The Effect of Gradual Fluorination on the Properties of FnZnPc Thin Films and FnZnPc/C60 Bilayer Photovoltaic Cells

Motivated by the possibility of modifying energy levels of a molecule without substantially changing its band gap, the impact of gradual fluorination on the optical and structural properties of zinc phthalocyanine (F_nZnPc) thin films and the electronic characteristics of F_nZnPc/C₆₀ (n = 0, 4, 8, 16) bilayer cells is investigated. UV–vis measurements reveal similar Q‐ and B‐band absorption of F_nZnPc thin films with n = 0, 4, 8, whereas for F₁₆ZnPc a different absorption pattern is detected. A correlation between structure and electronic transport is deduced. For F₄ZnPc/C₆₀ cells, the enhanced long range order supports fill factors of 55% and an increase of the short circuit current density by 18%, compared to ZnPc/C₆₀. As a parameter being sensitive to the organic/organic interface energetics, the open circuit voltage is analyzed. An enhancement of this quantity by 27% and 50% is detected for F₄ZnPc‐ and F₈ZnPc‐based devices, respectively, and is attributed to an increase of the quasi‐Fermi level splitting at the donor/acceptor interface. In contrast, for F₁₆ZnPc/C₆₀ a decrease of the open circuit voltage is observed. Complementary photoelectron spectroscopy, external quantum efficiency, and photoluminescence measurements reveal a different working principle, which is ascribed to the particular energy level alignment at the interface of the photoactive materials.     

Self‐Assembly of Nanoparticle‐Spiked Pillar Arrays for Plasmonic Biosensing

Plasmonic biosensors have demonstrated superior performance in detecting various biomolecules with high sensitivity through simple assays. Scaled‐up, reproducible chip production with a high density of hotspots in a large area has been technically challenging, limiting the commercialization and clinical translation of these biosensors. A new fabrication method for 3D plasmonic nanostructures with a high density, large volume of hotspots and therefore inherently improved detection capabilities is developed. Specifically, Au nanoparticle‐spiked Au nanopillar arrays are prepared by utilizing enhanced surface diffusion of adsorbed Au atoms on a slippery Au nanopillar arrays through a simple vacuum process. This process enables the direct formation of a high density of spherical Au nanoparticles on the 1 nm‐thick dielectric coated Au nanopillar arrays without high‐temperature annealing, which results in multiple plasmonic coupling, and thereby large effective volume of hotspots in 3D spaces. The plasmonic nanostructures show signal enhancements over 8.3 × 10⁸‐fold for surface‐enhanced Raman spectroscopy and over 2.7 × 10²‐fold for plasmon‐enhanced fluorescence. The 3D plasmonic chip is used to detect avian influenza‐associated antibodies at 100 times higher sensitivity compared with unstructured Au substrates for plasmon‐enhanced fluorescence detection. Such a simple and scalable fabrication of highly sensitive 3D plasmonic nanostructures provides new opportunities to broaden plasmon‐enhanced sensing applications.     

Efficiency of Light Outcoupling Structures in Organic Light‐Emitting Diodes: 2D TiO2 Array as a Model System

Organic light‐emitting diodes (OLEDs) are widely used in research and are established in the industry. The building block nature of organic compounds enables a vast variety of materials. On top of that, there exist many strategies to improve the light outcoupling of OLEDs making a direct comparison of outcoupling technologies difficult. Here, a novel approach is introduced for the evaluation of light outcoupling structures. The new defined “efficiency of light outcoupling structures” (ELOS) clearly determines the effectiveness of the light outcoupling structure by weighting the experimental efficiency enhancement over the theoretical outcoupling gain. It neither depends on cavity design nor on the chosen organic material. The methodology is illustrated for red phosphorescent OLEDs comprising internal and external light outcoupling structures. Assumptions and further uses are discussed with respect to experimental and theoretical handling. In addition, the ELOS is calculated for various outcoupling techniques from literature to demonstrate the universality. Finally, most suitable reference OLEDs are discussed for application of light outcoupling structures. The presented approach enables new possibilities for studying light outcoupling structures and improves their comparability in a highly material‐driven research field.     

Comparison of thin epitaxial film silicon photovoltaics fabricated on monocrystalline and polycrystalline seed layers on glass

We fabricate thin epitaxial crystal silicon solar cells on display glass and fused silica substrates overcoated with a silicon seed layer. To confirm the quality of hot‐wire chemical vapor deposition epitaxy, we grow a 2‐µm‐thick absorber on a (100) monocrystalline Si layer transfer seed on display glass and achieve 6.5% efficiency with an open circuit voltage (V_OC) of 586 mV without light‐trapping features. This device enables the evaluation of seed layers on display glass. Using polycrystalline seeds formed from amorphous silicon by laser‐induced mixed phase solidification (MPS) and electron beam crystallization, we demonstrate 2.9%, 476 mV (MPS) and 4.1%, 551 mV (electron beam crystallization) solar cells. Grain boundaries likely limit the solar cell grown on the MPS seed layer, and we establish an upper bound for the grain boundary recombination velocity (S_GB) of 1.6x10⁴ cm/s. Copyright © 2014 John Wiley & Sons, Ltd.     

Physical Layer Development Framework for OsmocomBB

The open source GSM protocol stack of the OsmocomBB project offers a versatile development environment regarding the data link and network layer. There is no solution available for developing physical layer baseband algorithms in combination with the data link and network layer. In this paper, a baseband development framework architecture with a suitable interface to the protocol stack of OsmocomBB is presented. With the proposed framework, a complete GSM protocol stack can be run and baseband algorithms can be evaluated in a closed system. It closes the gap between physical layer signal processing implementations in Matlab and the upper layers of the OsmocomBB GSM protocol stack. An embedded version of the system has been realized with FPGA and PowerPC to enable real-time operation. The functionality of the system has been verified with a testbed comprising an OpenBTS base-station emulator, a receiver board with RF transceiver and our developed physical layer signal processing system.     

