The Multifunctional Sactipeptide Ruminococcin C1 Displays Potent Antibacterial Activity In Vivo as Well as Other Beneficial Properties for Human Health

The world is on the verge of a major antibiotic crisis as the emergence of resistant bacteria is increasing, and very few novel molecules have been discovered since the 1960s. In this context, scientists have been exploring alternatives to conventional antibiotics, such as ribosomally synthesized and post-translationally modified peptides (RiPPs). Interestingly, the highly potent in vitro antibacterial activity and safety of ruminococcin C1, a recently discovered RiPP belonging to the sactipeptide subclass, has been demonstrated. The present results show that ruminococcin C1 is efficient at curing infection and at protecting challenged mice from Clostridium perfringens with a lower dose than the conventional antibiotic vancomycin. Moreover, antimicrobial peptide (AMP) is also effective against this pathogen in the complex microbial community of the gut environment, with a selective impact on a few bacterial genera, while maintaining a global homeostasis of the microbiome. In addition, ruminococcin C1 exhibits other biological activities that could be beneficial for human health, as well as other fields of applications. Overall, this study, by using an in vivo infection approach, confirms the antimicrobial clinical potential and highlights the multiple functional properties of ruminococcin C1, thus extending its therapeutic interest.     

Solubility of Si3N4 in Liquid SiO2

The nitrogen solubility in the SiO₂-rich liquid in the metastable binary SiO₂-Si₃N₄ system has been determined by analytical TEM to be 1%–4% of N/(O + N) at 1973–2223 K. Analysis of the near edge structure of the electron energy loss peak indicates that nitrogen is incorporated into the silicate network rather than being present as molecular N₂. A regular solution model with a positive enthalpy of mixing for the liquid was used to match the data for the metastable solubility of N in the presence of crystalline Si₃N₄ and to adjust the computed phase diagram. The solubility of Si₃N₄ in fused SiO₂ is far less than reported in liquid silicates also containing Al, Mg, and/or Y. Apparently, these cations act as modifiers that break anion bridges in the silicate network and, thereby, allow further incorporation of Si₃N₄ without prohibitive amounts of network cross-linking. Finally, indications emerged regarding the diffuse nature of the Si₃N₄-SiO₂ interface that leads to amorphous regions of higher N content.     

Verifying anonymity in voting systems using CSP

We present formal definitions of anonymity properties for voting protocols using the process algebra CSP. We analyse a number of anonymity definitions, and give formal definitions for strong and weak anonymity, highlighting the difference between these definitions. We show that the strong anonymity definition is too strong for practical purposes; the weak anonymity definition, however, turns out to be ideal for analysing voting systems. Two case studies are presented to demonstrate the usefulness of the formal definitions: a conventional voting system, and Prêt à Voter, a paper-based, voter-verifiable scheme. In each case, we give a CSP model of the system, and analyse it against our anonymity definitions by specification checks using the Failures-Divergences Refinement (FDR2) model checker. We give a detailed discussion on the results from the analysis, emphasizing the assumptions that we made in our model as well as the challenges in modelling electronic voting systems using CSP.     

Silphinene Sesquiterpenes as Model Insect Antifeedants

Silphinene sesquiterpenes are established chrysomelid antifeedants. In this work, nine silphinene analogs, 11-acetoxy-5-angeloyloxysilphinen-3-one (1), 11-acetoxy-5-tigloyloxysilphinen-3-one (2), 11-acetoxy-5-iso- butyryloxysilphinen-3-one (3), 11-hydroxy-5-angeloyloxysilphinen-3-one (4), 11,5-dihydroxysilphinen-3-one (5), 11,5-diacetoxysilphinen-3-one (6), 5,11-diisobutyryloxysilphinen-3-one (7), silphinen-3,5,11-trione (8), and O-methyl-5-epicantabrenolic acid methyl ester (10), and a presilphiperfolane sesquiterpene (9) were tested against several divergent insect species, including the lepidopteran Spodoptera littoralis, the chrysomelid Leptinotarsa decemlineata, and five aphid species, and their antifeedant effects were compared with those of picrotoxinin, a GABA-antagonist, and thymol, an allosteric modulator for insect GABA receptors. All insects tested responded to at least one silphinene analog and/or GABA antagonist. Compound 3 and thymol were effective antifeedants against all species tested except S. littoralis, with varying potencies according to their feeding ecologies. The toxicity of these compounds was species-dependent and did not correlate with their antifeedant effect.     

Reactive Laser Ablation Synthesis of Nanosize Alumina Powder

An aluminum (Al) target was laser ablated in an oxygen (O₂) atmosphere, producing nanosize alumina (Al₂O₃) powder. The powder surface area decreased (and the particle size increased) with both increasing oxygen pressure and laser fluence. All powders produced had surface areas between 135 and 250 m²/g, corresponding to primary particle sizes ranging from 7 to 3 nm in radius. Phase evolution with temperature was studied via X-ray diffraction. These powders showed a direct transformation from γ- to α-alumina at approximately 1200°C, bypassing other transition alumina phases, while still maintaining small particle size ( 30 nm). Despite the nanosize particles, green densities equal to 54% of the skeletal density (i.e., true density of the solid phase) were obtained by uniaxial pressing at 40 MPa.     

Synthesis and electrochemical characteristics of Al2O3-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for lithium ion batteries

LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials have been coated with Al₂O₃ nano-particles using sol-gel processing to improve its electrochemical properties. The X-ray diffraction (XRD) pattern of the as-prepared Al₂O₃ nano-particles was indexed to the cubic structure of the γ-Al₂O₃ phase and had an average size of ∼4 nm. The XRD showed that the structure of LiNi_1/3Co_1/3Mn_1/3O₂ was not affected by the Al₂O₃ coating. However, the Al₂O₃ coatings on LiNi_1/3Co_1/3Mn_1/3O₂ improved the cyclic life performance and rate capability without decreasing its initial discharge capacity. These electrochemical properties were also compared with those of LiAlO₂-coated LiNi_1/3Co_1/3Mn_1/3O₂ cathode material. The electrochemical impedance spectroscopy (EIS) was studied to understand the enhanced electrochemical properties of the Al₂O₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ compared to uncoated LiNi_1/3Co_1/3Mn_1/3O₂.     

Reactive Laser Ablation Synthesis of Nanosize Aluminum Nitride

An aluminum (Al) target was laser ablated in a nitrogen (N₂) atmosphere, producing aluminum nitride (AlN) powder. These powders were calcined at 900°C for 2 h. Powders were produced at various nitrogen pressures, and the calcined powders were tested for unreacted aluminum content, using differential thermal analysis (DTA). The AlN powder, produced at a laser fluence of 12 J/cm² and a nitrogen pressure of 10.0 kPa (75 torr), showed no evidence of unreacted aluminum by DTA and was phase-pure AlN by X-ray diffraction (XRD). The surface area of this powder is 82 m²/g, corresponding to a particle size of ∼11 nm, which is in good agreement with TEM observations.     

Practical Significance,Theory and Determination of Compatibility of Dyes on Synthetic-polymer Fibres

The compatibility of dyes is particularly important in regard to the time, reproducibility and levelness of dyeing. For basic dyes on acrylic fibres and anionic dyes on nylon, a characteristic of the dye—the compatibility value K— is valuable in determining whether it can be used in the same bath as others. Dyes having the same K-value are compatible under most dyeing conditions. For disperse dyes, K-values do not exist. In selecting such dyes for use together, other properties of the dyes and the concentrations to be used in the particular combination must be considered.