Accuracy of continuous ice-core trace-element analysis by inductively coupled plasma sector field mass spectrometry

Trace elements trapped in glaciers are important indicators for the characterization of past biogeochemical cycles, the identification of numerous sources and their varying strength, and thus indirectly provide insight into past climate variations. However, this necessitates highly resolved and continuous records of trace elements in ice. To obtain records corresponding to these requirements, a continuous ice-core melting (CIM) device was coupled to an inductively coupled plasma sector field mass spectrometer (ICP-SFMS). Accuracy of this newly developed method was tested by replicate analysis of longitudinally cut ice-core sections (reproducibility) and by comparing results of the continuous method with the conventional decontamination and analysis procedure. The new, fast method is suited to accurately determine concentrations of a number of elements, such as Li, Na, Mg, Ca, Mn, Co, Br, Sr, Mo, and Tl. However, for 18 elements (including Al and lanthanides) observed concentrations were underestimated when analyzed using the continuous method. Possible explanations of these low concentrations are (i) incomplete dissolution of mineral dust particles contained in the ice resulting from a delayed acidification step and/or (ii) adsorption of dissolved trace elements or mineral dust particles on the surface of the ice melting device.     

Detection of the gasoline components methyl tert-butyl ether,benzene, toluene,and m-xylene using ion mobility spectrometers with a radioactive and UV ionization source

For the first time, ion mobility spectrometers (IMS) with radioactive and UV ionization sources in combination with multicapillary columns (MCCs) have been used to determine methyl tert-butyl ether (MTBE), a gasoline additive, in water and nitrogen as well as the monoaromatic compounds benzene, toluene, and m-xylene (BTX). A membrane extraction unit was set up to extract the substances from water, which is simple, effective, and easy to automate for further applications. Thus, the detection of MTBE and BTX of gasoline vapors was accomplished after a preliminary silicone membrane extraction. Two-dimensional data analyses of IMS-chromatograms allow us to separate these substances clearly according to their different retention and drift times. Method detection limits for MTBE were 2 microg/L (UV) and 30 pg/L (63Ni) in nitrogen and 20 mg/L (UV) and 1 microg/L (63Ni) in water. Rather a good reproducibility was achieved with relative standard deviations of between 2.9 and 9%. The method presented in this article has been proven to be suitable for nearly real-time monitoring as the total analysis time is less than 90 s. As an example of application, the detection of MTBE and BTX in a mixture of volatile organic compounds of pure gasoline using the 2-D IMS-chromatogram is presented.     

Business owners' action planning and its relationship to business success in three African countries.

A model of business success was developed with motivational resources (locus of control, self-efficacy, achievement motivation, and self-reported personal initiative) and cognitive resources (cognitive ability and human capital) as independent variables, business owners' elaborate and proactive planning as a mediator, and business size and growth as dependent variables. Three studies with a total of 408 African micro and small-scale business owners were conducted in South Africa, Zimbabwe, and Namibia. Structural equation analyses partially supported the hypotheses on the importance of psychological planning by the business owners. Elaborate and proactive planning was substantially related to business size and to an external evaluation of business success and was a (partial) mediator for the relationship between cognitive resources and business success. The model carries important implications for selection, training, and coaching of business owners. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Volume Preservation of Multiresolution Meshes

Geometric constraints have proved to be efficient for enhancing the realism of shape animation. The present paper addresses the computation and the preservation of the volume enclosed by multiresolution meshes. A wavelet based representation allows the mesh to be handled at any level of resolution. The key contribution is the calculation of the volume as a trilinear form with respect to the multiresolution coefficients. Efficiency is reached thanks to the pre-processing of a sparse 3D data structure involving the transposition of the filters while represented as a lifting scheme. A versatile and interactive method for preserving the volume during a deformation process is then proposed. It is based on a quadratic minimization subject to a linearization of the volume constraint. A closed form of the solution is derived.     

A large deformation solid‐shell concept based on reduced integration with hourglass stabilization

In this paper a new eight‐node (brick) solid‐shell finite element formulation based on the concept of reduced integration with hourglass stabilization is presented. The work focuses on static problems. The starting point of the derivation is the three‐field variational functional upon which meanwhile established 3D enhanced strain concepts are based. Important additional assumptions are made to transfer the approach into a powerful solid‐shell. First of all, a Taylor expansion of the first Piola–Kirchhoff stress tensor with respect to the normal through the centre of the element is carried out. In this way the stress becomes a linear function of the shell surface co‐ordinates whereas the dependence on the thickness co‐ordinate remains non‐linear. Secondly, the Jacobian matrix is replaced by its value in the centre of the element. These two assumptions lead to a computationally efficient shell element which requires only two Gauss points in the thickness direction (and one Gauss point in the plane of the shell element). Additionally three internal element degrees‐of‐freedom have to be determined to avoid thickness locking. One important advantage of the element is the fact that a fully three‐dimensional stress state can be modelled without any modification of the constitutive law. The formulation has only displacement degrees‐of‐freedom and the geometry in the thickness direction is correctly displayed. Copyright © 2006 John Wiley & Sons, Ltd.     

