HIAWSC： An Immune Algorithm Based Heuristic Web Service Composition Framework

The introduction of of web services has led to web service composition being a focus of many researchers. Composing web services using workflows is seen as the most realistic method from an industrial viewpoint. Amongst other method, the use of natural computing methods has been proposed previously to automate web service composition. The need for a fast response when computing the most suitable sequence of services is addressed in this paper. In particular, we propose a novel heuristic immune algorithm with an efficient encoding and mutation method. The algorithm involves two steps： an immune selection operation, which is maintaining antibody population diversity and the clonal selection. The use of a vaccine during the evolution provides heuristic information that accelerates the convergence. Our experimental results illustrate that the proposed heuristic immune algorithm is very effective in improving the convergence speed. We also provide a schema analysis for this method.     

Electrolyte‐Gated n‐Type Transistors Produced from Aqueous Inks of WS2 Nanosheets

Solution‐processed, low cost thin films of layered semiconductors such as transition metal dichalcogenides (TMDs) are potential candidates for future printed electronics. Here, n‐type electrolyte‐gated transistors (EGTs) based on porous WS₂ nanosheet networks as the semiconductor are demonstrated. The WS₂ nanosheets are liquid phase exfoliated to form aqueous/surfactant stabilized inks, and deposited at low temperatures (T < 120 °C) in ambient atmosphere by airbrushing. No solvent exchange, further additives, or complicated processing steps are required. While the EGTs are primarily n‐type (electron accumulation), some hole transport is also observable. The EGTs show current modulations > 10⁴ with low hysteresis, channel width‐normalized on‐conductances of up to 0.27 µS µm^?1 and estimated electron mobilities around 0.01 cm² V^?1 s^?1. In addition, the WS₂ nanosheet networks exhibit relatively high volumetric capacitance values of 30 F cm^?3. Charge transport within the network depends significantly on the applied lateral electric field and is thermally activated, which supports the notion that hopping between nanosheets is a major limiting factor for these networks and their future application.     

Compact Modules for Wireless Communication Systems in the E-Band (71–76 GHz)

The millimeter-wave spectrum above 70 GHz provides a cost-effective solution to increase the wireless communications data rates by increasing the carrier wave frequencies. We report on the development of two key components of a wireless transmission system, a high-speed photodiode (HS-PD) and a Schottky Barrier Diode (SBD). Both components operate uncooled, a key issue in the development of compact modules. On the transmitter side, an improved design of the HS-PD allows it to deliver an output RF power exceeding 0 dBm (1 mW). On the receiver side, we present the design process and achieved results on the development of a compact direct envelope detection receiver based on a quasi-optical SDB module. Different resonant (meander dipole) and broadband (Log-Spiral and Log-Periodic) planar antenna solutions are designed, matching the antenna and Schottky diode impedances at high frequency. Impedance matching at baseband is also provided by means of an impedance transition to a 50 Ohm output. From this comparison, we demonstrate the excellent performance of the broadband antennas over the entire E-band by setting up a short-range wireless link transmitting a 1 Gbps data signal.     

Morphology Transformation Pathway of Block Copolymer-Directed Cooperative Self-Assembly of ZnO Hybrid Films Monitored In Situ during Slot-Die Coating

Cooperative self-assembly (co-assembly) of diblock copolymers (DBCs) and inorganic precursors that takes inspiration from the rich phase separation behavior of DBCs can enable the realization of a broad spectrum of functional nanostructures with the desired sizes. In a DBC assisted sol–gel chemistry approach with polystyrene-block-poly(ethylene oxide) and ZnO, hybrid films are formed with slot-die coating. Pure DBC films are printed as control. In situ grazing-incidence small-angle X-ray scattering measurements are performed to investigate the self-assembly and co-assembly process during the film formation. Combining complementary ex situ characterizations, several distinct regimes are differentiated to describe the morphological transformations from the initially solvent-dispersed to the ultimately solidified films. The comparison of the assembly pathway evidences that the key step in the establishment of the pure DBC film is the coalescence of spherical micelles toward cylindrical domains. Due to the presence of the phase-selective precursor, the formation of cylindrical aggregates in the solution is crucial for the structural development of the hybrid film. The pre-existing cylinders in the ink impede the domain growth of the hybrid film during the subsequent drying process. The precursor reduces the degree of order, prevents crystallization of the PEO block, and introduces additional length scales in the hybrid films.     

