Evaluation of mass loss of weld-deposited hardfacing with cored wire Ti-FeCrC alloy

In this article, we have studied the mass loss of hardfacing applied by flux-cored arc welding. Heat input, shielding gas and number of layers of coating were changed to application of Fe–Cr–Ti–C self-shielded tubular wire. Overlapping beads were deposited on plates of carbon steel AISI 1020 to analyse the mass loss, hardness and microstructure. For the analysis of mass loss, beads were deposited forming overlapping layers of coatings. Hardness measurements were performed on the surface of the specimens of wear. A rubber wheel abrasion tester was used to access the mass loss of coatings. The coatings had retained austenite and martensite microstructure with carbides finely dispersed in the matrix. The main factors that contributed to the increase in mass loss were the cracks due to higher cooling rate of the samples deposited with low heat input, the dilution in the first layer of all samples also contributed to the increase in mass loss. The smallest mass losses were those deposited coatings with high heat input, the second and fourth layers, the samples AC2, AC4 and AS2. The volume fraction of titanium carbides contributed to the decrease in the mean free path between the particles of carbides and increased the wear resistance of the coatings.     

Clinical and Molecular Characterization of Patients with Mucopolysaccharidosis Type I in an Algerian Series

Mucopolysaccharidoses (MPS’s) represent a subgroup of lysosomal storage diseases related to a deficiency of enzymes that catalyze glycosaminoglycans degradation. Mucopolysaccharidosis type I (MPS I) is a rare autosomal recessive disorder caused by a deficiency of α-l-iduronidase encoded by the IDUA gene. Partially degraded heparan sulfate and dermatan sulfate accumulate progressively and lead to multiorgan dysfunction and damage. The aim of this study is to describe the clinical, biochemical, and molecular characteristics of 13 Algerian patients from 11 distinct families. MPS I diagnosis was confirmed by molecular study of the patients’ IDUA gene. Clinical features at the diagnosis and during the follow-up are reported. Eighty-four percent of the studied patients presented with a mild clinical phenotype. Molecular study of the IDUA gene allowed the characterization of four pathological variations at the homozygous or compound heterozygote status: IDUA NM_00203.4:c.1598C>G-p.(Pro533Arg) in 21/26 alleles, IDUA NM_00203.4:c.532G>A-p.(Glu178Lys) in 2/26 alleles, IDUA NM_00203.4:c.501C>G-p.(Tyr167*) in 2/26 alleles, and IDUA NM_00203. 4: c.1743C>G-p.(Tyr581*) in 1/26 alleles. This molecular study unveils the predominance of p.(Pro533Arg) variation in our MPS I patients. In this series, the occurrence of some clinical features linked to the Scheie syndrome is consistent with the literature, such as systematic valvulopathies, corneal opacity, and umbilical hernia; however, storage signs, facial dysmorphic features, and hepatomegaly were more frequent in our series. Screening measures for these debilitating diseases in highly consanguineous at-risk populations must be considered a priority health problem.     

Structure‐Based Mechanism of Oleate Hydratase from Elizabethkingia meningoseptica

Hydratases provide access to secondary and tertiary alcohols by regio‐ and/or stereospecifically adding water to carbon‐carbon double bonds. Thereby, hydroxy groups are introduced without the need for costly cofactor recycling, and that makes this approach highly interesting on an industrial scale. Here we present the first crystal structure of a recombinant oleate hydratase originating from Elizabethkingia meningoseptica in the presence of flavin adenine dinucleotide (FAD). A structure‐based mutagenesis study targeting active site residues identified E122 and Y241 as crucial for the activation of a water molecule and for protonation of the double bond, respectively. Moreover, we also observed that two‐electron reduction of FAD results in a sevenfold increase in the substrate hydration rate. We propose the first reaction mechanism for this enzyme class that explains the requirement for the flavin cofactor and the involvement of conserved amino acid residues in this regio‐ and stereoselective hydration.     

