Topographical and chemical characterization of polymer surfaces modified by physical and chemical processes

Nanoscale changes to the surface of polymeric materials enables changes in materials' adhesion, wettability, printability, chemical functionality, and bioactivity, while maintaining desirable bulk properties. Polymer surface modification is therefore used in applications such as antimicrobial or non‐fouling materials, biosensors, and active packaging. The range of available modification and analytical techniques used across laboratories prevents accurate comparison of techniques in terms of their effects on surface chemistry and topography. It was therefore our goal to evaluate the effects of four surface modification techniques (chromic acid, piranha solution, ultraviolet irradiation, and oxygen plasma) on polyethylene films. Changes in surface chemistry and topography were quantified using attenuated total reflectance (ATR) Fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM), contact angle measurement, and direct measurement of available surface carboxylic acids. Roughness increased in the order: piranha (57.7 nm); oxygen plasma (76.3 nm); UV irradiation (76.4 nm); chromic acid (120 nm). Hydrophobicity decreased in the order: piranha (77.20), chromic acid (73.50), oxygen plasma (61.70), UV irradiation (58.70). Functionalization (by IR absorbance intensity between 1680–1780 cm⁻¹) increased in the order: oxygen plasma (0.06), piranha (0.09), chromic acid (0.34), UV irradiation (0.50). By analyzing these methods using consistent analytical techniques, side‐by‐side comparisons have been accurately made. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and properties of thermally conductive photosensitive polyimide/boron nitride nanocomposites

A new thermally conductive photoresist was developed. It was based on a dispersion of boron nitride (BN) nanoflakes in a negative‐tone photosensitive polyimide (PSPI) precursor. 3‐Mercaptopropionic acid was used as the surfactant to modify the BN nanoflake surface for the dispersion of BN nanoflakes in the polymer. The thermal conductivity of the composite films increased with increasing BN fraction. The thermal conductivity of the PSPI/BN nanocomposite was up to 0.47 W m⁻¹ K⁻¹ for a mixture containing 30 wt % nanosized BN filler in the polyimide matrix. Patterns with a resolution of 30 μm were obtained from the PSPI/BN nanocomposites. The PSPI/BN nanocomposites had excellent thermal properties. Their glass‐transition temperatures were above 360°C, and the thermal decomposition temperatures were over 460°C. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of a positive‐working,aqueous‐base‐developable photosensitive polyimide precursor

A positive‐working, aqueous‐base‐developable photosensitive polyimide precursor based on poly(amic ester)‐bearing phenolic hydroxyl groups and a diazonaphthoquinone photosensitive compound was developed. The poly(amic ester) was prepared from a direct polymerization of 2,2′‐bis‐(3‐amino‐4‐hydroxyphenyl)hexafluoropropane and bis(n‐butyl)ester of pyromellitic acid in the presence of phenylphosphonic dichloride as an activator. Subsequently, the thermal imidization of the poly(amic ester) precursor at 300°C produced the corresponding polyimide. The inherent viscosity of the precursor polymer was 0.23 dL/g. The cyclized polyimide showed a glass‐transition temperature at 356°C and a 5% weight loss at 474°C in nitrogen. The structures of the precursor polymer and the fully cyclized polymer were characterized by Fourier transform infrared spectroscopy and ¹H‐NMR. The photosensitive polyimide precursor containing 25 wt % diazonaphthoquinone photoactive compound showed a sensitivity of 150 mJ/cm² and a contrast of 1.65 in a 3 μm film with 1.25 wt % tetramethylammonium hydroxide developer. A pattern with a resolution of 10 μm was obtained from this composition. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 352–358, 2002     

Particle motion in the fountain flow region during filling of a tube with a viscoelastic fluid

We present the results of an investigation of particle motion behind the advancing free surface during the filling of an initially empty tube with a viscoelastic fluid. Particle motion in the vicinity of an advancing free surface (the fountain flow region) is of significance in a number of processes used to form composite materials, notably injection and compression molding. This motion determines, to a large extent, the distribution of the reinforcing phase in the molded part. We show experimentally that an isolated spherical particle moves behind the interface in characteristic orbits, remaining in close proximity to the advancing free surface. This is in stark contrast to what happens in a Newtonian fluid. In that case, the particle is deposited on the tube walls by the fountain flow and never again reaches the faster moving free surface. The particle motion behind the interface is modeled with a combination of equations that describe the advection of the particle due to convective/fountain flow and its lateral migration due to viscoelasticity. This model neglects the finite size of the particle and is thus unable to capture the full details of the observed motion. However, the qualitative agreement between the experimental results and the modeling predictions suggests that the observed particle motion is the result of the combined effect of viscoelasticity and fountain flow.     

Structure-function studies of an IGF-I analogue that can be chemically cleaved to a two-chain mini-IGF-I

The structure and biological activities of two disulphide isomersof a C-region deletion mutant of insulin-like growth factor-I(IGF-I) which has an Asn–Gly link engineered at the junctionof the A- and B-regions were studied before and after chemicalcleavage. Circular dichroism (CD) spectra and binding affinityto IGF binding protein 3 (IGFBP3) indicated that the treatmentwith hydroxylamine did not disrupt the overall tertiary foldof the hormones. Cleavage restored some binding affinity forthe IGF-I receptor in both isomers and weakly restored the abilityto stimulate incorporation of tritiated thymidine into DNA inNIH 3T3 fibroblasts transfected with the human IGF-I receptor.Cleavage also restored metabolic capacity, as measured by theability of the isomers to promote lipogenesis in isolated ratadipocytes through the insulin receptor. These results are consistentwith the theory that binding of IGF-I to the IGF-I receptorrequires a conformational change similar to that involved ininsulin binding the insulin receptor. The weak affinity forthe IGF-I receptor after cleavage is consistent with the beliefthat residues in the C-region interact with the IGF-I receptor.This structural difference between insulin and IGF-I gives eacha higher binding affinity for its own receptor.     

