Ion-exchange membranes made of semi-interpenetrating polymer networks,used for pervaporation-assisted esterification and ion transport

Ionic membranes were prepared by blending poly(vinyl alcohol) (PVA) with an ionic polymer. Semi-interpenetrating polymer networks (sIPN) in which the crosslinked PVA chains trap the ionic polymer were obtained by using a heat treatment at 180 °C or dibromoethane vapor at 140 °C, respectively, for poly (styrene sulfonic acid) (PSSH), poly (sodium styrene sulfonate) (PSSNa), poly (acrylic acid) (PAA) or poly (dimethyl dimethylene piperidinum chloride) (PDMeDMPCl) as the ionic polymer. The stability of the sIPN membranes in some liquid media was studied to select the appropriate membranes for the envisaged applications. The thermally crosslinked PVA/PSSH membranes showed an effective catalytic effect on the esterification reaction between n-propanol and propanoic acid. An active composite membrane made of a layer of PVA/PSSH deposited on a dense PVA layer of an industrial dehydration membrane exhibited both high catalytic activity and high selectivity to water in the pervaporation-assisted esterification. The values of the counter-ion transport number indicated that some crosslinked ionic membranes have good ion permselectivity.     

Cytoskeleton and cell cycle control during meiotic maturation of the mouse oocyte: integrating time and space

During meiotic maturation of mammalian oocytes, two successive divisions occur without an intermediate phase of DNA replication, so that haploid gametes are produced. Moreover, these two divisions are asymmetric, to ensure that most of the maternal stores are retained within the oocyte. This leads to the formation of daughter cells with different sizes: the large oocyte and the small polar bodies. All these events are dependent upon the dynamic changes in the organization of the oocyte cytoskeleton (microtubules and microfilaments) and are highly regulated in time and space. We review here the current knowledge of the interplay between the cytoskeleton and the cell cycle machinery in mouse oocytes, with an emphasis on the two major activities that control meiotic maturation in vertebrates, MPF (Maturation promoting factor) and CSF (Cytostatic factor).     

Fast continuous collision detection and handling for desktop virtual prototyping

This paper presents an overview of our recent work on continuous collision detection methods and constraints handling for rigid polyhedral objects. We demonstrate that continuous collision detection algorithms are practical in interactive dynamics simulation of complex polyhedral rigid bodies and show how continuous collision detection and efficient constraint-based dynamics algorithms allow us to perform various virtual prototyping tasks intuitively, precisely and robustly on commodity desktop computers. Especially, we present two applications of our system to actual industrial cases. We note that both tasks are performed with a simple 2D mouse on a high-end computer.     

Combined Post-harvest Treatments for Improving Quality and Extending Shelf-Life of Minimally Processed Broccoli Florets (<Emphasis Type="Italic">Brassica oleracea var. italica</Emphasis>)

Broccoli is an important source of many nutritional and bioactive compounds. However, its shelf-life is very short due to physicochemical losses and microbiological degradation. This study was undertaken to implement treatments that could improve the quality of ready-to-eat (RTE) broccoli during storage by evaluating the effect of pre-treatment with calcium chloride (CaCl₂) and alginate coating on the physicochemical and microbial properties of RTE broccoli. Broccoli florets were pre-treated with three different concentrations of CaCl₂ (1, 2.5, and 4 g L^?1), then coated with an alginate formulation (13 g L^?1) and stored at 4 °C for 24 days. Texture, color, weight loss, respiration rate, and total mesophilic flora (TMF) counts were evaluated at days 0, 3, 7, 14, and 24 of storage. The obtained results in this study showed that combining pre-treatment with calcium and alginate coating led to reducing the weight loss and respiration rate of broccoli, maintaining its color and texture as well as extending its shelf-life by 6 days. These results not only allowed reducing post-harvest losses resulting in the loss of the product but also have a major impact on the environment and resources involved in the production process.     

Lead, cadmium and aluminum in Canadian infant formulae, oral electrolytes and glucose solutions

