Novel model reference adaptive control architecture using semi‐initial excitation‐based switched parameter estimator

This paper is a generalization of the recently developed techniques of initial excitation (IE)–based adaptive control with an introduction to the definition of semi‐initial excitation (semi‐IE), a still more relaxed notion than IE. Classical adaptive controllers typically ensure Lyapunov stability of the extended error dynamics (tracking error + parameter estimation error) and asymptotic tracking, while requiring a stringent condition of persistence of excitation (PE) for parameter convergence. Of late, the authors have proposed a new adaptive control architecture, which guarantees parameter convergence under the online‐verifiable IE condition leading to exponential stability of the extended error dynamics. In earlier works, it has been established that the IE condition is significantly milder than the classical PE condition. The current work further slackens the excitation condition by proposing the concept of semi‐IE. The proposed adaptive controller is proved to ensure convergence of the parameter estimation error to a lower‐dimensional manifold under the weaker semi‐IE condition, while the stronger condition of IE guarantees convergence of the parameter estimation error to zero. The designed algorithm is shown to improve transient response of tracking error sufficiently in contrast to conventional adaptive controllers.     

Radial Sub-band Allocation with Downlink Interference Mitigation in Macro–Femto Environment

Wireless Personal Communications - Femtocell deployment is an important strategy when it comes to improvement of QoS metrics in areas of poor cell coverage like indoors in an LTE environment. This,...     

A low-overhead and reliable switch architecture for Network-on-Chips

This paper proposes and evaluates Low-overhead, Reliable Switch (LRS) architecture to enhance the reliability of Network-on-Chips (NoCs). The proposed switch architecture exploits information and hardware redundancies to eliminate retransmission of faulty flits. The LRS architecture creates a redundant copy of each newly received flit and stores the redundant flit in a duplicated flit buffer that is associated with the incoming channel of the flit. Flit buffers in the LRS are equipped with information redundancy to detect probable bit flip errors. When an error is detected in a flit buffer, its duplicated buffer is used to recover the correct value of the flit. In this way, the propagation of the erroneous flits in NoC is prevented without any need to credit signals and, retransmission buffers. Using an HDL-based NoC simulator, the LRS is compared to two other widely used reliability enhancement methods: the Switch-to-Switch (S2S) and the End-to-End (E2E) methods. The simulation results show that the LRS consumes less power and provides higher performance compared to those of the E2E and S2S methods. More importantly, unlike the E2E and the S2S methods, the LRS has constant overheads, which makes it applicable in all working conditions. To validate the comparison, an analytical performance and reliability model is developed for the LRS, S2S and E2E methods. The results of the model match those obtained from the simulations while the proposed model is significantly faster.     

What do we want specifically from the cell phone? An age related study

This study investigated the evolution of specific cell phone feature preferences among high school, undergraduate and graduate college students in Finland. Following the relevant literature review, the paper analyzed the responses of 118 high school, 268 undergraduate and 84 graduate students from educational institutions located in the metropolitan area of Tampere, Finland. The results indicate that the students in Finland appreciate the specific feature “clock”, “phone”, “high battery life”, “alarm”, and “calendar” as very important, and the specific features “TV connectivity”, “joystick”, “live TV”, “Twitter”, and “small screen size” as unimportant features. There were also significant differences in the specific feature preferences between the students between high school, undergraduate and graduate students. In addition there were differences in the way the respondents conceptualize the specific feature preferences of the cell phone. The paper concludes with a discussion regarding the academic and managerial implications.     

Distributed channel selection in CRAHNs: A non-selfish scheme for mitigating spectrum fragmentation

In this paper, we consider the problem of spectrum sharing in CRAHNs and propose a distributed channel selection scheme. The key functionality of our proposal, best-fit channel selection (BFC) is that it accounts both the primary channel traffic activity and CR traffic activity in channel selection. We assume CR nodes have the capability of estimating the primary channel traffic activities. In BFC, each CR selects a channel among the primary user (PU) channels for transmission that best fits to its transmission time requirement. We compare the performance of BFC to the widely known longest idle time channel selection (LITC) scheme. In LITC, a CR selects the channel that has the longest expected idle time independent of its transmission needs. In a multi-user CRN, this may degrade the network performance compared to the non-selfish BFC approach. LITC is considered selfish since each CR aims to maximize its own benefit and thus wastes resources that may be utilized by other nodes in the network. BFC providing an efficient spectrum sharing mechanism implicitly mitigates the effect of spectrum fragmentation which is a significant issue degrading the CR spectrum utilization. In CRNs, spectrum may be fragmented in various dimensions, e.g. time and frequency, such that some parts of the spectrum can not be used although being idle. Our proposal provides a solution to the spectrum fragmentation issue in time dimension at the medium access control (MAC) layer. By a set of simulations, we highlight the performance improvement by BFC over the conventional LITC under various CR/PU traffic, number of CRs, estimation accuracy and buffering capability. Simulation results show that the performance of the proposed BFC is significantly superior to that of LITC in terms of probability of successful transmission, spectrum opportunity utilization and fragmentation.     

