Feasibility Study of Batteryless Temperature Transponders Using Miniature Microwave Cavity Resonators

Batteryless temperature transponders have been constructed and tested. The design employs a sensing element consisting of a miniature cavity resonator loaded with a ceramic material of high dielectric constant and large temperature coefficient of resonant frequency. This is connected by thin coaxial cable to a small dipole or sector antenna. Prototypes with sensors 3 mm in diameter have been fabricated and can resolve temperature differences of 0.1°C in air. Signals have been obtained from transponders implanted in anesthetized rats, but antenna orientation is a critical and limiting factor that will require further efforts before a system is capable of operating in freely roaming animals.     

Evidence for Remote Effects of Dreissenid Mussels on the Amphipod Diporeia: Analysis of Lake Ontario Benthic Surveys, 1972–2003

The status of invasive dreissenid mussels (Dreissena polymorpha and D. bugensis) and native amphipods (Diporeia spp.) in Lake Ontario was assessed in 2003 and compared with historical data. D. polymorpha (zebra mussels) were rarely observed in 2003, having been displaced by D. bugensis (quagga mussels). D. bugensis expanded its depth range from 38 m depth in 1995 to 174 m in 2003 and this dreissenid reached densities averaging 8,000/m² at all sites < 90 m. During the same time period, Diporeia populations almost completely disappeared from 0–90 m depth, continuing a declining trend from 1994–1997 reported in previous studies. The average density of Diporeia in the 30–90 m depth interval decreased from 1,380/m² to 63/m² between 1997 and 2003. Prior to 2003, areas deeper than 90 m represented a refuge for Diporeia, but even these deep populations decreased, with densities declining from 2,181/m2 in 1999 to 545/m2 in 2003. Two common hypotheses for the decline of Diporeia in the Great Lakes are food limitation and a toxin/pathogen associated with dreissenid pseudofeces. The Diporeia decline in deep waters preceded the expansion of D. bugensis to these depths, and suggests that shallow dreissenid populations remotely influence profundal habitats. This pattern of decline is consistent with mechanisms that act from some distance including nearshore dreissenid grazing and downslope transport of pseudofeces.     

Fast, large-scale model predictive control by partial enumeration

Partial enumeration (PE) is presented as a method for treating large, linear model predictive control applications that are out of reach with available MPC methods. PE uses both a table storage method and online optimization to achieve this goal. Versions of PE are shown to be closed-loop stable. PE is applied to an industrial example with more than 250 states, 32 inputs, and a 25-sample control horizon. The performance is less than 0.01% suboptimal, with average speedup factors in the range of 80-220, and worst-case speedups in the range of 4.9-39.2, compared to an existing MPC method. Small tables with only 25-200 entries were used to obtain this performance, while full enumeration is intractable for this example.     

Estimating standard errors of accuracy assessment statistics under cluster sampling

Cluster sampling is a viable sampling design for collecting reference data for the purpose of conducting an accuracy assessment of land-cover classifications obtained from remotely sensed data. The formulas for estimating various accuracy parameters such as the overall proportion of pixels correctly classified, the kappa coefficient of agreement, and user's and producer's accuracy are the same under cluster sampling and simple random sampling, but the formulas for estimating standard errors differ between the two designs. If standard error formulas appropriate for cluster sampling are not employed in an accuracy assessment based on this design, the reported variability of map accuracy statistics is likely to be grossly misleading. The proper standard error formulas for common map accuracy statistics are derived for one-stage cluster sampling. The validity of these standard error formulas is verified by a small simulation study, and the standard errors computed according to the usual simple random sampling formulas are shown to underestimate the true cluster sampling standard errors by 20–70% if the intracluster correlation is moderate.     

Prediction of fatigue behaviour in stress-concentrators of arbitrary geometry

A new method is outlined which aims to predict high-cycle fatigue behavior of components which fail from stress-concentrators. This involves examination of the stress field in the vicinity of the stress-concentrator, and comparison with stress fields for cracks at known stress intensities. Methods which are currently used for simple notch geometries can thus be generalised, making the approach applicable to stress concentrators of any geometry. The method of prediction is shown to be stable, providing a solution of good accuracy when compared to analytical methods for standard specimen geometries. Favourable comparisons with experimental data have been achieved both for standard notches and for a corner geometry which represents a typical component case.     

The computer-aided design of microwave matching networks

Matching networks, as used between the consecutive stages of an amplifier to manage the transfer of power between the complex source impedance, the active devices, and the load, continue to be of importance, particularly in microwave systems. Synthesis techniques for these networks have evolved from the classical theory to novel numerical approaches that yield significant practical advantages. We review here several well-known design methods, including the classical derivation, sloped-approximation synthesis, and the real-frequency technique. Also considered are enhancements and variations of these methods. Furthermore, we describe the iterated analysis approach, which appears to provide the greatest design flexibility, efficiency, and accuracy to date. Examples are given which illustrate the relative merits of some of the more modern computer-assisted techniques. Finally, we discuss ideas for further research in the area of matching network synthesis.     

Formatting texts accessed randomly

Full-text systems that access text randomly cannot normally determine the format operations in effect for a given target location. The problem can be solved by viewing the format marks as the non-terminals in a format grammar. A formatted text can then be parsed using the grammar to build a data structure that serves both as a parse tree and as a search tree. While processing a retrieved segment, a full-text system can follow the search tree from root to leaf, collecting the format marks encountered at each node to derive the sequence of commands active for that segment. The approach also supports the notion of a ‘well formatted’ document and provides a means for verifying the well-formedness of a given text. To illustrate the approach, a sample set of format marks and a sample grammar are given suitable for formatting and parsing the article as a sample text.     

The moderating influence of attitude strength on the susceptibility to context effects in attitude surveys.

In 3 experiments, the authors assessed whether attitude strength moderates the susceptibility of attitudes to item context effects in surveys. In Experiment 1, respondents completed multiple measures of attitude strength. Three weeks later, respondents participated in a context experiment. Results revealed that respondents with weak attitudes exhibited significantly larger context effect for 1 of 2 issues. In Experiment 2, the results of Experiment 1 were conceptually replicated by use of measures of interattitudinal embeddedness to assess attitude strength. In Experiment 3, significant strength-moderated context effects were found when attitude strength was assessed in a multi-item, multidimensional manner but not when it was assessed with a single item. Discussion focuses on measurement and theoretical issues related to the moderation and mediation of context effects in attitude surveys. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Something Old,Something New: Integrating Engineering Practice into the Teaching of Engineering Mechanics

This paper presents a multifaceted method for teaching engineering mechanics designed to satisfy the following set of desiderata: (1) integrate engineering practice into the teaching of engineering science; (2) address a wide set of learning styles; (3) provide opportunities for practice in group work and learning; (4) promote communication and synthesizing skills; (5) engage students in the teaching and learning process; (6) maintain traditional achievement levels with respect to traditional measures; (7) motivate students to continue their engineering studies; and (8) maintain reasonable resource demands. Consistent with this variety of objectives, the approach presented here is composed of a variety of ingredients. In addition to the standard homework problems and exams, these ingredients include design projects, group work, basic competency exams, computational environments for simulating and visualizing phenomena, multimedia instructional tools, hands-on experiences, and student presentations. This educational model is intended to be suitable for teaching engineering mechanics in general, but this paper focuses on a particular sophomore-level mechanics of materials course in which the method has been implemented, refined over several years of classroom use, and tested relative to traditional approaches. The paper describes the and techniques that together make up the method, followed by summaries of the results of evaluations that have been applied to the course.