Understanding life cycle social impacts in manufacturing: A processed-based approach

Developing sustainable products and processes is growing in importance due to increasing regulation, consumer interest, access to information, and competitive forces. In order to adequately evaluate the sustainability of products and processes, there is a need to consider the impacts from all three pillars of sustainability – society, environment, and economics. There are substantial challenges to identifying and understanding the social impacts associated with manufacturing activities. This paper provides a framework for characterizing the social impacts of manufacturing throughout the life cycle of a product or process. Social impacts occur on various scales in manufacturing, from the level of a unit process to the level of the enterprise. Additionally, manufacturing activities impact consumers, communities, and larger political/spatial realms. This paper identifies key characteristics of social impacts associated with manufacturing that should be considered to more effectively address the social dimension of sustainability for products and processes. Examples involving a typical manufacturing process – welding – are presented to illustrate the utility of the framework.     

Three-dimensional human shape inference from silhouettes: reconstruction and validation

Silhouettes are robust image features that provide considerable evidence about the three-dimensional (3D) shape of a human body. The information they provide is, however, incomplete and prior knowledge has to be integrated to reconstruction algorithms in order to obtain realistic body models. This paper presents a method that integrates both geometric and statistical priors to reconstruct the shape of a subject assuming a standardized posture from a frontal and a lateral silhouette. The method is comprised of three successive steps. First, a non-linear function that connects the silhouette appearances and the body shapes is learnt and used to create a first approximation. Then, the body shape is deformed globally along the principal directions of the population (obtained by performing principal component analysis over 359 subjects) to follow the contours of the silhouettes. Finally, the body shape is deformed locally to ensure it fits the input silhouettes as well as possible. Experimental results showed a mean absolute 3D error of 8 mm with ideal silhouettes extraction. Furthermore, experiments on body measurements (circumferences or distances between two points on the body) resulted in a mean error of 11 mm.     

In vitro β‐Carotene Bioaccessibility and Lipid Digestion in Emulsions: Influence of Pectin Type and Degree of Methyl‐Esterification

Citrus pectin (CP) and sugar beet pectin (SBP) were demethoxylated and fully characterized in terms of pectin properties in order to investigate the influence of the pectin degree of methyl‐esterification (DM) and the pectin type on the in vitro β‐carotene bioaccessibility and lipid digestion in emulsions. For the CP based emulsions containing β‐carotene enriched oil, water and pectin, the β‐carotene bioaccessibility, and lipid digestion were higher in the emulsions with pectin with a higher DM (57%; “CP57 emulsion”) compared to the emulsions with pectin with a lower DM (30%; “CP30 emulsion”) showing that the DM plays an important role. In contrast, in SBP‐based emulsions, nor β‐carotene bioaccessibility nor lipid digestion were dependent on pectin DM. Probably here, other pectin properties are more important factors. It was observed that β‐carotene bioaccessibility and lipid digestion were lower in the CP30 emulsion in comparison with the CP57, SBP32, and SBP58 emulsions. However, the β‐carotene bioaccessibility of CP57 emulsion was similar to that of the SBP emulsions, whereas the lipid digestion was not. It seems that pectin type and pectin DM (in case of CP) are determining which components can be incorporated into micelles. Because carotenoids and lipids have different structures and polarities, their incorporation may be different. This knowledge can be used to engineer targeted (digestive) functionalities in food products. If both high β‐carotene bioaccessibility and high lipid digestion are targeted, SBP emulsions are the best options. The CP57 emulsion can be chosen if high β‐carotene bioaccessibility but lower lipid digestion is desired.     

Surface properties of wood and MDF after ultrasonic-assisted cutting

Surfaces created by ultrasonic-assisted cutting (UC) of beech and spruce and of medium density fibreboard (MDF) are compared to surfaces obtained by conventional linear cutting (CC) using a sharp tool. Topography is evaluated performing roughness measurements and scanning electron microscopy. No effect of UC procedure on mean roughness is found. The surface of MDF and large areas of the surfaces of the woods appear similar after UC and CC, whereas other regions show impact marks and microscopic reels produced by the periodic oscillation of the tool in UC. The wettability of surfaces produced with both wood processing techniques is similar. Surface free energy measurements indicate accelerated ageing caused by UC, probably due to heating.