Full quantum treatment of surface roughness effects in Silicon nanowire and double gate FETs

We review recent results on the effect of surface roughness on the transport properties of ultra-short devices like Silicon nanowire and double-gate FETs. We use a full quantum treatment within the non equilibrium Green’s function (NEGF) formalism which allows us to take into account quantum confinement, quantum phase interference, out-of-equilibrium, and quasi-ballistic transport and focus on transfer characteristics and low-field mobility.     

Linkages between manufacturing strategy, benchmarking, performance measurement and business process reengineering

An empirical analysis is presented for researching linkages between manufacturing strategy, benchmarking, performance measurement (PM) and business process reengineering (BPR). Although the importance of these linkages has been described in conceptual literature, it has not been widely demonstrated empirically. The survey research was carried out in 73 medium and large-sized Slovenian manufacturing companies within the mechanical, electro-mechanical and electronic industries. The resulting data were subjected to reliability and validity analyses. Canonical correlation analysis was used to test six hypotheses.The results confirmed the need for a strategically-driven BPR approach and the positive impact of performance measurement on BPR performance.     

Sensitivity analysis for reliable design verification of nuclear turbosets

In this paper, we present an application of sensitivity analysis for design verification of nuclear turbosets. Before the acquisition of a turbogenerator, energy power operators perform independent design assessment in order to assure safe operating conditions of the new machine in its environment. Variables of interest are related to the vibration behaviour of the machine: its eigenfrequencies and dynamic sensitivity to unbalance. In the framework of design verification, epistemic uncertainties are preponderant. This lack of knowledge is due to inexistent or imprecise information about the design as well as to interaction of the rotating machinery with supporting and sub-structures. Sensitivity analysis enables the analyst to rank sources of uncertainty with respect to their importance and, possibly, to screen out insignificant sources of uncertainty. Further studies, if necessary, can then focus on predominant parameters. In particular, the constructor can be asked for detailed information only about the most significant parameters.     

The sustainability of applied technologies for water supply in developing countries

This paper discusses the best use of technologies to assist people in critical living conditions. Developing countries with huge shortages of water, food, education, and services rely on external help for relief and possible paths to development. This paper considers the appropriate introduction and use of technologies in the water sector and provides examples to underline how their sustainability is crucial to achieving real development in a specified location.     

Energy-aware lazy scheduling algorithm for energy-harvesting sensor nodes

The main problem in dealing with energy-harvesting (EH) sensor nodes is represented by the scarcity and non-stationarity of powering, due to the nature of the renewable energy sources. In this work, the authors address the problem of task scheduling in processors located in sensor nodes powered by EH sources. Some interesting solutions have appeared in the literature in the recent past, as the lazy scheduling algorithm (LSA), which represents a performing mix of scheduling effectiveness and ease of implementation. With the aim of achieving a more efficient and conservative management of energy resources, a new improved LSA solution is here proposed. Indeed, the automatic ability of foreseeing at run-time the task energy starving (i.e. the impossibility of finalizing a task due to the lack of power) is integrated within the original LSA approach. Moreover, some modifications have been applied in order to reduce the LSA computational complexity and thus maximizing the amount of energy available for task execution. The resulting technique, namely energy-aware LSA, has then been tested in comparison with the original one, and a relevant performance improvement has been registered both in terms of number of executable tasks and in terms of required computational burden.     

Multi-hazard loss analysis of tall buildings under wind and seismic loads

This paper presents a framework for life-cycle loss estimation for non-structural damage in tall buildings under wind and seismic loads. Life-cycle cost analysis is a useful design tool for decision- makers, aimed at predicting monetary losses over the lifetime of a structure, accounting for uncertainties involved in the problem definition. For tall buildings, sensitive to dynamic excitations like earthquake and wind, it can be particularly suitable to base design decisions not only on initial cost and performance but also on future repair expenses. The proposed approach harmonises the procedures for intervention costs evaluation of structures subjected to multiple-hazards, taking into account the peculiar differences of wind and earthquake, in terms of load characterisation, type and evolution of damage. Relative effect of the two hazards on damage to drift- and acceleration-sensitive non-structural elements are examined. The influence of uncertainty in structural damping is also taken into account. It is shown that, although it is commonly believed that the design of a given structure is usually dominated by either winds or earthquakes, when LCC-based design is performed, both winds and earthquakes may be important.     

Soil Moisture Measurements: Comparison of Instrumentation Performances

It has long been recognized that reliable, robust, and automated instrumentation for the measurement of soil moisture content can be extremely useful, if not essential, in hydrological, environmental, and agricultural applications. A number of automated techniques for point measurement of soil water content have been developed to operational level over the past few decades. While each of those techniques has been individually calibrated by the gravimetric method, typically under laboratory conditions, there have been few studies that made a direct comparison between the various techniques, particularly under field conditions. This paper compares ECH2O probes, EC-5 (both sensors based on capacitance measurements, developed by Decagon Devices) and time domain reflectometer sensors (CS616 Campbell Scientific Water Content Reflectometer), with gravimetric data and with each other, under field conditions. Data were collected during two field experiments characterized by different soils and a wide range of soil moistures, resulting from irrigation/drying cycle. Results show that all the tested probes give acceptable results after being calibrated in the field. The capacitive sensors can be used in each type of soil with the same calibration equation, independently from depth, with root mean square error (RMSE) ranging between 2.5 and 3.6%. Time Domain Reflectometry probes showed a dependence on depth but a lower RMSE (1.6%).     

Design,estimation and experimental validation of optical Polarization Mode Dispersion Compensator in 40 Gbit/s NRZ and RZ optical systems

Polarization Mode Dispersion (PMD) compensation has been a matter of investigation of several papers in literature. The proposed solutions belong basically to two large families: electronic compensators and optical compensators. Both PMD compensator schemes have advantages and disadvantages: electronic PMD compensators are usually simple to include in line-terminal, potentially low-cost, very fast, and FEC compatible but their development is strongly dependent on IC technology capability that at this time allows device developments up to the 10 Gbit/s bit rates area. Furthermore, they are strongly dependent on modulation formats, and they can operate only on a single channel. Conversely, optical compensators are independent of bit rate and modulation format and potentially they can compensate more channels simultaneously; their major drawbacks are the longer response time and the complexity in the feedback signal process within the control algorithm. In this paper we consider an optical Polarization Mode Dispersion Compensator (PMDC) that is simple to realize and easy to include at limited costs in each EDFA module (distributed compensation) as well as a single-stage front-end compensator. Numerical analysis of the PMDC and experimental results confirm the utility of the PMDC proposed and its capability in compensating DGD larger than 20 ps in NRZ and RZ 40 Gbit/s optical systems.