Long Distance Enhancement of Nonlinear Optical Properties Using Low Concentration of Plasmonic Nanostructures in Dye Doped Monolithic Sol–Gel Materials

Monolithic sol–gel silica composites incorporating platinum‐based chromophores and various types of gold nanoparticles (AuNPs) are prepared and polished to high optical quality. Their photophysical properties are investigated. The glass materials show well‐defined localized surface plasmon resonance (SPR) absorbance from the visible to NIR. No redshifts of the AuNP plasmon absorption peaks due to the increase in nanoparticle doping concentration are observed in the glasses, proving that no or very small SPR coupling effects occur between the AuNPs. At 600 nm excitation, but not at 532 nm, the AuNPs improve the nonlinear absorption performance of glasses codoped with 50 × 10^?3 m of a Pt‐acetylide chromophore. The glasses doped with lower concentrations of AuNPs (2–5 μm average distance) and 50 × 10^?3 m in chromophore, show a marked improvement in nonlinear absorption, with no or only small improvement for the more highly AuNP doped glasses. This study shows the importance of excitation wavelength and nanoparticle concentration for composite systems employing AuNPs to improve two‐photon absorption of chromophores.     

Assessment of bottom-up sectoral and regional mitigation potentials

The greenhouse gas mitigation potential of different economic sectors in three world regions are estimated using a bottom-up approach. These estimates provide updates of the numbers reported in the Fourth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC AR4). This study is part of a larger project aimed at comparing greenhouse gas mitigation potentials from bottom-up and top-down approaches. The sectors included in the analysis are energy supply, transport, industry and the residential and service sector. The mitigation potentials range from 11 to 15 GtCO₂eq. This is 26–38% of the baseline in 2030 and 47–68% relative to the year 2000. Potential savings are estimated for different cost levels. The total potential at negative costs is estimated at 5–8% relative to the baseline, with the largest share in the residential and service sector and the highest reduction percentage for the transport and industry sectors. These (negative) costs include investment, operation and maintenance and fuel costs and revenues at moderate discount rates of 3–10%. At costs below 100 US$/tCO₂, the largest potential reductions in absolute terms are estimated in the energy supply sector, while the transport sector has the lowest reduction potential.     

Kinetics of heavy metal vaporization from model wastes in a fluidized bed

Metal vaporization experiments were carried out in an atmospheric fluidized bed to study the influence of operating conditions on the extent of heavy metal (HM) release in fumes from municipal solid waste incinerators. Modelwastes spiked with compounds of Pb, Cd, and Zn were used. The parameters studied were temperature, treatment duration, matrix of the model waste (mineral and organic), HM initial speciation, and gas composition (N2, air, air + HCl, gas mixture simulating the incinerators). The extent of vaporization was measured by solid sample analysis and on-line analysis of the gaseous effluent, after customization of the ICP technique for gas analysis. The results indicate the metal vaporization rate is very high initially and then slows. The results with mineral matrices give the decreasing order of volatility Cd > Pb > Zn, but in industrial incinerators Zn volatilizes slightly more than Pb. Temperature (especially for porous alumina) and mineral matrix have a strong influence on the HM vaporization, but HCl concentration and HM initial speciation do not. The gas composition and the initial metal concentration are significant parameters. The matrix influence clearly denoted the mass transfer limitations in the vaporization process from mineral matrix.     

Planar-integrated optical vector-matrix multiplier

We present the design of a planar-integrated optoelectronic vector-matrix multiplier. The inherent parallel-processing potential is fully exploited by optical implementation of multiplications and summations. Planar integration makes the free-space optical system compatible with electronic VLSI technologies. It is composed of phase-only diffractive optical elements, which implement lens and multiple-beam-splitter functions. A demonstrator version of the optical system for a matrix of size 10 x 10 was fabricated on quartz glass by means of multimask lithography and reactive ion etching. It shows low cross talk and good uniformity of the signals.     

Kinetics of the liquid phase synthesis and hydrolysis of butyl lactate catalysed by cation exchange resin

Esterification of lactic acid with butanol catalysed by cation-exchange resin was carried out in a batch reactor in dioxane and toluene. The reaction rate was found to be first order with respect to catalyst and acid concentrations. The inhibiting effect of water and butanol has been evaluated. The rate data were correlated with a kinetic model based on inhibition by water and butanol.