Isotherm analyses for single component and multi-component metal sorption onto lignite

The adsorption of the three metal ions, copper, cadmium and zinc in single component and multi-component mixtures in aqueous solutions by lignite is reported. A comparison is made between the single component saturation uptake and the multi-component uptakes. The isotherms indicate a competitive uptake with copper being preferentially absorbed by the lignite in multi-component solutions. The isotherms are plotted to obtain the Langmuir constants, the Freundlich constants and the Redlich–Peterson constants. Lignite is shown to possess an affinity for the metal ions which make its use as an adsorbent a possible alternative to the use of more expensive activated carbons.     

Assessment of baroreceptor-cardiac reflex sensitivity using time domain analysis in patients with IDDM and the relation to left ventricular mass index

Autonomic dysfunction in insulin-dependent diabetic (IDDM) patients has been associated with abnormalities of left ventricular function and an increased risk of sudden death. A group of 30 patients with IDDM and 30 age, sex and blood pressure matched control subjects underwent traditional tests of autonomic function. In addition, baroreceptor-cardiac reflex sensitivity (BRS) was assessed using time domain (sequence) analysis of systolic blood pressure and pulse interval data recorded non-invasively using the Finapres beat-to-beat blood pressure recording system. 'Up BRS' sequences-increases in systolic blood pressure associated with lengthening of R-R interval, and 'down BRS' sequences-decreases in systolic blood pressure associated with shortening of R-R interval were identified and BRS calculated from the regression of systolic blood pressure on R-R interval for all sequences. We also assessed heart rate variability using power spectral analysis and, after expressing components of the spectrum in normalised units, assessed sympathovagal balance from the ratio of low to high frequency powers. IDDM subjects underwent 2-D echocardiography to assess left ventricular mass index. Standard tests of autonomic function revealed no differences between IDDM patients and control subjects, but dramatic reductions in baroreceptor-cardiac reflex sensitivity were detected in IDDM patients. 'Up BRS' when supine was 11.2 +/- 1.5 ms/mmHg (mean +/- SEM) compared with 20.4 +/- 1.95 in control subjects (p < 0.003) and when standing was 4.1 +/- 1.9 vs 7.6 +/- 2.7 ms/mmHg (p < 0.001). Down BRS when supine was 11.5 +/- 1.2 vs 22 +/- 2.6 (p < 0.001) and standing was 4.4 +/- 1.9 vs 7.3 +/- 2.5 ms/mmHg (p < 0.003). There were significant relations between impairment of the baroreflex and duration of diabetes (p < 0.001) and poor glycaemic control (p < 0.001). From a fast Fourier transformation of supine heart rate data and using a band width of 0.05-0.15 Hz as low-frequency and 0.2-0.35 Hz as high frequency total spectral power of R-R interval variability was significantly reduced in the IDDM group for both low-frequency (473 +/- 62.8 vs 746.6 +/- 77.6 ms2 p = 0.002) and high frequency bands 125.2 +/- 12.9 vs 459.3 +/- 89.8 ms2 p < 0.0001. When the absolute powers were expressed in normalised units the ratio of low frequency to high frequency power (a measure of sympathovagal balance) was significantly increased in the IDDM group (2.9 +/- 0.53 vs 4.6 +/- 0.55, p < 0.002 supine: 3.8 +/- 0.49 vs 6.6 +/- 0.55, p < 0.001 standing). Thus, time domain analysis of baroreceptor-cardiac reflex sensitivity detects autonomic dysfunction more frequently in IDDM patients than conventional tests. Impaired BRS is associated with an increased left ventricular mass index and this abnormality may have a role in the increased incidence of sudden death seen in young IDDM patients.     

Humans: the missing link in manufacturing simulation?

Computer based discrete event simulation (DES) is one of the most commonly used aids for the design of automotive manufacturing systems. However, DES tools represent machines in extensive detail, while only representing workers as simple resources. This presents a problem when modelling systems with a highly manual work content, such as an assembly line. This paper describes research at Cranfield University, in collaboration with the Ford Motor Company, founded on the assumption that human variation is the cause of a large percentage of the disparity between simulation predictions and real world performance. The research aims to improve the accuracy and reliability of simulation prediction by including models of human factors.     

Personality similarity in twins reared apart and together.

