNA structure and hence to an altered expression of the downstream btuB gene. We report the investigations of the rearrangement of the three-dimensional structure of the btuB riboswitch upon binding to four different B12 derivatives: coenzyme B12, vitamin B12, adenosyl factor A and adenosyl-cobinamide. In-line probing experiments have shown that the corrin ring plays the crucial role in switching the three-dimensional riboswitch structure. Instead, the apical ligands influence only the binding affinity of the B12 derivative to the btuB riboswitch.     

Structure Formation of Integral Asymmetric Composite Membranes of Polystyrene‐block‐Poly(2‐vinylpyridine) on a Nonwoven

The formation of an integral asymmetric membrane composed of a cylinder‐forming polystyrene‐block‐poly(2‐vinylpyridine) on a nonwoven by using solvent casting followed by solvent/nonsolvent exchange (phase inversion) is reported for the first time. The influence of parameters such as solvent composition, evaporation time of the solution‐cast block copolymer film before phase inversion, and immersion bath temperature is demonstrated. The optimized membranes are characterized in terms of stimuli‐responsive water flux properties. The morphologies of the membranes as well as of the bulk of the block copolymer are imaged by scanning force microscopy, scanning electron microscopy, and transmission electron microscopy.

     

Synthesis and Biological Studies of Pyrazolyl‐Diamine PtII Complexes Containing Polyaromatic DNA‐Binding Groups

New [PtCl(pz*NN)]ⁿ⁺ complexes anchored by pyrazolyl‐diamine (pz*NN) ligands incorporating anthracenyl or acridine orange DNA‐binding groups have been synthesized so as to obtain compounds that would display synergistic effects between platination and intercalation of DNA. Study of their interaction with supercoiled DNA indicated that the anthracenyl‐containing complex L²Pt displays a covalent type of binding, whereas the acridine orange counterpart L³Pt shows a combination of intercalative and covalent binding modes with a strong contribution from the former. L²Pt showed a very strong cytotoxic effect on ovarian carcinoma cell lines A2780 and A2780cisR, which are, respectively, sensitive to and resistant to cisplatin. In these cell lines, L²Pt is nine to 27 times more cytotoxic than cisplatin. In the sensitive cell line, L³Pt showed a cytotoxic activity similar to that of cisplatin, but like L²Pt was able significantly to overcome cisplatin cross‐resistance. Cell‐uptake studies showed that L²Pt accumulates preferentially in the cytoplasm, whereas L³Pt reaches the cell nucleus more easily, as clearly visualized by time‐lapse confocal imaging of live A2870 cells. Altogether, these findings seem to indicate that interaction with biological targets other than DNA might be involved in the mechanism of action of L²Pt because this compound, despite having a weaker ability to target the cell nucleus than L³Pt , as well as an inferior DNA affinity, is nevertheless more cytotoxic. Furthermore, ultrastructural studies of A2870 cells exposed to L²Pt and L³Pt revealed that these complexes induce different alterations in cell morphology, thus indicating the involvement of different modes of action in cell death.     

Outlines

How should architects hammer out their own personal design approach in relation to a wider cultural identity? Chilean architects Mauricio Pezo and Sofia von Ellrichshausen of Pezo von Ellrichshausen outline how their first years of practice have been dedicated to developing their own specific working methods. Drawing on the physical experience of space, their own evocative thoughts and sensations, they transform the simple natural structures of their local surrounding into idealised forms.