Tough thermosetting polyurethanes and adhesives from rubber seed oil by hydroformylation

Rubber seed oil (RSO), extracted from the seeds of rubber trees, is inedible oil with high free fatty acid content. In order to add value to RSO, we prepared a polyol with primary OH groups via hydroformylation/hydrogenation. Free hydroxy fatty acids formed in the process were utilized as reactive diluents, viscosity reducers, and adhesion promoters through hydrogen bonding with the substrate. The structures of the oil and polyol were analyzed using a range of analytical methods. The polyol had a hydroxyl number of 244 mg KOH g⁻¹ and an acid number of 21 mg KOH g⁻¹. The polyurethane prepared from this polyol and diphenylmethane diisocyanate was a highly crosslinked, tough material with a glass transition at 44 °C, high tensile strength and elongation, and attractive electrical properties. When used as a wood adhesive, it displayed extraordinary shear strength characterized by substrate wood failure rather than cohesive failure of the polymer. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48509.     

Novel,Dual Target-Directed Annelated Xanthine Derivatives Acting on Adenosine Receptors and Monoamine Oxidase B

Annelated purinedione derivatives have been shown to act as possible multiple-target ligands, addressing adenosine receptors and monoaminooxidases. In this study, based on our previous results, novel annelated pyrimido- and diazepino[2,1-f]purinedione derivatives were designed as dual-target-directed ligands combining A_2A adenosine receptor (AR) antagonistic activity with blocking monoamine oxidase B. A library of 19 novel compounds was synthesized and biologically evaluated in radioligand binding studies at AR subtypes and for their ability to inhibit MAO-B. This allowed 9-(2-chloro-6-fluorobenzyl)-3-ethyl-1-methyl-6,7,8,9-tetrahydropyrimido[2,1-f]purine-2,4(1H,3H)-dione ( 13 e ; K_i human A_2AAR: 264 nM and IC₅₀ human MAO-B: 243 nM) to be identified as the most potent dual-acting ligand from this series. ADMET parameters were estimated in vitro, and analysis of the structure-activity relationships was complemented by molecular-docking studies based on previously published X-ray structures of the protein targets. Such dual-acting ligands, by selectively blocking A_2A AR, accompanied by the inhibition of dopamine metabolizing enzyme MAO-B, might provide symptomatic and neuroprotective effects in, among others, the treatment of Parkinson disease     

Synthesis of starch benzoate in aqueous media

Summary The results of investigating starch benzoate (SB) synthesis in aqueous media are presented in this study. Starch esterification with benzoyl chloride was performed in two steps, the first step being the alkalization of starch and the second step esterification. The influence of the concentration of reactants, reaction medium composition, temperature and time of synthesis on the degree of substitution (DS), degree of swelling in water and thermal stability of the synthesized starch benzoate was investigated. The optimal conditions for the synthesis of starch benzoate with degree of substitution from 0.23 to 1.76 were determined. It was shown that starch benzoate with a DS of 1.76 practically did not swell in water. However, starch benzoate is less thermally stable than native starch probably due to a change in the supermolecular order induced by the esterification reaction. Received: 18 March 2002/Revised version: 18 October 2002/ Accepted: 28 October 2002 Correspondence to Katarina Jeremić     

Crosslinked blends of poly(lactic acid) and polyacrylates: AFM, DSC and XRD studies

The blends based on poly(lactic acid), (PLA) and polyacrylates (1:1 weight ratio) have been prepared by photopolymerization of three different multifunctional acrylate monomers (pentaerythritol triacrylate, pentaerythritol tetraacrylate and dipentaerythritol pentaacrylate) in matrix of linear PLA. The structure of these systems has been studied by Atomic Force Microscopy (AFM), Differential Scanning Calorimetry (DSC) and X-ray Diffraction (XRD). It was found that the blends are highly crosslinked, rough, heterogeneous and some of them – semicrystalline. The effect of UV-irradiation on surface morphology of obtained mixtures was studied. The viscometry has been applied for measurements of changes of PLA molecular weight resulting of photodegradation. It was shown that blends are much more photostable than pure PLA.     