We administered the Multidimensional Personality Questionnaire (MPQ) to 217 monozygotic and 114 dizygotic reared-together adult twin pairs and 44 monozygotic reared-apart adult twin pairs. A four-parameter biometric model (incorporating genetic, additive versus nonadditive, shared family-environment, and unshared environment components) and five reduced models were fitted through maximum-likelihood techniques to data obtained with the 11 primary MPQ scales and its 3 higher order scales. Solely environmental models did not fit any of the scales. Although the other reduced models, including the simple additive model, did fit many of the scales, only the full model provided a satisfactory fit for all scales. Heritabilities estimated by the full model ranged from .39 to .58. Consistent with previous reports, but contrary to widely held beliefs, the overall contribution of a common family-environment component was small and negligible for all but 2 of the 14 personality measures. Evidence of significant nonadditive genetic effects, possibly emergenic (epistatic) in nature, was obtained for 3 of the measures. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An SS1-SS2 {beta}-barrel structure for the voltage-activated potassium channel

To examine the feasibility of a ß structure for thepore-lining region of the voltage-gated potassium channel, wehave characterized a family of 12 antiparallel ß-barrels.Each is comprised of four identical pairs of ß-strandsorganized with approximate 4-fold symmetry about a channel axis.The Cand N-termini of the ß-strand pairs are assumedto be at the extracellular end of the channel, and each pairis connected by a hairpin turn at the intracellular end of thechannel. The models differ in the residues located in the hairpinturn and in the orientation of the two strands of each pairin the barrel, i.e. whether the C-terminus of a pair is clockwise(CW) or counterclockwise (CCW) from the N-terminus when thechannel is viewed from outside the cell. Following known structureprecedents and potential energy predictions, the barrel is assumedto be right-twisting in all cases. All models have crowded layersof inward-projecting aromatic sidechains near the center ofthe channel which could regulate channel selectivity. The modelswith an odd number of amino acids in the hairpin turn have theadvantage of predicting that F433 points into the barrel, butthe disadvantage that V438 does not. Of these models, two ofthe models are most consistent with the external tetraethylanunonhim(TEA) block data, and of those, one (T439 CCW 3:5) is most consistentwith the internal TEA block data.     

Deconvolution methods for mitigation of transverse blurring in optical coherence tomography.

Imaging resolution in optical coherence tomography (OCT) is a key determinant for acquiring clinically useful optical biopsies of tissues. In contrast to light or confocal microscopy, the axial and transverse resolutions in OCT are independent and each can be analyzed individually. A method for mitigating transverse blurring and the apparent loss of transverse resolution in OCT by means of Gaussian beam deconvolution is presented. Such a method provides better representation of a specimen by using known physical parameters of a lens. To implement this method, deconvolution algorithms based on a focal-dependent kernel are investigated. First, the direct inverse problem is investigated using two types of regularization, truncated singular value decomposition, and Tikhonov. Second, an iterative expectation maximization algorithm, the Richardson-Lucy algorithm, with a beam-width-dependent iteration scheme is developed. A dynamically iterative Richardson-Lucy algorithm can reduce transverse blurring by providing an improvement in the transverse point-spread-function for sparse scattering samples in regions up to two times larger than the confocal region of the lens. These deblurring improvements inside and outside of the confocal region, which are validated experimentally, are possible without introducing new optical imaging hardware or acquiring multiple images of the same specimen. Implementation of this method in sparse scattering specimens, such as engineered tissues, has the potential to improve cellular detection and categorization.     

Application of fiber optic sensors to fracture mechanics problems

An experimental study is conducted to show the application of fiber optic sensors to fracture mechanics problems. Mode I stress intensity factors are obtained using single mode optical fibers in single edge notched specimens fabricated from aluminium. A Mach–Zehnder interferometric set up is used during the experiments. The experimental results compare well with theoretical predictions.     

The Effect of Ozone Gas-Liquid Contacting Conditions in a Static Mixer on Microorganism Reduction

The effect of gas-liquid contacting conditions in a static mixer on ozone transfer efficiency and reduction of Bacillus subtilis spores was studied in an experimental ozone contactor. An empirical mathematical model was developed that related the transfer efficiency in the experimental system to the superficial liquid velocity in the mixer, the gas-liquid flow rate ratio and the height of the down-stream bubble column. Spore reduction was determined primarily by the dissolved ozone concentration-time (C_avgt_m) product in the reactive flow segment and was independent of the gas-liquid contacting conditions in the static mixer. In an integrated ozone contacting system, the static mixer should be designed to maximize ozone mass transfer while the reactive flow segment should be designed for efficient microorganism reduction.