Devitrification Kinetics and Mechanism of K2O–CaO–SrO–BaO–B2O3–SiO2 Glass-Ceramic

The devitrification kinetics and mechanism of a low-dielectric, low-temperature, cofirable K₂O–CaO–SrO–BaO–B₂O₃–SiO₂ glass-ceramic have been investigated. Crystalline phases including cristobalite (SiO₂) and pseudowollastonite ((Ca,Ba,Sr) SiO₃) are formed during firing. Activation energy analysis shows that the nucleation of the crystalline phases is controlled by phase separation of the glass. The crystallization kinetics of both cristobalite and pseudowollastonite obey Avrami-like behavior, and the results show an apparent activation energy close to that of the diffusion of alkaline and alkali ions in the glass, suggesting that diffusion is rate limiting. The above conclusion is further supported by analysis of measured growth rates.     

The effect of various fire‐exposed surface dimensions on the spalling of concrete specimens

Concrete spalling due to fire exposure is often defined as the sudden detachment of fragments from a concrete surface. It can be quantified by various parameters of which weight loss and spalling depth are the most common ones. The risk of spalling is influenced by many factors such as concrete composition, heating rate and applied testing methods. A reduced scale testing method should be developed to analyse the spalling behaviour and to understand its effectiveness in more detail. As a subsection of this development, this study aimed to analyse the effect of different‐sized, circular heated areas in semi full‐scale fire tests. Therefore, vermiculite slabs with varying cut‐outs in their centre were placed between a specimen made of a spalling‐sensitive concrete and the combustion chamber. The combustion chamber was heated following a standard fire curve. Our experimental results show that the thermal expansion inside of equal‐sized specimens is strongly dependent on the size of the heated area. In addition, this area also affects thermal stresses. They decrease as a result of lower temperature gradients for tests with smaller unheated boundary areas. Apart from this, the analysis of fragments shows no correlation between their relative volume distribution and the heated area. Copyright © 2014 John Wiley & Sons, Ltd.     

Biological Evaluation and X‐ray Co‐crystal Structures of Cyclohexylpyrrolidine Ligands for Trypanothione Reductase,an Enzyme from the Redox Metabolism of Trypanosoma

The tropical diseases human African trypanosomiasis, Chagas disease, and the various forms of leishmaniasis are caused by parasites of the family of trypanosomatids. These protozoa possess a unique redox metabolism based on trypanothione and trypanothione reductase (TR), making TR a promising drug target. We report the optimization of properties and potency of cyclohexylpyrrolidine inhibitors of TR by structure‐based design. The best inhibitors were freely soluble and showed competitive inhibition constants (K_i) against Trypanosoma (T.) brucei TR and T. cruzi TR and in vitro activities (half‐maximal inhibitory concentration, IC₅₀) against these parasites in the low micromolar range, with high selectivity against human glutathione reductase. X‐ray co‐crystal structures confirmed the binding of the ligands to the hydrophobic wall of the “mepacrine binding site” with the new, solubility‐providing vectors oriented toward the surface of the large active site.     

Modeling the dynamics of tamponade multicomponent gases during retina reattachment surgery

Vitrectomy and pneumatic retinopexy are common surgical procedures used to treat retinal detachment. To reattach the retina, gases are used to inflate the vitreous space allowing the retina to attach by surface tension and buoyancy forces that are superior to the location of the bubble. These procedures require the injection of either a pure tamponade gas, such as C₃F₈ or SF₆, or mixtures of these gases with air. The location of the retinal detachment, the anatomical spread of the retinal defect, and the length of time the defect has persisted, will determine the suggested volume and duration of the gas bubble to allow reattachment. After inflation, the gases are slowly absorbed by the blood allowing the vitreous to be refilled by aqueous. We have developed a model of the mass transfer dynamics of tamponade gases during pneumatic retinopexy or pars plana vitrectomy procedures. The model predicts the expansion and persistence of intraocular gases (C₃F₈, SF₆), oxygen, nitrogen, and carbon dioxide, as well as the intraocular pressure. The model was validated using published literature in rabbits and humans. In addition to correlating the mass transfer dynamics by surface area, permeability, and partial pressure driving forces, the mass transfer dynamics are affected by the percentage of the tamponade gases. Rates were also correlated with the physical properties of the tamponade and blood gases. The model gave accurate predictions in humans. © 2017 American Institute of Chemical Engineers AIChE J, 63: 3651–3662, 2017     

Experimental study of the burner for FAA fire test: NexGen burner

The NexGen (Sonic) burner is the new burner developed by the Federal Aviation Administration, FAA, to replace old oil burners used for the required fire certification tests on power plant‐related materials, as it provides the capability to control both air and fuel flow rates. During a fire test, the burner is supposed to simulate a certain fire condition, so the flame properties should be robust and repeatable. The NexGen burner can achieve this due to the precise fuel and air controls. However, the current calibration criterion (ISO2685:1998 and AC20‐135) may not be good enough to ensure consistent flame properties. In the presented work, the sensitivity of the burner performance to air and fuel flow rate, as measured by the temperature and heat flux for calibration purposes, was studied. Additionally, the influence of the turbulator and the thermocouple size used for flame calibration was also studied. The impact of varying fuel/air ratio and thermocouple sizes was studied by conducting fire tests on aluminum samples, to show the inadequacies in the current calibration standards.