Lead (Pb), cadmium (Cd) and aluminum (Al) were determined in 437 individual samples of infant formulae, oral electrolytes and 5% glucose solutions available in Canada. In the electrolytes, Cd and Pb concentrations were all below 0.01 and 0.041 ng g(-1), respectively. In the 5% glucose solutions, Pb and Cd levels averaged 0.01 and 0.09 ng g(-1), respectively. Reported on an as-consumed basis, Pb levels in milk- and soya-based formulae averaged 0.90 and 1.45 ng g(-1), respectively, while Cd levels averaged 0.23 and 1.18 ng g(-1), respectively Average Al levels on an as-consumed basis were 440 ng g(-1) (range 10-3400 ng g(-1)) in milk-based formulae and 730 ng g(-1) (range 230-1100 ng g(-1)) in soy-based formulae. Al concentrations increased in the following order: plain formula < low-iron formula < iron-supplemented formula < casein hydrolysate formula ≈ premature formula ≤ soy formula. For example, in the powdered formulae, average Al concentrations were 18 ng g(-1) for plain milk-based, 37 ng g(-1) for low-iron, 128 ng g(-1) for iron supplemented, 462 ng g(-1) for lactose-free, 518 ng g(-1) for hypoallergenic and 619 ng g(-1) for soy-based formula. Al concentrations, as-consumed, increased with decreasing levels of concentration: powder < concentrated liquid < ready-to-use. Formulae stored in glass bottles contained between 100 and 300 ng g(-1) more Al than the same formulae stored in cans. The source of the increased Al did not appear to be the glass itself, because most electrolytes and glucose solutions, also stored in glass, contained less than 8 ng g(-1) Al. Corresponding differences in Pb and Cd levels were not observed. Al concentrations varied substantially among manufacturers; however, all manufacturers were able to produce plain milk-based formulae containing less than 50 ng g(-1) Al, i.e. within the range of Al concentrations found in human milk. Next to soya-based and hypoallergenic formulae, premature formulae contained among the highest concentrations of Al, ranging 851-909 ng g(-1) from one manufacturer and 365-461 ng g(-1) from another.     

Surface properties and cell adhesion onto allylamine-plasma and amine-plasma coated glass coverslips

Surface properties of nanoparticles to be used for radioimmunotherapy need to be optimized to allow antibody conjugation while ensuring biocompatibility. We aimed to investigate cell adhesion and proliferation onto different coatings to be used for nanoparticles. C, CH _x or SiO _x coatings deposited onto glass coverslips by magnetron deposition as well as nitrogen functionalized materials synthetized using different reactive sputtering conditions and PPAA (plasma polymerized allylamine) coating, were compared. Amine functionalization did increase hydrophilicity in all the materials tested. Biocompatibility was assessed by measuring cell viability, morphology, attachment, spreading, and pro-inflammatory cytokine secretion. The results show that C and CN _x were the most biocompatible substrates while SiO _x and SiO _x N _y were the most toxic materials. PPAA coatings displayed unexpectedly an intermediate biocompatibility. A correlation could be observed between wettability and cell proliferation except for C coated surface, indicating that more complex processes than hydrophilicity alone are taking place that affect cell functions.     

Microstructure and properties of copper and aluminum alloy 3003 heavily worked by equal channel angular extrusion

A technique invented in the former Soviet Union and recently introduced in the United States, called equal channel angular extrusion (ECAE), produces intense and uniform deformation by simple shear and is applied to 25 × 25 × 152-mm billets of Cu 101 and Al 3003. Microcrystalline structures with a grain size of 0.2 to 0.4 μm are created during room-temperature multipass ECAE deformation for true strains lying in the range ε=2.31 to 9.24. Evidence shows that intense simple shear deformation promotes dynamic or continuous recrystallization by subgrain rotation. The effects of the number of extrusion passes and deformation route for Cu 101, and the deformation route after four passes for Al 3003, are studied. Increasing the number of ECAE passes in Cu 101 causes strength to reach saturation and grain refinement stabilization after four passes (true strain of 4.68), and subgrain misorientation to increase as the number of passes increases. For multipass ECAE with billet orientation constant (route A) or rotated 90 deg between all passes (route B), two levels of structures are created inside the original grains: shear bands (first level) and very fine subgrains (second level) within the shear bands. For a billet rotation of 180 deg between passes (route C), an unusual event is observed. At each even numbered pass, shear bands nearly disappear and only subgrains are present inside the original grains. Route B gives the highest strength, whereas route C produces a more equiaxed and stable microstructure. Subsequent static recrystallization increases the average grain size to 5 to 10 μm.     

Influence of sandwinds on the durability of polyethylene greenhouse aged under sub-saharan climatic conditions

Sandwinds have been simulated with an apparatus developed in our laboratory. Infra red and UV visible spectroscopies, contact angle and interferential microscopy investigations have been performed on untreated polyethylene film sample and on samples submitted at 40 °C to a simulated sandwind for times up to 4 hours. The surface roughness is modified, leading to drastic decrease of the ultra-violet visible light transmission. This phenomenon is due to the presence of small sand particles inlaid in the sample surface and due to surface erosion. In the time range of our experiments, no chemical action due to the sandwind is observed. Electronic Publication     

Laser offset-frequency locking up to 20 GHz using a low-frequency electrical filter technique

A simple, easy-to-implement, and robust technique is reported to offset lock two semiconductor lasers with a frequency difference easily adjustable up to a couple of tens of gigahertz (10 and 19 GHz experimentally demonstrated). The proposed scheme essentially makes use of low-frequency control electronics and may be implemented with any type of single mode semiconductor laser, without any requirement for the laser linewidth. The technique is shown to be very similar to the wavelength modulation spectroscopy method commonly used for laser stabilization onto molecular absorption lines, as demonstrated by experimental results obtained using 935 nm laser diodes.