Reaction kinetics modeling and thermal properties of epoxy–amines as measured by modulated‐temperature DSC. II. Network‐forming DGEBA + MDA

Reaction‐induced vitrification takes place in the network‐forming epoxy–amine system diglycidyl ether of bisphenol A (DGEBA) + methylenedianiline (MDA) when the glass‐transition temperature (T_g) rises above the cure temperature (T_cure). This chemorheological transition results in diffusion‐controlled reaction and can be followed simultaneously with the reaction rate in modulated‐temperature DSC (MTDSC). To predict the effect of T_cure and the NH/epoxy molar mixing ratio (r) on the reaction rate in chemically controlled conditions, a mechanistic approach was used based on the nonreversing heat flow and heat capacity MTDSC signals, in which the reaction steps of primary (E_1OH = 44 kJ mol^?1) and secondary amine (E_2OH = 48 kJ mol^?1) with the epoxy–hydroxyl complex predominating. The diffusion factor DF as defined by the Rabinowitch approach expresses whether the chemical reaction rate or the diffusion rate determines the overall reaction rate. A model based on the free volume theory together with an Arrhenius temperature dependency was used to calculate the diffusion rate constant in DF as a function of conversion (x) and T_cure. The relation between x, r, and T_g, needed in this model, can be predicted with the Couchman equation. An experimental approximation for DF is the mobility factor DF* obtained from the heat capacity signal at a modulation frequency of 1/60 Hz, normalized for the effect of the reaction heat capacity in the liquid state and the change in C_p in the glassy region with x and T_cure. In this way, an optimized set of diffusion parameters was obtained that, together with the optimized kinetic parameters set, can predict the reaction rate for different cure schedules and for stoichiometric and off‐stoichiometric mixtures. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2814–2833, 2004     

Volatile Emissions Triggered by Multiple Herbivore Damage: Beet Armyworm and Whitefly Feeding on Cotton Plants

Plants are commonly attacked by more than one species of herbivore, potentially causing the induction of multiple, and possibly competing, plant defense systems. In the present paper, we determined the interaction between feeding by the phloem feeder silverleaf whitefly (SWF), Bemisia tabaci Gennadius (B-biotype = B. argentifolii Bellows and Perring), and the leaf-chewing beet armyworm (BAW), Spodoptera exigua Hübner, with regard to the induction of volatile compounds from cotton plants. Compared to undamaged control plants, infestation with SWF did not induce volatile emissions or affect the number and density of pigment glands that store volatile and nonvolatile terpenoid compounds, whereas infestation by BAW strongly induced plant volatile emission. When challenged by the two insect herbivores simultaneously, volatile emission was significantly less than for plants infested with only BAW. Our results suggest that tritrophic level interactions between cotton, BAW, and natural enemies of BAW, that are known to be mediated by plant volatile emissions, may be perturbed by simultaneous infestation by SWF. Possible mechanisms by which the presence of whiteflies may attenuate volatile emissions from caterpillar-damaged cotton plants are discussed.     

Free fatty acid inhibition of the insulin induction of glucose-6-phosphate dehydrogenase in rat hepatocyte monolayers

Rat hepatocytes in monolayer culture were utilized to determine if the decrease in glucose-6-phosphate dehydrogenase (G6PD) activity resulting from the ingestion of fat can be mimicked by the addition of fatty acids to a chemically, hormonally defined medium. G6PD activity in cultured hepatocytes was induced several-fold by insulin. Dexamethasone or T3 did not amplify the insulin induction of G6PD. Glucose alone increased G6PD activity in cultured hepatocytes from fasted donors by nearly 500%. Insulin in combination with glucose induced G6PD an additional two-fold. The increase in G6PD activity caused by glucose was greater in hepatocytes isolated from 72 hr-fasted rats as compared to fed donor rats. Such a response was reminiscent of the “overshoot” phenomenon in which G6PD activity is induced well above the normal level by fasting-refeeding rats a high glucose diet. Addition of linoleate to the medium resulted in a significant suppression of insulin’s ability to induce G6PD, but linoleate had no effect on the induction of G6PD activity by glucose alone. A shift to the right in the insulin-response curve for the induction of G6PD also was detected for the induction of malic enzyme and acetyl-CoA carboxylase. Arachidonate (0.25 mM) was a significantly more effective inhibitor of the insulin action than linoleate was. Apparently rat hepatocytes in monolayer culture can be utilized as a model to investigate the molecular mechanism by which fatty acids inhibit the production of lipogenic enzymes. In part, this mechanism of fatty acid inhibition involves desensitization of hepatocytes to the lipogenic action of insulin.     

