Lifetime extension of in‐core self‐powered neutron detector using new emitter materials

In this paper, new in‐core self‐powered neutron detector emitter candidate materials, ie, vanadium, cobalt, and silver, have been examined in their lifetimes compared with the commonly used rhodium emitter. Using a new quantitative lifetime evaluation model, the lifetimes of vanadium and cobalt were determined to be longer than that of rhodium, but these materials were also shown to have the disadvantage of low signal intensities. Under normal operating conditions, we showed that rhodium emitter can be used for 2 cycles of pressurized water reactors (PWRs) with lifetime of 4.35 years, whereas silver can be used for 5 cycles of PWRs with lifetime of 8.04 years. Three sensitivity tests were performed for rhodium and silver about (1) the emitter size, (2) the fuel assembly burnup, and (3) the emitter temperature variations. From the test results, we observed that the lifetimes of rhodium and silver emitters remained 2 and 5 cycles long, respectively. We concluded that silver can significantly extend the in‐core detector's lifetime in PWR operation.     

Exposure assessment of caffeine in children’s snacks in Korea

This study was conducted to develop an appropriate management strategy for the safe consumption of children’s snacks. In this study, a caffeine content analysis was performed on children’s snacks which were distributed at stores located near to schools. A total of 213 samples (63 chocolates, 40 ice cakes, 19 canned instant coffees, and 91 beverages) were analyzed for caffeine content. The caffeine content of chocolates, ice cakes, canned instant coffees, and beverages was 94.30, 35.03, 391.78, and 68.32 mg/kg, respectively. The results of the exposure assessment for caffeine were expressed as estimated daily intake (EDI) compared to the acceptable daily intake (ADI). The EDI/ADI ratio of the high risk group (95^th percentile) for caffeine intake was 7.63–27.13 %. The results of this study indicate that the EDI of caffeine from snacks sold at stores located near to schools is much lower than the ADI in general. Consequently, children’s snacks are thought to be safe for consumption.     

Some new volatile compounds from the non-enzymic browning reaction of glucose-glutamic acid system

Summary The volatile compounds from the Maillard reaction in the glucose - glutamic acid system were analysed by combined gas chromatography - mass spectrometry. Of the 50 peaks detected, 42 components comprising 2 acids, 2 alcohols, 5 carbonyls, 2 esters, 4 lactones, 17 furans, 4 pyrazines and 3 pyrroles were identified, four of which tentatively. Decadien 2,4-al, 2-n-pentyl furoate, 2-(2-fury()-pyrazine. -nonalactone, 2-(2-fury()-5- or 6-methylpyrazine were previously not reported to occur in heated sugar - amino acid browning systems. The new compound, 5-formyloxymethyl-2-furfural has apparently not yet been recorded in the chemical literature.The compound 5-acetoxymethyl-2-furfural had an aroma close to that of bread whereas 5-formyloxymethyl-2-furfural exhibited a very faint sweet burnt aroma.

---

Einige neue flüchtige Verbindungen aus der nicht-enzymatischen Bräunungsreaktion des Glucose-Glutaminsäure-Systems

Zusammenfassung Die flüchtigen Verbindungen aus der Maillardreaktion des Glucose-Glutaminsäure-Systems wurde mit Hilfe der Gaschromatographie/Massenspektrometrie analysiert. Von den 50 nachgewiesenen Peaks wurden 42 identifiziert: 2 Säuren, 2 Alkohole, 5 Carbonyle, 2 Ester, 4 Lactone, 17 Furane, 4 Pyrazine, 3 Pyrrole und 4 weitere provisorisch. Deca-2,4-dienal, 2-n-Pentylfluorat, 2-(2-Furyl)-pyrazin, -Nonalacton, 2-(2-Furyl)-5 oder -6-Methylpyrazin wurden bisher nicht in dem erhitzten Zucker-Aminosäuren-Bräunungssystem registriert. Die neue Verbindung 5-Formyloxymethyl-2-furfural ist anscheinend noch nicht in der chemischen Literatur festgestellt worden. Die Verbindung 5-Acetoxymethyl-2-furfural hat an ein Brot erinnerndes Aroma, während die 5-Formyloxymethyl-2-furfural-Verbindung ein sehr schwaches süßlich-verbranntes Aroma aufweist.

