Distribution of lead between copper and matte and the activity of PbS in copper-saturated mattes

The distribution coefficients of lead between copper and matte phases have been measured at 1405 and 1505 K and correlated with lead and iron concentrations in metallic copper and matte. Experiments covered the ranges of 0.009 to 1.8 and 0 to 11 wt pct lead and iron in matte, respectively. Distribution coefficients of lead between copper and iron-free matte, at infinite dilution of lead, have been determined to be 3.60 and 4.06 at 1505 and 1405 K, respectively. From the measured values of distribution coefficients, the Raoultian activity coefficients of PbS in copper-saturated matte have been calculated. At the temperatures and matte compositions investigated, activities of PbS deviate negatively from Temkin's ideality. At infinite dilution, the following equation correlating the Raoultian activity coefficients of PbS, , with matte composition and temperature has been obtained: In , whereN _FeS , is the mole fraction of FeS in the Cu₂S-FeS-PbS matte. The present values of γ _PbS ^o must be used exclusively in conjunction with the following Gibbs free energy of formation: Pb(l) + 1/2S₂(g) = PbS(l); ΔGℴ = −26730 + 12.20T (cal/mol). M. NAGAMORI, Formerly Associate Professor of Metallurgy at The University of Utah,     

Correlation between acidic properties of nickel sulfate supported on TiO2-ZrO2 and catalytic activity for ethylene dimerization

A series of catalysts, NiSO₄/TiO₂-ZrO₂, for ethylene dimerization was prepared by the impregnation method using an aqueous solution of nickel sulfate. For NiSO₄/TiO₂ -ZrO₂ sample, no diffraction line of nickel sulfate was observed up to 30 wt%, indicating good dispersion of nickel sulfate on the surface of TiO₂-ZrO₂. The addition of nickel sulfate to TiO₂-ZrO₂ shifted the phase transition of TiZrO₄ from amorphous to orthorhombic to a higher temperature because of the interaction between nickel sulfate and TiO₂-ZrO₂. The number of acid sites of NiSO₄/TiO₂-ZrO₂ increased in proportion to the nickel sulfate content up to 20 wt% of NiSO₄. Nickel sulfate supported on TiO₂-ZrO₂ was found to be very active even at room temperature, giving a maximum in both activity and acidity when the catalyst containing 20% NiSO₄ was calcined and evacuated at 500°C The asymmetric stretching frequency of the S=O bonds for NiSO₄/TiO₂-ZrO₂ samples was related to the acidic properties and catalytic activity. That is, the higher the frequency, the higher both the number of acid sites and the catalytic activity for ethylene dimerization.     

Content-based mobile spam classification using stylistically motivated features

The feature of brevity in mobile phone messages makes it difficult to distinguish lexical patterns to identify spam. This paper proposes a novel approach to spam classification of extremely short messages using not only lexical features that reflect the content of a message but new stylistic features that indicate the manner in which the message is written. Experiments on two mobile phone message collections in two different languages show that the approach outperforms previous content-based approaches significantly, regardless of language.     

Effect of near-critical swirl on the Burke-Schumann reaction sheet

The influence of swirl on the shape of the Burke-Schumann reaction sheet in a straight cylindrical pipe is investigated by asymptotic and numerical means. Attention is confined to swirl levels that are near the critical value at which vortex breakdown occurs. A high-Reynolds-number, laminar, isothermal, low-Mach-number reacting flow is considered. An asymptotic analysis is developed to study the nonlinear interaction between near-critical swirl and mixture fraction distribution within the flow. It is first shown that leading-order perturbation of the velocity field from the columnar state, generated by the interaction of near-critical swirl and low viscosity, can be described by a nonlinear reduced-order model. This flow perturbation is computed, and then employed to determine the correction to the classical Burke-Schumann solution. Under lean conditions of reaction the reaction sheet becomes shorter and more compact as swirl is increased. For rich conditions of reaction, increasing swirl first causes the reaction-sheet length to decrease, and then increase after vortex breakdown has appeared. Numerical simulations of the flow and reaction-zone shape are substantiated by, and supplement, the asymptotic results.     