Bulk and interfacial physical properties of aqueous solutions of sodium lauryl sulphate and lauryl alcohol with air and benzene system: Part I: Aqueous solutions of sodium lauryl sulphate

Experimental measurements were made of the pH, density, bulk viscosity and electrical conductivity of aqueous solutions of sodium lauryl sulphate for a wide range of concentrations at 25°C. Also, the time-dependent interfacial tension data of this system with mutually saturated benzene phases are reported. Comparison of these data with literature values shows fair agreement in the majority of the cases and further reveals the lack of data in the earlier investigations below the critical micelle concentration of sodium lauryl sulphate in water. A detailed compilation of the data, reported in the literature since 1937, of the pH, density, bulk viscosity, electrical conductivity, surface tension, interfacial tension with benzene, surface excess concentration, surface shear viscosity, diffusivity and critical micelle concentration of the sodium lauryl sulphate system is given. The importance of this anionic surfactant system together with the various factors which influence the physical properties is examined.     

Sulfonated poly(ether ketone ketone) ionomers as proton exchange membranes

Sulfonated poly(ether ketone ketone) ionomers (SPEKK) with ion‐exchange capacities (IEC) between 0.2 and 3.4 meq/g were prepared by sulfonating PEKK with a mixture of concentrated and fuming sulfuric acids. Sulfonation occurs only on the phenyl rings attached to ether and ketone groups. The glass transition temperature of the dry SPEKK ionomers increased linearly with increasing IEC, and the ionomers were thermally stable to ～250°C, above which desulfonation occurred. Water‐swollen ionomers exhibited microphase separated morphologies, and the average correlation length determined by small angle X‐ray scattering increased with increasing IEC. The proton conductivity of hydrated SPEKK membranes measured by impedance spectroscopy ranged from ～10^–3 to 10^–1 S/cm as the IEC increased from ～1.0 to 2.4 meq/g. Single cell performance curves on membrane‐electrode assemblies (MEA) indicated that the SPEKK membranes approached the performance of Nafion? for an IEC of 2 meq/g. POLYM. ENG. SCI., 45:1081–1091, 2005. © 2005 Society of Plastics Engineers     

Preparation and Characterization of 17O-Enriched Alumina for Nuclear Fusion Damage Experiments

Alumina enriched in ¹⁷O was successfully fabricated from aluminum isopropoxide and water containing the ¹⁷O isotope. This material was necessary for an experiment to study the radiation damage expected in alumina exposed to a nuclear fusion reactor environment. The enrichment levels of specimens subjected to different preparation schedules were measured using a nuclear reaction analysis technique. Replacement of the ¹⁷O isotope in the ceramic by atmospheric oxygen occurred readily. Therefore, successful fabrication of suitably enriched alumina specimens required that all processing steps be performed under vacuum or inertgas environments. The optimum fabrication procedure produced enriched alumina specimens of >99.5% of theoretical density, ∽10-μm grain size, and a flexural strength of 280 MPa.     

