Dual photonic-electrochemical lab on a chip for online simultaneous absorbance and amperometric measurements

A dual lab on a chip (DLOC) approach that enables simultaneous optical and electrochemical detection working in a continuous flow regime is presented. Both detection modes are integrated for the first time into a single detection volume and operate simultaneously with no evidence of cross-talk. The electrochemical cell was characterized amperometrically by measuring the current in ferrocyanide solutions at +0.4 V vs gold pseudoreference electrode, at a flow rate of 200 μL min(-1). The experimental results for ferrocyanide concentrations ranging from 0.005 to 2 mM were in good agreement with the values predicted by the Levich equation for a microelectrode inside a rectangular channel, with a sensitivity of 2.059 ± 0.004 μA mM(-1) and a limit of detection (LoD) of (2.303 ± 0.004) × 10(-3) mM. Besides, optical detection was evaluated by measuring the absorbance of ferricyanide solutions at 420 nm. The results obtained therein coincide with those predicted by the Beer-Lambert law for a range of ferricyanide concentrations from 0.005 to 0.3 mM and showed an estimated LoD of (0.553 ± 0.001) × 10(-3) mM. The DLOC was finally applied to the analysis of L-lactate via a bienzymatic reaction involving lactate oxidase (LOX) and horseradish peroxidase (HRP). Here, the consumption of the reagent of the reaction (ferrocyanide) was continuously monitored by amperometry whereas the product of the reaction (ferricyanide) was recorded by absorbance. The DLOC presented good performance in terms of sensitivity and limit of detection, comparable to other fluidic systems found in the literature. Additionally, the ability to simultaneously quantify enzymatic reagent consumption and product generation confers the DLOC a self-verifying capability which in turn enhances its robustness and reliability.     

Application of a Recombinant Escherichia coli Whole‐Cell Catalyst Expressing Hydroxynitrile Lyase and Nitrilase Activities in Ionic Liquids for the Production of (S)‐Mandelic Acid and (S)‐Mandeloamide

The conversion of benzaldehyde and cyanide into mandelic acid and mandeloamide by a recombinant Escherichia coli strain which simultaneously expressed an (S)‐hydroxynitrile lyase (oxynitrilase) from cassava (Manihot esculenta) and an arylacetonitrilase from Pseudomonas fluorescens EBC191 was studied. Benzaldehyde exhibited a pronounced inhibitory effect on the nitrilase activity in concentrations ≥25 mM. Therefore, it was tested if two‐phase systems consisting of a buffered aqueous phase and the ionic liquid 1‐butyl‐1‐pyrrolidinium bis(trifluoromethanesulfonyl)imide (BMpl NTf₂) or 1‐butyl‐3‐methylimidazolium hexafluorophosphate (BMim PF₆) could be used for the intended biotransformation. The distribution coefficients of the substrates, intermediates and products of the reaction were determined and it was found that BMpl NTf₂ and BMim PF₆ were highly efficient as substrate reservoirs for benzaldehyde. The recombinant E. coli strain was active in the presence of BMpl NTf₂ or BMim PF₆ phases and converted benzaldehyde and cyanide into mandelic acid and mandeloamide. The two‐phase systems allowed the conversion of benzaldehyde dissolved in the ionic liquids to a concentration of 700 mM with product yields (=sum of mandelic acid and mandeloamide) of 87–100%. The cells were slightly more effective in the presence of BMpl NTf₂ than in the presence of BMim PF₆. In both two‐phase systems benzaldehyde and cyanide were converted into (S)‐mandeloamide and (S)‐mandelic acid with enantiomeric excesses ≥94%. The recombinant E. coli cells formed, in the two‐phase systems with ionic liquids and increased substrate concentrations, higher relative amounts of mandeloamide than in a purely aqueous system with lower substrate concentrations.     

Spray‐Coated Silver Nanowires as Top Electrode Layer in Semitransparent P3HT:PCBM‐Based Organic Solar Cell Devices

Silver nanowire (Ag NW) thin films are investigated as top electrodes in semitransparent inverted organic solar cells. The performance of semitransparent poly(3‐hexylthiophene‐2,5‐diyl):[6,6]‐phenyl‐C61‐butyric acid methyl ester (P3HT:PCBM) organic solar cells with Ag NW top electrode layers is found to match very closely the performance of reference devices based on thermally evaporated, highly reflective metal silver top electrodes. The optical losses of the semitransparent electrodes are investigated in detail and analyzed in terms of transmission, scattering, and reflection losses. The impact on an external back reflector is shown to increase the light harvesting efficiency of optically thin devices. Further analysis of transparent devices under illumination from the indium tin oxide (ITO) backside and through the Ag NW front electrode open the possibility to gain deep insight into the vertical microstructure related devices performance. Overall, Ag NW top electrodes are established as a serious alternative to TCO based electrodes. Semitransparent devices with efficiencies of over η = 2.0% are realized.     