Chemical vapor deposition synthesis of self-aligned carbon nanotube arrays

A procedure for producing arrays of self-aligned carbon nanotubes (CNTs) using standard chemical vapor deposition (CVD) is reported. Using UV photolithography, silicon substrates are patterned with a thin layer of thermally evaporated iron as a CNT catalyst. The CVD synthesis was carried out over a small temperature range (700°C–800°C) using acetylene and methane gasses, producing aligned CNT towers. Scanning electron microscopy (SEM) analysis shows a relationship between CNT tower height and synthesis time. Additionally, results show that impurity particles dramatically effect CNT tower growth. These results indicate that aligned CNTs can be produced in a desired pattern with height control.     

An investigation on hydride VPE growth and properties of semi-insulating InP:Fe

Growth of highly resistive semi-insulating InP : Fe has been achieved by the Hydride VPE technique in an ambient consisting mostly of nitrogen. After dealing with some thermodynamic considerations pertinent to InP:Fe growth, the experimental growth parameters are described. It is shown that various amounts of iron can be introduced into the InP crystal just by varying the temperature of the iron source. The crystal quality of the grown material is estimated to be good by etch pit density and x-ray diffraction analyses. Current-voltage behaviour and capacitance studies on ann ⁺-SI-n ⁺ structure are explained by invoking the theory of current injection in solids by Lampert and Mark: the experimental current densities at the threshold of each observed regime are compared with the theoretically derived current densities; in the absence of current injection, the measured capacitance is found to be the same as the geometrical capacitance.     

<Emphasis Type="Italic">μ</Emphasis>DTNSec: a security layer with lightweight certificates for Disruption-Tolerant Networks on microcontrollers

In Delay/Disruption-Tolerant Networks, man-in-the-middle attacks are easy: due to the store-carry-forward principle, an attacker can simply place itself on the route between source and destination to eavesdrop or alter bundles. This weakness is aggravated in networks, where devices are energy-constrained but the attacker is not. To protect against these attacks, we design and implement μDTNSec, a security layer for Delay/Disruption-Tolerant Networks on microcontrollers. Our design establishes a public key infrastructure with lightweight certificates as an extension to the Bundle Protocol. It has been fully implemented as an addition to μDTN on Contiki OS and uses elliptic curve cryptography and hardware-backed symmetric encryption. In this enhanced version of μDTNSec, public key identity bindings are validated by exchanging certificates using neighbor discovery. μDTNSec provides a signature mode for authenticity and a sign-then-encrypt mode for added confidentiality. Our performance evaluation shows that the choice of the curve dominates the influence of the payload size. We also provide energy measurements for all operations to show the feasibility of our security layer on energy-constrained devices. Because a high quality source of randomness is required, we evaluated the random number generators by the AT86RF231 radio, its successor AT86RF233, and one based on the noise of the A/D converter. We found that only AT86RF233 provides the required quality.     

Performance of PKI-based security mechanisms in mobile ad hoc networks

Security for ad hoc network environments has received a lot of attention as of today. Previous work has mainly been focussing on secure routing, fairness issues, and malicious node detection. However, the issue of introducing and conserving trust relationships has received considerably less attention. In this article, we present a scalable method for the use of public key certificates and their revocation in mobile ad hoc networks (MANETs). With the LKN-ad hoc security framework (LKN-ASF) a certificate management protocol has been introduced, bringing PKI technology to MANETs. In addition a performance analysis of two different revocation approaches for MANETs will be presented.     

Antenna Array Designs for OFDM WLAN Indoor Transmission

Wireless local area networks (WLAN??s) based on the 802.11 standards are ubiquitous. However, the popularity of WLAN??s has made interference between WLAN users an issue. Spatial division multiple access (SDMA) is one way to orthogonalize these users and reduce interference. The contribution of this paper is to use real antenna array prototypes to determine the best array design for implementing indoor SDMA. Two SDMA antenna array prototypes are constructed and used to collect propagation measurements in an indoor environment. The propagation data is then incorporated into an SDMA orthogonal frequency division multiplexing (OFDM) analysis. This approach is able to very accurately predict how the two array designs will influence SDMA-OFDM performance in the indoor environment where the measurements are collected. The results indicate that the compact sectorized antenna array prototype performs better than the linear array prototype for in-room communication and that the reverse is true for inter-room communication.