Impact of spinel forming systems (Fe-/Mg-/Mn-Al-O) as functional coating materials for carbon-bonded alumina filters on steel melt filtration

Since solid, non-metallic inclusions influence considerably the quality of casted steel products, carbon-bonded alumina foam filters are used in secondary metallurgical treatments to remove these particles from steel melts. In order to attain a significant improvement of the filtration process, five different carbonaceous spinel compounds from the Fe-/Mg-/Mn-Al-O systems are applied on carbon-bonded alumina filters in this study and investigated with regard of their filtration efficiency. However, these spinel compounds decompose partially during sintering at 1400?°C under reducing atmosphere, wherefore the resulting coatings contain not only spinel compounds, but also oxidic and metallic components. The subsequent interaction with molten steel leads to the development of multicrystal structures on the filter surface, which stem from interfacial reactions between coating materials, molten steel, and inclusions. As a result of this procedure, a reduction of almost 60% alumina inclusions is measured with the aid of an automatic SEM, whereby spinel compounds from the Fe-Mn-Al-O system achieve highest filtration efficiencies.     

Schnelle lokale Raman‐Messung zur Untersuchung von Konzentrationsprofilen bei Mischvorgängen in Mikrokanälen

For the evaluation of mixing processes in microreactors, it is necessary to be able to investigate them in detail. For this purpose, a novel optical measuring system is presented, which allows the visualization of mixing and diffusion‐limited processes as well as concentration differences in fluid films. It consists of focusing optics with a microscope objective. In combination with a Raman spectrometer, various processes such as diffusion in the microreactor can be measured and investigated non‐invasively.     

Accelerated Visualization of Dynamic Molecular Surfaces

Molecular surfaces play an important role in studying the interactions between molecules. Visualizing the dynamic behavior of molecules is particularly interesting to gain insights into a molecular system. Only recently it has become possible to interactively visualize dynamic molecular surfaces using ray casting techniques. In this paper, we show how to further accelerate the construction and the rendering of the solvent excluded surface (SES) and the molecular skin surface (MSS). We propose several improvements to reduce the update times for displaying these molecular surfaces. First, we adopt a parallel approximate Voronoi diagram algorithm to compute the MSS. This accelerates the MSS computation by more than one order of magnitude on a single core. Second, we demonstrate that the contour‐buildup algorithm is ideally suited for computing the SES due to its inherently parallel structure. For both parallel algorithms, we observe good scalability up to 8 cores and, thus, obtain interactive frame rates for molecular dynamics trajectories of up to twenty thousand atoms for the SES and up to a few thousand atoms for the MSS. Third, we reduce the rendering time for the SES using tight‐fitting bounding quadrangles as rasterization primitives. These primitives also accelerate the rendering of the MSS. With these improvements, the interactive visualization of the MSS of dynamic trajectories of a few thousand atoms becomes for the first time possible. Nevertheless, the SES remains a few times faster than the MSS.     

Visuelle Analyse medizinischer Daten

In der Medizin werden gro?e Mengen an Daten generiert, die sich auf diagnostische Prozeduren, Behandlungsentscheidungen und Ergebnisse der Behandlung beziehen. Medizinische Bilddaten, z. B. Computertomografie (CT) und Kernspintomografiedaten (MRT), werden h?ufig akquiriert. Diese Daten müssen effizient analysiert werden, um klinische Entscheidungen ad?quat zu unterstützen. Insbesondere müssen Bildanalysetechniken, wie die Segmentierung und Quantifizierung anatomischer Strukturen und die visuelle Exploration der Daten, integriert werden. Neben den Anforderungen der individuellen Behandlung ergeben sich weitere Herausforderungen für die Datenauswertung aus den Bedürfnissen der klinischen Forschung, der ?ffentlichen Gesundheitsvorsorge und der Epidemiologie. Die Rolle des Benutzers ist hier die eines Forschers, der Daten untersucht und dabei z. B. potenzielle Korrelationen zwischen Risikofaktoren und der Entstehung von Erkrankungen analysiert. Die visuelle Exploration, bei der oft mehrere koordinierte Ansichten genutzt werden, und statistische Analysen müssen dazu geeignet integriert werden. Oft sind dabei die r?umliche (geografische) Verteilung der Patienten und die zeitliche Entwicklung von Erkrankungsf?llen wesentlich. Daher müssen die medizinischen Daten in ihrem r?umlichen und zeitlichen Bezug repr?sentiert werden, sodass eine enge Verbindung zwischen geografischen Informationssystemen und der Datenvisualisierung entsteht.     

A hierarchical approach to simulate the packing density of particle mixtures on a computer

In many fields of materials science it is important to know how densely a particle mixture can be packed. The “packing density” is the ratio of the particle volume and the volume of the surrounding container needed for a random close packing of the particles. We present a method for estimating the packing density for spherical particles based on computer simulations only, i.e. without the need for additional experiments. Our method is particularly suited for particle mixtures with an extremely wide range of particle diameters as they occur e.g. in modern concrete mixtures. A single representative sample from such mixtures would be much larger than can be handled on present standard computers. In our hierarchical approach the diameter range is therefore divided into smaller intervals. Samples from these limited diameter intervals are drawn and their packing density is estimated from a simulated packing. The results are used to “fill” the interstices in the sample from the next larger particle interval. To account for the interaction between particles of different sizes we include larger particles into the sample of smaller ones. The larger ones act as part of the boundary during the packing. Thus we obtain more realistic estimates of how dense a fraction of particles can be packed within the whole mixture. The focus of this paper is on the divide-and-conquer approach and on how the simulation results from the fractions can be collected into an overall estimate of the packing density. We do not go into details of the simulation technique for the single packing. We compare our results to some experimental data to show that our method works at least as good as the classical analytical models like CPM without the need for any experiments.     

