In this letter, we examined whether the parasitic bipolar junction transistors (BJTs) in the MOSFET fabricated by the standard CMOS process can play a role as a fluorescence detector. To suppress the action of two vertical parasitic BJTs, the gate and n-well were tied in the parasitic BJTs, and the body node was connected to the drain. The proposed device was compared with the inherent and the parasitic diodes in the MOSFET. It had 100 times higher photocurrents than the diodes in the MOSFET. In addition, it was applied for the detection of the fluorescent signal, and could detect near 10 nM of Alexa 546. Therefore, CMOS-process-compatible parasitic BJTs can be used as a photodetector in an integrated fluorescence detector. 相似文献
Understanding information sharing is an important challenge to modern organizations, and is likely to be increasingly considered when IT investment decisions are made world-wide. Our research study investigated the influence of cultural factors on information sharing in China. It was postulated that social network structures such as guanxi, Confucian dynamism, and collectivism could explain the degree to which information sharing took place between people in China. It was found that guanxi, Confucian dynamism, and collectivism all had a significant influence on information sharing. 相似文献
A screening test was undertaken to isolate a microorganism that produced 5-oxoprolinase (without ATP-hydrolyzing). The 5-oxoprolinase (without ATP-hydrolyzing) activity (decyclization activity toward L-pyroglutamate) was found in a cell-free extract of Alcaligenes faecalis N-38A, newly isolated from a soil sample. The enzyme was purified as a homogeneous preparation. The molecular weight of the enzyme was estimated to be 47,000. The decyclization activity was specific for L-pyroglutamate, and independent of ATP and metal ions. The reaction was a reversible one, i.e., cyclization reaction of L-glutamate to yield pyroglutamate was identified. 相似文献
Poly(A)+ mRNA was isolated from leaves of potato plants (Solanum tuberosum L. cv. Desiree) according to standard protocols. This poly(A)+ mRNA was injected via glass microcapillaries into oocytes that were surgically removed from the African clawed toad Xenopus laevis. As a control, oocytes were either injected with H2O or remained untreated. Three days after injection the oocytes were analyzed by two electrode voltage clamping. Current voltage analysis revealed that a K+ channel from potato was functionally expressed in injected oocytes. The identity of this K+ channel was confirmed by its substrate specificity and a shift in the reversal potential. In particular, when the outside K+ concentration was increased the reversal potential of poly(A)+ injected oocytes shifted to more positive values. Furthermore, K+ outward currents declined when the outside K+ concentration was raised from 0.1 to 100 mM. Inward currents increased with an elevation of the K+ concentration. Several pharmaceuticals were tested for their potential to block this K+ channel. As a result, the channel was completely blocked by BaCl2. A three state reaction kinetic model was used to simulate the currents through the K+ transport protein as function of the extracellular K+ concentration. In particular, the simulation revealed current voltage relations that exactly matched the measured ones. Saturation of current voltage curves emerged from the simulation as a consequence of high extracellular potassium concentration. 相似文献
The paper proposes a novel metaheuristic based on integrating chaotic maps into a Henry gas solubility optimization algorithm (HGSO). The new algorithm is named chaotic Henry gas solubility optimization (CHGSO). The hybridization is aimed at enhancement of the convergence rate of the original Henry gas solubility optimizer for solving real-life engineering optimization problems. This hybridization provides a problem-independent optimization algorithm. The CHGSO performance is evaluated using various conventional constrained optimization problems, e.g., a welded beam problem and a cantilever beam problem. The performance of the CHGSO is investigated using both the manufacturing and diaphragm spring design problems taken from the automotive industry. The results obtained from using CHGSO for solving the various constrained test problems are compared with a number of established and newly invented metaheuristics, including an artificial bee colony algorithm, an ant colony algorithm, a cuckoo search algorithm, a salp swarm optimization algorithm, a grasshopper optimization algorithm, a mine blast algorithm, an ant lion optimizer, a gravitational search algorithm, a multi-verse optimizer, a Harris hawks optimization algorithm, and the original Henry gas solubility optimization algorithm. The results indicate that with selecting an appropriate chaotic map, the CHGSO is a robust optimization approach for obtaining the optimal variables in mechanical design and manufacturing optimization problems.
Microsystem Technologies - In this research a biologically inspired finger-like mechanism similar to human musculoskeletal system is developed based on Shape Memory Alloys (SMAs). SMA actuators are... 相似文献
In stereoscopic images, the crossing point of the viewing directions of the two eyes determines the perceived depth. Assuming that accommodation is affected by the positions of the crossing point, the effect of crossing point on minimum angle of resolution (MAR) was investigated. For 40 participants, MAR was measured by two‐alternative forced choice where Snellen optotype E of up and down directions were used as two kinds of stimuli. As the crossing point of the viewing direction of the left and right eyes moves farther from the sample display, the ability to identify the direction of letter E decreases at the optotype of the same line thickness. The change of MAR shows linear trends with respect to the optical power change that are the reciprocal of the distance from the participant to the crossing points located out of screen and on screen. 相似文献
The interfacial reaction between styrene/maleic anhydride copolymer (SMA) and amine-terminated butadiene-acrylonitrile copolymer (ATBA) was observed using Fourier transform infrared (FTIR) imaging spectroscopy. The anhydride and amine reacted to form an imide. Each component was detected using a characteristic wavenumber, which was 1601 cm -1 for SMA, 2237 cm -1 for ATBA, and 1701 cm -1 for the imide. FTIR images were taken as the reaction proceeded at 150, 160, 170, and 180°C. At low temperatures (150 and 160°C), diffusion-controlled kinetics were observed since interdiffusion between the reactants did not appear in the images. On the other hand, both the diffusion front and the reaction front are observed in the images at high reaction temperatures (170 and 180°C), which indicates that the kinetics became reaction-controlled rather than diffusion-controlled. Absorbance profiles were extracted from the images and used for the calculation of the extent of reaction. The data were analyzed using the Frederickson and Milner theory based on the assumption of diffusion-controlled kinetics, and this theory fit the low reaction temperature data. 相似文献
Continuous solution copolymerization of methyl methacrylate with ethyl methacrylate or n-butyl methacrylate was carried out
in a continuous stirred tank reactor. Solvent and initiator used were toluene and benzoyl peroxide, respectively. Reaction
volume was 1.2 litters, residence time 3 hours and polymerization temperature 80°C. The copolymerization conversions were
analyzed by UV spectrophotometry and confirmed by measuring the solid weights of copolymers obtained after evaporating solvent.
The copolymerization of methyl methacrylate and alkyl methacrylates followed the second order kinetics. The simulated conversions
and copolymerization rates were compared with the experimental results. The average time to reach dynamic steady-state was
three and half times of the residence time. 相似文献
The irreversible deformation mechanisms of poly(vinyl chloride) with a semicircular notch under slow tensile loading have been studied as a function of sheet thickness. Initially, core yielding was observed in the optical microscope as two families of slip lines growing from the notch surface in the centre of the specimen. The size and shape of the core yielding zone could be described by plasticity analysis. A stress-whitened zone subsequently initiated near the tip of the slip line zone. The stress whitening was caused by 1 m voids that were visible in the scanning electron microscope. The mean stress for stress whitening was calculated to be 43.0±1.5 MPa by a plastic stress analysis of a pressure-dependent yield material. By assuming a constant mean stress along the boundary of the stress-whitened zone, the one-dimensional shift of the elastic stress distribution was obtained. At higher stresses, hinge shear and intersecting shear were observed for thick and thin sheet, respectively. 相似文献