InRout - A QoS aware route selection algorithm for industrial wireless sensor networks

Wireless sensor networks are a key enabling technology for industrial monitoring applications where the use of wireless infrastructure allows high adaptivity and low cost in terms of installation and retrofitting. To facilitate the move from the current wired designs to wireless designs, concerns regarding reliability must be satisfied. Current standardization efforts for industrial wireless systems lack specification on efficient routing protocols that mitigate reliability concerns. Consequently, this work presents the InRout route selection algorithm, where local information is shared among neighbouring nodes to enable efficient, distributed route selection while satisfying industrial application requirements and considering sensor node resource limitations. Route selection is described as a multi-armed bandit task and uses Q-learning techniques to obtain the best available solution with low overhead. A performance comparison with existing approaches demonstrates the benefits of the InRout algorithm, which satisfies typical quality of service requirements for industrial monitoring applications while considering sensor node resources. Simulation results show that InRout can provide gains ranging from 4% to 60% in the number of successfully delivered packets when compared to current approaches with much lower control overhead.     

SPARC deficiency leads to early-onset cataractogenesis

PURPOSE: To determine the role of SPARC (secreted protein, acidic, and rich in cysteine) in cataractogenesis by examining mice deficient in a matricellular protein SPARC. METHODS: Mice were rendered SPARC-deficient by a targeted disruption of the gene. Slit-lamp microscopy and histology were used to examine the eyes of SPARC-null and wild-type mice from birth to 14 months of age. RESULTS: SPARC-null mice developed opacities in the posterior cortex of the eye as early as 1.5 months after birth. The diffuse cataracts appeared to progress toward the anterior cortex and reached maturity in many animals by 3.5 months of age. Early stages of cataractogenesis in SPARC-null mice included inhibition of normal lens fiber cell differentiation, degeneration of fiber cells, vacuole formation at the equator, and liquefaction of the cortex. No cataracts were detected in wild-type mice up to the age of 8 months. CONCLUSIONS: The early onset of cataracts in SPARC-null mice establishes that the gene is essential to the maintenance of lens transparency.     

BUSINESS DIRECTIONS AND MATERIALS CHALLENGES FOR THE AIRCRAFT ENGINE INDUSTRY

ＢＵＳＩＮＥＳＳＤＩＲＥＣＴＩＯＮＳＡＮＤＭＡＴＥＲＩＡＬＳＣＨＡＬＬＥＮＧＥＳＦＯＲＴＨＥＡＩＲＣＲＡＦＴＥＮＧＩＮＥＩＮＤＵＳＴＲＹＪ．Ｃ．Ｗｉｌｌｉａｍｓ（ＧＥＡｉｒｃｒａｆｔＥｎｇｉｎｅｓ,Ｃｉｎｃｉｎｎａｔｉ,ＯＨ４５２１５－６３０１,ＵＳ...     

Experimental,equilibrium modelling,and column design for the reactive separation of biomass-derived 2-furoic acid

Electrochemical conversion of biomass to value-added chemicals has gained impetus in recent years. Herein, we present a methodology for recovering biomass-derived 2-furoic acid from the dilute aqueous stream by reactive extraction. The reactive extraction was performed using a chemical extractant, trioctylamine (TOA), with diluents (octanol, chloroform, and diethyl ether). Equilibrium parameters influencing the recovery of 2-furoic acid were evaluated. Using TOA in various diluents, the 2-furoic acid was recovered with 85%–99% efficiency. A 1:1 complex of the 2-furoic acid—TOA was formed in the organic phase, and the experimental equilibrium complexation constant was compared with that obtained from the relative basicity and Langmuir models. The equilibrium parameters were used for column design to estimate the solvent to feed ratio (S/F) and the number of theoretical stages (NTS). The NTS required is 12 to attain 99% recovery of 2-furoic acid in counter-current extraction. The present study sheds light on the reactive extraction process adopted for process intensification with electrochemical conversion, paving the way for the commercialization of valuable products obtained from biomass.     

Studies of mechanical and moisture regain properties of methyl methacrylate grafted silk fibers

The mechanical properties such as the tenacity, breaking extension, initial modulus, elastic and work recovery, and stress relaxation behavior of methyl methacrylate (MMA) grafted silk fibers prepared under different conditions were measured and explained in terms of the relative dominance of the stress concentration, reduction in the interchain cohesion, and fiber matrix stiffening at different grafting percentages. The moisture regain characteristics of fibers grafted in the presence of different solvents were also studied and compared. The grafting of MMA on silk was found to improve the recovery properties significantly without affecting the stress relaxation behavior. The moisture regain studies indicate that moisture regain is reduced with increasing length of the grafted poly(MMA) chains. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 969–974, 2002; DOI 10.1002/app.10202