Metrological traceability chain for pH measurement results

The extent to which technical barriers to international trade caused by non-acceptance of chemical measurement results can be removed, largely depends on the success in building up national and international traceability structures also in metrology in chemistry. Achieving metrological comparability of measurement results requires the definition of metrological calibration hierarchies providing metrological traceability chains which enable the establishment of metrological traceability of measured quantity values to a common metrological reference [1]. For pH, over the last decade, work has been carried out in a number of countries to build up meteorological calibration hierarchies within a national framework. An overview on the metrological traceability chain for pH is given with focus on the primary measurement procedure of pH.     

Logical Equivalence for Subtyping Object and Recursive Types

Subtyping in first order object calculi is studied with respect to the logical semantics obtained by identifying terms that satisfy the same set of predicates, as formalised through an assignment system. It is shown that equality in the full first order ς-calculus is modelled by this notion, which in turn is included in a Morris-style contextual equivalence. U. de’Liguoro’s research was partially supported by project PRIN’05 prot. 2005015785_003.     

Outcome of moderate carotid artery stenosis in patients who are asymptomatic

PURPOSE: The incidence rate of disease progression and stroke after the diagnosis of a moderate (50% to 79%) carotid stenosis was determined by means of color-flow duplex scanning. METHODS: During a 4-year period, 344 male veterans with moderate internal carotid artery stenoses, on one or both sides, were examined at regular intervals for a mean period of 25 months. Carotid color-flow scans were obtained semiannually. Clinical follow-up was performed to determine the incidence rate of amaurosis fugax, transient ischemic attacks, nonhemispheric symptoms, and strokes. RESULTS: New neurologic symptoms developed in 75 patients (21.8%). Fifty-one (14.8%) had ipsilateral symptoms during follow-up: 18 amaurosis fugax (5.2%), 14 transient ischemic attacks (4%), 5 nonhemispheric symptoms (1.4%), and 14 strokes (4%). Twenty-four patients (6.9%) had contralateral symptoms: 20 strokes (5.8%) and 4 transient ischemic attacks (1.2%). Life-table analysis showed that the annual rate of ipsilateral neurologic events was 8.1%, and the annual rate of stroke was 2.1%. Seventy-five patients (22%) died in the follow-up period. Disease progression to 80% to 99% stenosis or occlusion occurred in 71 of 458 vessels (15.5%). The internal carotid arteries that showed evidence of disease progression had a significantly higher initial peak systolic velocity (251 vs 190 cm/s; P <.0001) and end diastolic velocity (74 vs 52 cm/s; P < 0.0001). Black patients and patients with ischemic heart disease were at a higher risk for disease progression. We could not identify any atherosclerotic risk factors that reliably predicted patients in whom future ipsilateral neurologic symptoms were more likely to develop. However, there was an increased risk of stroke associated with progression of disease. CONCLUSION: Patients who are asymptomatic and who have moderate carotid stenoses are at significant risk for neurologic symptoms and death, but have a relatively low incidence rate of ipsilateral events. The initial flow characteristics in the stenotic vessel are predictive of future disease progression, but they are not helpful in identifying patients in whom symptoms will develop.     

Evaluation of basidiomycetous fungi for pretreatment of contaminated soil

BACKGROUND: For most dioxin‐contaminated sawmill soils, combustion is recommended. However, the process may be inefficient if the soil has a high organic matter content. The use of saprotrophic basidiomycetous fungi is an alternative for pretreatment of this kind of soil. A total of 147 fungi were evaluated for their ability to grow in sawmill soil. From this screening, the best soil colonizing fungi were selected to study their enzyme activities and degradation of soil organic matter. Pine (Pinus sylvestris) bark was used as a co‐substrate to propagate the fungi into the soil. The activities of manganese peroxidase (MnP), laccase, endo‐1,4‐β‐glucanase, endo‐1,4‐β‐xylanase, and endo‐1,4‐β‐mannanase were analysed from the inocula and fungal treated soil. RESULTS: The screening revealed that 56 out of 147 fungi were able to grow in non‐sterile soil, and most of them were litter‐decomposing fungi (LDF). In pine bark cultures, the highest enzyme activities were observed with Phanerochaete velutina, which produced 5 U g^?1 of MnP. The activity of endo‐1,4‐β‐glucanase was generally higher than that of other hydrolytic enzymes. The highest carbon loss from soil with a high organic matter content was achieved by P. velutina (3.4%) and Stropharia rugosoannulata (2.4%). CONCLUSIONS: Many LDF, and in addition the white‐rot fungus P. velutina, are potential degraders of soil organic matter since they showed good growth and respiratory activity. Pine bark was a suitable lignocellulosic co‐substrate and a good promoter of MnP activity. Copyright © 2009 Society of Chemical Industry