Volatile compounds of original African black and white shea butter from Tchad and Cameroon

Shea butter is used as an edible vegetable fat in many African countries. It can be utilized as a substitute or complete replacement for cocoa butter in various applications and plays an important role in traditional African medicinal practice. Although detection of volatile compounds by solid‐phase micro‐extraction gas‐chromatography mass‐spectroscopy (SPME‐GC‐MS) is a very reliable and reproducible technique, which can be used as an important part of authenticity checking, production monitoring and contamination detection, no published data about volatile compounds of shea butter are available so far. In this investigation, the characteristic volatiles in the headspace of original African shea butter samples were identified by using SPME‐capillary‐GC coupled to a mass selective detector. Almost 100 different volatile components were identified, e.g. fatty acids, saturated and unsaturated aldehydes and ketones, terpenes, and typical Maillard reaction products such as methylfuranes and pyrazines. Furthermore, the samples have been olfactorily evaluated by a panel of professional flavorists and trained analytical chemists. It can be stated that variations in processing conditions of shea butter result in considerable differences in the composition of headspace volatiles, detected by SPME‐GC‐MS and human olfaction.     

Pneumocandin Biosynthesis: Involvement of a trans‐Selective Proline Hydroxylase

Echinocandins are cyclic nonribosomal hexapeptides based mostly on nonproteinogenic amino acids and displaying strong antifungal activity. Despite previous studies on their biosynthesis by fungi, the origin of three amino acids, trans‐4‐ and trans‐3‐hydroxyproline, as well as trans‐3‐hydroxy‐4‐methylproline, is still unknown. Here we describe the identification, overexpression, and characterization of GloF, the first eukaryotic α‐ketoglutarate/Fe^II‐dependent proline hydroxylase from the pneumocandin biosynthesis cluster of the fungus Glarea lozoyensis ATCC 74030. In in vitro transformations with L ‐proline, GloF generates trans‐4‐ and trans‐3‐hydroxyproline simultaneously in a ratio of 8:1; the latter reaction was previously unknown for proline hydroxylase catalysis. trans‐4‐Methyl‐L ‐proline is converted into the corresponding trans‐3‐hydroxyproline. All three hydroxyprolines required for the biosynthesis of the echinocandins pneumocandins A₀ and B₀ in G. lozoyensis are thus provided by GloF. Sequence analyses revealed that GloF is not related to bacterial proline hydroxylases, and none of the putative proteins with high sequence similarity in the databases has been characterized so far.     

慕尼黑理工大学建筑博物馆

收藏慕尼黑理工大学建筑博物馆于1868年随着该大学一同建成。以前收集的大量建筑收藏品最初是作为教学资料,并可以在陈列室里供人查阅。第二次世界大战以后,不断地收购使这里成为了德国最大的建筑档案馆, 如今,这里有500位重要建筑师的近40万张图纸、近 10万幅摄影作品和800个模型。最早的图纸来自16世纪,最早的模型则出自1659年,藏品中的大部分是19 世纪和20世纪的德国建筑资料,是建筑摄影以及建筑发展文档编制的开端时期的资料。     

景观设计展望:国际性和中国特色

中国的当代景观设计仍然在传统的范例和国际的范例之间探寻其自己的风格。北京土人景观规划设计研究院所做的项目展示了当代的、同时又是自己的设计语言,彰显了全球化背景下当代中国人的身份。     

Ausbreitung von Kältefahnen im Grundwasser bei Erdwärmesonden

Shallow geothermal energy installations, especially ground source heat pump (GSHP) systems are increasingly being used for air conditioning and temperature control in buildings. Heating applications, for example, result in cold temperature anomalies (cold plumes) in the subsurface. To avoid interactions between adjacent cold plumes, authorities recommend minimum distances of about 10 m between installations. The length of these plumes can be simulated analytically and numerically. The presented analytical solutions are valid for steady-state conditions and consider conduction, convection and dispersion. The results show that the length depends on different parameters, especially flow velocity. The plumes in gravel aquifers become temporarily longer than in less permeable aquifers. Even under average energy extraction rates, they can exceed 10 m in length after one heating period. In the presented example the plume has a length of 10 m after 100 days under a continuous energy extraction rate of 55 W?m^?1. However, these plumes can regenerate quickly. Finally, the analytical results are discussed in a legal context.