Enhanced stability in CO2 of Ta doped BaCe0.9Y0.1O3−δ electrolyte for intermediate temperature SOFCs

The influence of Ta concentration on the stability of BaCe_0.9−xTa_xY_0.1O_3−δ (where x=0.01, 0.03 and 0.05) powders and sintered samples in CO₂, their microstructure and electrical properties were investigated. The ceramic powders were synthesized by the method of solid state reaction, uniaxially pressed and sintered at 1550 °C to form dense electrolyte pellets. A significant stability in CO₂ indicated by the X-ray analysis performed was observed for the samples with x≥0.03. The electrical conductivities determined by impedance measurements in the temperature range of 550–750 °C and in various atmospheres (dry argon, wet argon and wet hydrogen) increased with temperature but decreased with Ta concentration. The highest conductivities were observed in the wet hydrogen atmosphere, followed by those in wet argon, while the lowest were obtained in the dry argon atmosphere for each dopant concentration. The composition with Ta content of 3 mol% showed satisfactory characteristics: good resistance to CO₂ in extreme testing conditions, while a somewhat reduced electrical conductivity is still comparable with that of BaCe_0.9Y_0.1O_3−δ.     

Jacobi and Gauss-Seidel Iterations for Polytopic Systems: Convergence via Convex M-Matrices

A natural generalization of the Jacobi and Gauss-Seidel iterations for interval systems is to allow the matrices to reside in convex polytopes. In order to apply the standard convergence criteria involving M-matrices to iterations for polytopic systems, we derive conditions for a convex polytope of matrices to be a polytope of M-matrices in terms of its vertices. We show the conditions are used in the convergence analysis of iterations for block and nonlinear polytopic systems.     

Non-oscillatory damped multi-degree-of-freedom systems

Summary An analysis of the conditions under which a symmetric damped linear system does not oscillate is presented. A necessary and sufficient condition is formulated in terms of the definiteness of a Hankel's matrix whose elements depend on the coefficients of the characteristic polynomial of the system. From a practical point of view it is of interest to find conditions which are related in a simple way to the properties of the system matrices. Such previously developed criteria are indicated and compared, and a new sufficient condition for non-oscillation is derived. Results obtained for symmetric systems are then generalized to asymmetric and symmetrizable systems. Several examples are used to illustrate the validity and application of the presented criteria.     

Comparative study of commercially available cocoa products in terms of their bioactive composition

Recent trends in food marketing suggest that cocoa products, besides being favourite sweets among consumers, also present multiple-benefit foodstuffs, which are becoming objects of increased scientific research, mainly because of their interesting phytochemical composition. UV/VIS spectrophotometric and high-performance liquid chromatography (HPLC-PDA) methods were applied in order to compare the composition of polyphenols and methylxanthines in commercial cocoa products affected by different extraction solvents. Antioxidant capacity of water and methanol extracts was evaluated using DPPH (2,2-diphenyl-1-picrylhydrazyl), ABTS (2,2-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) and FRAP (ferric reducing/antioxidant power) assays. The obtained results confirmed that the content of polyphenols and methylxanthines, as well as the antioxidant capacity of cocoa products depend on the content of their cocoa solids. Among the tested cocoa products, the highest content of bioactive compounds (polyphenols and methylxanthines) was determined in extracts of cocoa products with the highest content of cocoa solids (cocoa liquor, cocoa powder and dark chocolate with 88% cocoa solids), while the lowest content was determined in milk chocolate and cocoa bar extracts. The most abundant phenolic compound in cocoa extracts was (?)-epicatechin, while the most abundant methylxanthine was theobromine. In comparison with water, 70% methanol demonstrated higher efficiency for the extraction of the studied bioactive compounds from cocoa products.     

Electrochemical activation of the electroless deposition of Ni–P alloy and phase structure characterization of the deposit. Part I: Dual bath system

A typical low temperature alkaline bath was chosen for the investigation of the effect of electrochemical activation on the efficiency of the electroless deposition of Ni and on the phase structure of the Ni–P alloys obtained. Electrochemical deposition was separated from chemical deposition by employing a two bath sequence, the first (i.e., the bath for electrochemical activation) being free of reducing agent. It was found that an activation current density, as well as an amount of precursors at the surface larger than a critical value (0.5mA cm^–2 and 8 mC cm^–2, respectively) are required for the electroless process to take place. The phenomenon was explained in terms of nucleation theory. Anodic linear sweep voltammetry (ALSV) of the Ni–P alloys obtained after electrochemical activation, as well as of those obtained after chemical (Sn–Pd) activation, indicated the presence of two dominant phases, that is, a solid solution of P in Ni, and a nickel phosphide compound, most probably Ni2P. It was also shown that changes in the phase structure of the electroless Ni–P deposit upon thermal treatment may be followed by employing (ALSV).