CMOS-Compatible Room-Temperature Rectifier Toward Terahertz Radiation Detection

In this paper, we present a new rectifying device, compatible with the technology of CMOS image sensors, suitable for implementing a direct-conversion detector operating at room temperature for operation at up to terahertz frequencies. The rectifying device can be obtained by introducing some simple modifications of the charge-storage well in conventional CMOS integrated circuits, making the proposed solution easy to integrate with the existing imaging systems. The rectifying device is combined with the different elements of the detector, composed of a 3D high-performance antenna and a charge-storage well. In particular, its position just below the edge of the 3D antenna takes maximum advantage of the high electric field concentrated by the antenna itself. In addition, the proposed structure ensures the integrity of the charge-storage well of the detector. In the structure, it is not necessary to use very scaled and costly technological nodes, since the CMOS transistor only provides the necessary integrated readout electronics. On-wafer measurements of RF characteristics of the designed junction are reported and discussed. The overall performances of the entire detector in terms of noise equivalent power (NEP) are evaluated by combining low-frequency measurements of the rectifier with numerical simulations of the 3D antenna and the semiconductor structure at 1 THz, allowing prediction of the achievable NEP.     

A D2D-Based Solution for MTC Connectivity Problem in NOMA-Based Cellular IoT Networks: Dynamic User Grouping and Resource Allocation

Mobile Networks and Applications - In a cellular network (CN), cellular users (CUs) located nearby machine type communications (MTC) devices (MTC-Ds) may act as uplink gateways to relay data to the...     

Research advances in cognitive ultra wide band radio and their application to sensor networks

The paper illustrates the novel concept of Cognitive UWB Radio, a wireless system based on UWB transmission able to self-adapt to the characteristics of the surrounding environment. First, salient features of UWB transmission are reviewed, and then, application of UWB characteristics to the problem of cognitive radio systems is discussed. Current ongoing studies and achieved results on a possible physical layer based on Prolate Spheroidal Wave Functions and consistent with the Cognitive UWB Radio paradigm are presented and analyzed, and their application to the sensor network scenario is discussed.     

Impact of Fiber Non-linearity in High Capacity WDM Systems and in Cross-Connected Backbone Networks

The rapidly increasing data traffic volumes will demand for very high transmission capacity and network nodes throughput. Wavelength division multiplexing (WDM) technology will be asked to support many channels on the same fiber, both in point-to-point links and in WDM optical networks. The transmission of a high number of wavelength channels in all these systems is a key issue. This paper analyzes this topic, in both high capacity links and optical networks, highlighting the impact of fiber non-linearity, and addressing the main source of impairments. This is done through the use of a semi-analytical model recently upgraded to account for all the contributions deriving from Kerr effects, particularly four-wave mixing and cross-phase modulation. The analysis reveals that more than one hundred of channels at 2.5 Gbit/s can be transmitted in point-to-point links whose length can span until the order of 1000 km, and 32 channels per fiber, at the previous bit rate, can be handled in WDM networks, without dispersion compensation. For a higher number of channels (e.g., 64) dispersion compensation is needed.     

新型自振荡电源转换器VK05CFL

1.技术概述 VK05CFL是一种用于驱动微型荧光灯的自振荡转换器,采用意法半导体的VIPower M3-3专利技术制造而成,允许在同一芯片上集成控制部分和电源级。电源级是一个“发射器开关”,其构成是在级联配置内放置一个双极高压复合晶体管和一个低压MOSFET,因此,在高击穿电     

Improved transparency in energy-based bilateral telemanipulation

In bilateral telemanipulation algorithms based on enforcing time-domain passivity, internal friction in the devices poses an additional energy drain. This can severely decrease the obtainable transparency of these algorithms when high amounts of friction are present in the slave device. Based on a model of the friction, the dissipated energy can be estimated and reclaimed inside the energy balance of the control algorithm. Extending the energy balance which is monitored, decreases the net passivity of the telemanipulation system enforced by the control algorithm, which usually enforces passivity of just the bilateral controller. Experimental results are provided that demonstrate the effectiveness of the proposed approach in increasing the obtainable transparency. As long as the physically dissipated energy is underestimated, the telemanipulation system as a whole will remain passive. Thus the guaranteed stability property of the time-domain passivity algorithm is maintained.     

Soft‐Lithographed Up‐Converted Distributed Feedback Visible Lasers Based on CdSe–CdZnS–ZnS Quantum Dots

The development of a solution‐deposited up‐converted distributed feedback laser prototype is presented. It employs a sol–gel silica/germania soft‐lithographed microcavity and CdSe–CdZnS–ZnS quantum dot/sol–gel zirconia composites as optical gain material. Characterization of the linear and nonlinear optical properties of quantum dots establishes their high absorption cross‐sections in the one‐ and two‐ photon absorption regimes to be 1 × 10^?14 cm² and 5 × 10⁴ GM, respectively. In addition, ultrafast transient absorption dynamics measurements of the graded seal quantum dots reveal that the Auger recombination lifetime is 220 ps, a value two times higher than that of the corresponding CdSe core. These factors enable the use of such quantum dots as optically pumped gain media, operating in the one‐ and two‐photon absorption regime. The incorporation of CdSe–CdZnS–ZnS quantum dots within a zirconia host matrix affords a quantum‐dot ink that can be directly deposited on our soft‐lithographed distributed feedback grating to form an all‐solution‐processed microcavity laser.     

Self‐Assembly of Atomically Thin Chiral Copper Heterostructures Templated by Black Phosphorus

The fabrication of 2D systems for electronic devices is not straightforward, with top‐down low‐yield methods often employed leading to irregular nanostructures and lower quality devices. Here, a simple and reproducible method to trigger self‐assembly of arrays of high aspect‐ratio chiral copper heterostructures templated by the structural anisotropy in black phosphorus (BP) nanosheets is presented. Using quantitative atomic resolution aberration‐corrected scanning transmission electron microscopy imaging, in situ heating transmission electron microscopy and electron energy‐loss spectroscopy arrays of heterostructures forming at speeds exceeding 100 nm s^?1 and displaying long‐range order over micrometers are observed. The controlled instigation of the self‐assembly of the Cu heterostructures embedded in BP is achieved using conventional electron beam lithography combined with site specific placement of Cu nanoparticles. Density functional theory calculations are used to investigate the atomic structure and suggest a metallic nature of the Cu heterostructures grown in BP. The findings of this new hybrid material with unique dimensionality, chirality, and metallic nature and its triggered self‐assembly open new and exciting opportunities for next generation, self‐assembling devices.