Testing digital safety system software with a testability measure based on a software fault tree

Using predeveloped software, a digital safety system is designed that meets the quality standards of a safety system. To demonstrate the quality, the design process and operating history of the product are reviewed along with configuration management practices. The application software of the safety system is developed in accordance with the planned life cycle. Testing, which is a major phase that takes a significant time in the overall life cycle, can be optimized if the testability of the software can be evaluated. The proposed testability measure of the software is based on the entropy of the importance of basic statements and the failure probability from a software fault tree. To calculate testability, a fault tree is used in the analysis of a source code. With a quantitative measure of testability, testing can be optimized. The proposed testability can also be used to demonstrate whether the test cases based on uniform partitions, such as branch coverage criteria, result in homogeneous partitions that is known to be more effective than random testing. In this paper, the testability measure is calculated for the modules of a nuclear power plant's safety software. The module testing with branch coverage criteria required fewer test cases if the module has higher testability. The result shows that the testability measure can be used to evaluate whether partitions have homogeneous characteristics.     

A 231-MHz, 2.18-mW 32-bit Logarithmic Arithmetic Unit for Fixed-Point 3-D Graphics System

A 32-bit fixed-point logarithmic arithmetic unit is proposed for the possible application to mobile three-dimensional (3-D) graphics system. The proposed logarithmic arithmetic unit performs division, reciprocal, square-root, reciprocal-square-root and square operations in two clock cycles and powering operation in four clock cycles. It can program its number range for accurate computation flexibility of 3-D graphics pipeline and eight -region piecewise linear approximation model for logarithmic and antilogarithmic conversion to reduce the operation error under 0.2%. Its test chip is implemented by 1-poly 6-metal 0.18-mum CMOS technology with 9-k gates. It operates at the maximum frequency of 231 MHz and consumes 2.18 mW at 1.8-V supply     

The reduction of iron oxides by volatiles in a rotary hearth furnace process: Part I. The role and kinetics of volatile reduction

With iron ore reduction processes using coal-ore pellets or mixtures, it is possible that volatiles can contribute to reduction. By simulating the constituents of the individual reducing species in the volatiles, the rates for H₂ and CO were investigated in the temperature and reduction range of interest; hydrogen is the major reductant and was studied in detail. The kinetics of the reduction by H₂ has been found to be a complex mechanism with, initially, nucleation and growth controlling the rate. There is a catalytic effect by the existing iron nuclei, followed by a mixed control of chemical kinetics and pore diffusion. This results in a topochemical reduction of these iron oxide particles. Up to 1173 K, reduction by H₂ is considerably faster than by carbon in the pellet/mixture or by CO. It was also found that H₂S, which is involved with the volatiles, does not affect the rate at the reduction range of interest.     

Numerical investigation on the heat transfer characteristics of a liquid-metal pool subjected to a partial solidification process

The main purpose of this paper is to investigate numerically the effects of solidification on the heat transfer characteristics of the liquid metal layer, for use in accident analyses. The situation is very similar to an overlying liquid melt pool that could be fooned in the reactor lower head during the late phase of a severe nuclear accident. Based on a computational model, MPCOOL, the numerical predictions were then assessed through a comparison with the experimental data that was obtained with various boundary temperature conditions and geometrical aspect ratios, especially for the Ra-Nu relationship. For the cases with solidification, the results of the comparison show that(a) the computational model does show a good agreement with heat transter rates inferred from the experimental data, with a few exceptions at the Ra numbers which suggest a turbulent transport; and also (b) the computational model underpredicts the heat transfer rates by about 6% than that inferred from the experimental data when it is integrally evaluated with the Ra-Nu correlation. The foregoing results are mainly due to the currently limited applicability of the computational model up to the laminar-to-turbulence transition flows and its application to the turbulence flows because it is always subjected to a model uncertainty between the laminar and turbulence. Next, an additional comparison for the cases with and without solidification was made to examine the effects of the solidification on the energy partition within the liquid metal layer and its effects on the directional heat transfer rates. The results of the comparison show that the computational model for the case without solidification predicts higher heat transfer rates by about 15% than when solidification is included, but there isn't any experimental data that directly supports this trend.     

DEA based multi-period evaluation system for research in academia

Various types of incentive systems are widely used by many companies and organizations for better performances. However, despite the demand for the fair incentive systems, those systems in academia have not been well established and fairly operated. Using an example of a professor evaluation system, we examine two main problems of the existing incentive systems in academia – ignoring the input aspect and focusing only on the short-term performance. By applying the super-efficiency DEA and considering multi-period output, we show that the input factors and the time trend of outcomes need to be incorporated for the fair evaluation of professors and their research performance.