Cation Transport at 25°C from Binary Cd2+–Mn+ Mixtures in a H2O-CHCl3–H2O Liquid Membrane System Containing a Series of Macrocyclic Carriers[1]

Macrocycle-mediated fluxes of Cd(NO₃)₂ and of several binary mixtures of Cd(NO₃)₂ with the nitrate salt of either Na⁺, K⁺, Rb⁺ Cs⁺, Ag⁺, Ca²⁺, Sr²⁺, Pb²⁺, Zn²⁺, or Cu²⁺ have been determined in a H₂O-CHCl₃–H₂O liquid membrane system. Of the macrocycles studied, 2.2 and 2.2DD most successfully transported Cd²⁺ In the Cd²⁺–Mⁿ⁺ mixtures, Cd²⁺ was transported selectively with 2.2 when Mⁿ⁺ was either an alkali or an alkaline earth cation. However, when Mⁿ⁺ was either Ag⁺, Pb²⁺, or Cu²⁺ the Cd²⁺ flux was reduced sharply. Generally, cation flux was greater for 2.2DD than for 2.2 with selectivity for Cd²⁺ being altered also in several cases. Relative fluxes from binary cation mixtures depend on metal cation radius, macrocycle cavity diameter, ligand ring substituent and log K for metal ion-macrocycle interaction.     

Prediction of Experimental Methanol Decomposition Rates on Platinum from First Principles

A microkinetic model for methanol decomposition on platinum is presented. The model incorporates competitive decomposition pathways, beginning with both O–H and C–H bond scission in methanol, and uses results from density functional theory (DFT) calculations [Greeley and Mavrikakis, J. Am. Chem. Soc. 124 (2002) 7193, Greeley and Mavrikakis, J. Am. Chem. Soc. 126 (2004) 3910]. Results from reaction kinetics experiments show that the rate of H₂ production increases with increasing temperature and methanol concentration in the feed and is only nominally affected by the presence of CO or H₂ with methanol. The model, based on the values of binding energies, pre-exponential factors and activation energy barriers derived from first principles calculations, accurately predicts experimental reaction rates and orders. The model also gives insight into the most favorable reaction pathway, the rate-limiting step, the apparent activation energy, coverages, and the effects of pressure. It is found that the pathway beginning with the C–H bond scission (CH₃OH→H₂COH→HCOH→CO) is dominant compared with the path beginning with O–H bond scission. The cleavage of the first C–H bond in methanol is the rate-controlling step. The surface is highly poisoned by CO, whereas COH appears to be a spectator species.     

Comparing techniques for authorship attribution of source code

Attributing authorship of documents with unknown creators has been studied extensively for natural language text such as essays and literature, but less so for non‐natural languages such as computer source code. Previous attempts at attributing authorship of source code can be categorised by two attributes: the software features used for the classification, either strings of n tokens/bytes (n‐grams) or software metrics; and the classification technique that exploits those features, either information retrieval ranking or machine learning. The results of existing studies, however, are not directly comparable as all use different test beds and evaluation methodologies, making it difficult to assess which approach is superior. This paper summarises all previous techniques to source code authorship attribution, implements feature sets that are motivated by the literature, and applies information retrieval ranking methods or machine classifiers for each approach. Importantly, all approaches are tested on identical collections from varying programming languages and author types. Our conclusions are as follows: (i) ranking and machine classifier approaches are around 90% and 85% accurate, respectively, for a one‐in‐10 classification problem; (ii) the byte‐level n‐gram approach is best used with different parameters to those previously published; (iii) neural networks and support vector machines were found to be the most accurate machine classifiers of the eight evaluated; (iv) use of n‐gram features in combination with machine classifiers shows promise, but there are scalability problems that still must be overcome; and (v) approaches based on information retrieval techniques are currently more accurate than approaches based on machine learning. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface plasmon resonance evaluation of various aminoglycoside-RNA hairpin interactions reveals low degree of selectivity

Aminoglycoside antibiotics, which are able to selectively bind to RNA, are considered to be an important lead in RNA-targeting drug discovery. In this study, surface plasmon resonance (SPR) was employed to explore the interaction of aminoglycosides with known tobramycin-binding RNA hairpins (aptamers) and an unrelated RNA hairpin. It was established that aminoglycosides have multiple interactions with RNA hairpins. Unexpectedly, the different hairpins showed comparable affinity for a set of related aminoglycosides. The observed absence of selectivity presents an extra hurdle in the discovery of novel aminoglycosides as specific drugs that target defined RNA hairpins.