Structural and luminescence properties of RE (RE = Eu, Tb):(MgCa)2Bi4Ti5O20 ceramics

Rare-earth ions (Eu³⁺, Tb³⁺) activated magnesium calcium bismuth titanate [(MgCa)₂Bi₄Ti₅O₂₀] ceramics were prepared by conventional solid state reaction method for their structural and luminescence properties. By using XRD patterns, the structural properties of ceramic powders have been analyzed. Emission spectrum of Eu³⁺:(MgCa)₂Bi₄Ti₅O₂₀ ceramic powder has shown strong red emission at 615 nm (⁵D₀ → ⁷F₂) with an excitation wavelength λ_exci = 393 nm and Tb³⁺:(MgCa)₂Bi₄Ti₅O₂₀ ceramic powder has shown green emission at 542 nm (⁵D₄ → ⁷F₅) with an excitation wavelength λ_exci = 376 nm. In addition, from the measurements of scanning electron microscopy (SEM), Fourier transform-infrared (FTIR) and energy dispersive X-ray analysis (EDAX) results the morphology, structure and elemental analysis of these powder ceramics have been studied.     

Miscibility studies of sodium carboxymethylcellulose/poly(vinyl alcohol) blend membranes for pervaporation dehydration of isopropyl alcohol

Miscibility studies of sodium carboxymethylcellulose/poly(vinyl alcohol) (NaCMC/PVA) blends of different compositions (100/0, 80 : 20, 60 : 40, 50 : 50, 40 : 60, 20 : 80, and 0 : 100) were investigated using viscometric method. NaCMC, PVA, and their blend membranes were prepared by solution‐casting technique and were then crosslinked with glutaraldehyde (GA). The effect of blend composition on mechanical, swelling, and pervaporation results (flux and selectivity) was also investigated in this study. Attenuated total reflectance–Fourier transform infrared spectroscopy (ATR–FTIR) results showed that the blends are miscible over the entire studied composition range and further confirmed the crosslinking reaction with GA. FTIR studies reveal that the blends containing 50 : 50 (NaCMC/PVA) are an optimum miscible blend. Thermogravimetric analysis confirms that the thermal stability increased with increase in NaCMC content in NaCMC/PVA blend membrane. XRD and DSC showed a corresponding decrease in crystallinity and increase in melting point with increase in NACMC content, respectively. NaCMC/PVA blends of all the composition under study were used for dehydration of isopropyl alcohol at different compositions of IPA/water mixture (90 : 10, 87.5 : 12.5, 85 : 15, and 82.5 : 17.5) at 35°C. Swelling studies and PV results reveal that increase in NaCMC content in the blend leads to an increase in flux of water, whereas selectivity decreases. The optimum flux and selectivity were observed for the blend containing 50 : 50 NaCMC/PVA content at a feed ratio of 87.5 : 12.5 IPA/water. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation and characterization of 4A zeolite‐filled mixed matrix membranes for pervaporation dehydration of isopropyl alcohol

Sodium carboxymethylcellulose/poly (vinyl alcohol) mixed matrix membranes filled with different amounts 4A zeolite (0, 5, 10, 15, and 20 wt %) were prepared by solution casting method. Prepared membranes were crosslinked with GA and used for pervaporation dehydration of isopropyl alcohol of different feed mixtures at 35°C. On increment in zeolite content in the membrane it was found the improvement in the performance of the membrane, due to its hydrophilic nature and molecular sieving effect in addition to its favorable interaction with hydrophilic sodium carboxymethylcellulose and polyvinyl alcohol. The structure and chemical constituents of the MMM's were investigated by attenuated total reflectance Fourier transform infrared spectroscopy. Thermal stability of the membranes was assessed by DSC and TGA techniques. Crystallinity of the membranes was assessed using X‐ray diffraction, and the morphological properties were assessed by scanning electron microscopy. Mechanical properties were also carried out to determine the tensile strength and % of elongation at break using universal testing machine. It was found that the mechanical strength increases with increase in the zeolite content upto 15 wt % of zeolite with an optimum tensile strength of 113.31 N/mm². Pervaporation was carried out to asses the membrane performance, the highest flux and selectivity obtained is 0.584 kg/m²/h and 6945 for NaCMCA20 and NaCMCA15, respectively, for a feed composition containing 17.5 and 10 wt % of water in the feed and further swelling studies also supporting the pervaporation results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Pervaporation separation of IPA‐water mixtures through 4A zeolite‐filled sodium alginate membranes

Incorporation of zeolites into natural polymers has been shown experimentally to enhance both the flux and selectivity in pervaporative dehydration separation of organic compounds. Pervaporation is a promising membrane technique for separation of volatile organic compounds (VOCs)/water mixtures. In this study, hydrophilic sodium alginate (SA) mixed membranes were prepared using solution casting technique by incorporating zeolites into the polymer matrix. The prepared membranes were characterized by ATR‐Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), scanning electron microscopy (SEM), Thermal Gravimetric Analysis (TGA), and differential scanning calorimetry (DSC) were tested in a laboratory scale pervaporation experimental set‐up. The effect of experimental parameters such as the type and composition of zeolites on permeation flux and selectivity was investigated. When tested on IPA‐water mixtures, the zeolite‐filled membrane was found to give much higher selectivity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