Outage analysis of selection diversity over Rayleigh fading channels with multiple co-channel interferers

In this paper an approach to the performance analysis of signal-to-interference (SIR) based selection combining (SC) operating over the Rayleigh fading channels experiencing an arbitrary number of multiple, Rayleigh co-channel interferers is presented. We have presented a general analysis of multibranch SC where each branch experiences an arbitrary number of multiple equal power co-channel interferers. Useful closed form expressions are derived for the probability density function (PDF) and cumulative distribution function (CDF) at the output of the combiner. Also an outage analysis is performed in order to show the effects of the number of multiple interferers, diversity order and input SIR unbalance to the system performances.     

Carbon‐Based Anodes for Lithium Sulfur Full Cells with High Cycle Stability

The lithium sulfur battery system has been studied since the late 1970s and has seen renewed interest in recent years. However, even after three decades of intensive research, prolonged cycling can only be achieved when a large excess of electrolyte and lithium is used. Here, for the first time, a balanced and stable lithium sulfur full cell is demonstrated with silicon–carbon as well as all‐carbon anodes. More than 1000 cycles, a specific capacity up to 1470 mAh g^?1 _sulfur (720 mAh g^?1 _cathode), and a high coulombic efficiency of over 99% even with a low amount of electrolyte are achieved. The alternative anodes do not suffer from electrolyte depletion, which is found to be the main cause of cell failure when using metallic lithium anodes.     

A Direct Approach to Organic/Inorganic Semiconductor Hybrid Particles via Functionalized Polyfluorene Ligands

Controlled Suzuki–Miyaura coupling polymerization of 7′‐bromo‐9′,9′‐dioctyl‐fluoren‐2′‐yl‐4,4,5,5‐tetramethyl‐[1,3,2]dioxaborolane initiated by bromo(4‐tert‐butoxycarbonylamino‐phenyl)(tri‐tert‐butylphosphine)palladium ( 1 ) or bromo(4‐diethoxyphosphoryl‐phenyl)(tri‐tert‐butylphosphine)palladium ( 2 ) yields functionalized polyfluorenes (M_n = 4 × 10³ g mol^?1, M_w/M_n < 1.2) with a single amine or phosphonic acid, respectively, end‐group. High temperature synthesis of cadmium selenide quantum dots with these functionalized polyfluorenes as stabilizing ligands yields hybrid particles consisting of good quality (e.g. emission full width at half maximum of 30 nm; size distribution σ < 10%) inorganic nanocrystals with polyfluorene attached to the surface, as corroborated by transmission electron microscopy analysis and analytical ultracentrifugation. Sedimentation studies on particle dispersions show that a substantial portion (ca. half) of the phosphonic acid terminated polyfluorene ligands is bound to the inorganic nanocrystals, versus ca. 5% for the amino‐functionalized polyfluorene ligands. Single particle micro‐photoluminescence spectroscopy shows an efficient and complete energy transfer from the polyfluorene layer to the inorganic quantum dot.     

Mechanism of Crystallization and Implications for Charge Transport in Poly(3‐ethylhexylthiophene) Thin Films

In this work, crystallization kinetics and aggregate growth of poly(3‐ethylhexylthiophene) (P3EHT) thin films are studied as a function of film thickness. X‐ray diffraction and optical absorption show that individual aggregates and crystallites grow anisotropically and mostly along only two packing directions: the alkyl stacking and the polymer chain backbone direction. Further, it is also determined that crystallization kinetics is limited by the reorganization of polymer chains and depends strongly on the film thickness and average molecular weight. Time‐dependent, field‐effect hole mobilities in thin films reveal a percolation threshold for both low and high molecular weight P3EHT. Structural analysis reveals that charge percolation requires bridged aggregates separated by a distance of ≈2–3 nm, which is on the order of the polymer persistence length. These results thus highlight the importance of tie molecules and inter‐aggregate distance in supporting charge percolation in semiconducting polymer thin films. The study as a whole also demonstrates that P3EHT is an ideal model system for polythiophenes and should prove to be useful for future investigations into crystallization kinetics.     

High Precision,Electrochemical Detection of Reversible Binding of Recombinant Proteins on Wide Bandgap GaN Electrodes Functionalized with Biomembrane Models

We report a novel hybrid charge sensor realized by the deposition of phospholipid monolayers on highly doped n‐GaN electrodes. To detect the binding of recombinant proteins with histidine‐tags, lipid vesicles containing chelator lipids were deposited on GaN electrodes pre‐coated with octadecyltrimethoxysilane monolayers. Owing to its optical transparency, GaN allows the confirmation of the fluidity of supported membranes by fluorescence recovery after photo‐bleaching (FRAP). The electrolyte‐(organic) insulator‐semiconductor (EIS) setup enables one to transduce variations in the surface charge density ΔQ into a change in the interface capacitance ΔC _p and, thus, the flat‐band potential ΔU _FB. The obtained results demonstrate that the membrane‐based charge sensor can reach a high sensitivity to detect reversible changes in the surface charge density on the membranes by the formation of chelator complexes, docking of eGFP with histidine tags, and cancellation by EDTA. The achievable resolution of ΔQ ≥ 0.1 μC/cm² is better than that obtained for membrane‐functionalized p‐GaAs, 0.9 μC/cm², and for ITO coated with a polymer supported lipid monolayer, 2.2 μC/cm². Moreover, we examined the potential application of optically active InGaN/GaN quantum dot structures, for the detection of changes in the surface potential from the photoluminescence signals measured at room temperature.