Design,Synthesis, and Self-Assembly Studies of a Suite of Monodisperse,Facially Amphiphilic,Protein–Dendron Conjugates

The custom design of protein–dendron amphiphilic macromolecules is at the forefront of macromolecular engineering. Macromolecules with this architecture are very interesting because of their ability to self-assemble into various biomimetic nanoscopic structures. However, to date, there are no reports on this concept due to technical challenges associated with the chemical synthesis. Towards that end, herein, a new chemical methodology for the modular synthesis of a suite of monodisperse, facially amphiphilic, protein–dendron bioconjugates is reported. Benzyl ether dendrons of different generations (G1–G4) are coupled to monodisperse cetyl ethylene glycol to form macromolecular amphiphilic activity-based probes (AABPs) with a single protein reactive functionality. Micelle-assisted protein labeling technology is utilized for site-specific conjugation of macromolecular AABPs to globular proteins to make monodisperse, facially amphiphilic, protein–dendron bioconjugates. These biohybrid conjugates have the ability to self-assemble into supramolecular protein nanoassemblies. Self-assembly is primarily mediated by strong hydrophobic interactions of the benzyl ether dendron domain. The size, surface charge, and oligomeric state of protein nanoassemblies could be systematically tuned by choosing an appropriate dendron or protein of interest. This chemical method discloses a new way to custom-make monodisperse, facially amphiphilic, protein–dendron bioconjugates.     

Fabrication of ZnO-functionalized polypyrrole microcomposite as a protective coating to enhance anticorrosion performance of low carbon mild steel

In the present work, PPy, ZnO, and polypyrrole/zinc oxide (PPy/ZnO) microcomposites (1, 2, and 5 wt%) were prepared and their properties have been tuned for anticorrosion applications on low carbon mild steel. The synthesized products: ZnO, PPy, and composites were characterized by various sophisticated analytical techniques such as XRD, FTIR, Raman, FESEM, EDX, UV–VIS, TGA, and BET. The band frequencies observed at 480 and 588 cm⁻¹ in FTIR spectrum correspond to stretching vibrations of Zn-O and N-H bonds, respectively, broadening of the bands in the composites indicate strong interactions between ZnO and PPy matrix. The potentiodynamic polarization study of PPy and PPy/ZnO composite was carried out in 3.5% NaCl solution to investigate the corrosion resistance efficiency. PPy/1 wt% ZnO (I_corr = 190 nA) composite coating on low carbon mild steel was observed to exhibit best corrosion protection property compared to PPy (121 μA), 2 and 5 wt% ZnO (242, 295 nA) composites. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48319.     

Enhancement of properties of recycled coarse aggregate concrete using bacteria

Due to rapid construction, necessity for raw materials of concrete, especially coarse aggregate, tends to increase the danger of early exhaustion of the natural resources. An alternative source of raw materials would perhaps delay the advent of this early exhaustion. Recycled coarse aggregate (RCA) plays a great role as an alternative raw material that can replace the natural coarse aggregate (NCA) for concrete. Previous studies show that the properties of RCA concrete are inferior in quality compared to NCA concrete. This article attempts to study the improvement of properties of RCA concrete with the addition of bacteria named as Bacillus subtilis. The experimental investigation was carried out to evaluate the improvement of the compressive strength, capillary water absorption, and drying shrinkage of RCA concrete incorporating bacteria. The compressive strength of RCA concrete is found to be increased by about 20% when the cell concentration of B. subtilis is 10⁶ cells/ml. The capillary water absorption as well as drying shrinkage of RCA are reduced when bacteria is incorporated. The improvement of RCA concrete is confirmed to be due to the calcium carbonate precipitation as observed from the microstructure studies carried out on it such as EDX, SEM, and XRD.     

Isoflavone content among maturity group 0 to II soybeans

This study reports the isoflavone contents of 210 soybean cultivars grown in South Dakota and explores possible relations between isoflavone contents and agronomic characteristics. Total isoflavone contents (normalized) ranged from 1161 to 2743 μg/g. A number of agronomic characteristics were documented for each variety including maturity group, hilum color, disease resistance, seed weight, yield, maturity (in days), and plant height. Varieties in maturity group I had significantly higher total isoflavones when compared to maturity group 0. Hilum color was related to differences in genistin, daidzein, and genistein content. No differences in isoflavone content were observed based on disease resistance profiles. Genistein content was found to be negatively correlated with yield, days of maturity, and plant height. Weak but significant correlations also existed between these agronomic characteristics and other isoflavones.