---

---

Taken in part from the Ph. D. thesis of the Senior Author     

An early recrudescent case of Stanford type A closing aortic dissection

A 81-year-old female was hospitalized with chest discomfort. Findings of CT scan revealed Stanford type A acute aortic dissection, but the dissecting lumen had already closed with thrombus. Aortogram showed no intimal tear, intimal flap or ulcer like projection. Under the diagnosis of "closing aortic dissection", conservative treatment was selected. The dissecting lumen was disappearing gradually, but she had a sudden chest pain on hospital day 4 and CT scan demonstrated an enlarged and enhanced dissecting lumen. She underwent an emergency operation and a hemiarch replacement was performed successfully. Her postoperative course was uneventful and she was discharged from the hospital in good health.     

Two modes of ligand binding in maltose-binding protein of Escherichia coli. Electron paramagnetic resonance study of ligand-induced global conformational changes by site-directed spin labeling

Binding of ligands to the maltose-binding protein (MBP) of Escherichia coli often causes a global conformational change involving the closure of its two lobes. We have introduced a cysteine residue onto each of these lobes by site-directed mutagenesis and modified these residues with spin labels. Using EPR spectroscopy, we examined the changes, caused by the ligand binding, in distance between the two spin labels, hence between the two lobes. The binding of both maltose and maltotetraose induced a considerable closure of the N- and C-terminal lobes of MBP. Little closure occurred upon the binding of maltotetraitol or beta-cyclodextrin. Previous study by fluorescence and UV differential absorbance spectroscopy (Hall, J. A., Gehring, K., and Nikaido, H. (1997) J. Biol. Chem. 272, 17605-17609) showed that maltose and a large portion of maltotetraose bound to MBP via one mode (R mode or "end-on" mode), which is physiologically active and leads to the subsequent transport of the ligands across the cytoplasmic membrane. In contrast, maltotetraitol and beta-cyclodextrin bound to MBP via a different mode (B mode or "middle" mode), which is physiologically inactive. The present work suggests that the B mode is nonproductive because ligands binding in this manner prevent the closure of the two domains of MBP, and, as a result, the resulting ligand-MBP complex is incapable of interacting properly with the inner membrane-associated transporter complex.     

Analysis of adjacent channel interference using distribution function for V2X communication systems in the 5.9‐GHz band for ITS

Many use cases have been presented on providing convenience and safety for vehicles employing wireless access in vehicular environments and long‐term evolution communication technologies. As the 70‐MHz bandwidth in the 5.9‐GHz band is allocated as an intelligent transportation system (ITS) service, there exists the issue that vehicular communication systems should not interfere with each other during their usage. Numerous studies have been conducted on adjacent interfering channels, but there is insufficient research on vehicular communication systems in the ITS band. In this paper, we analyze the interference channel performance between communication systems using distribution functions. Two types of scenarios comprising adjacent channel interference are defined. In each scenario, a combination of an aggressor and victim network is categorized into four test cases. The minimum requirements and conditions to meet a 10% packet error rate are analyzed in terms of outage probability, packet error rate, and throughput for different transmission rates. This paper presents an adjacent channel interference ratio and communication coverage to obtain a satisfactory performance.     

Improving Radio Frequency Transmission Properties of Graphene via Carrier Concentration Control toward High Frequency Transmission Line Applications

Graphene has been gradually studied as a high‐frequency transmission line material owing to high carrier mobility with frequency independence up to a few THz. However, the graphene‐based transmission lines have poor conductivity due to their low carrier concentration. Here, it is observed that the radio frequency (RF) transmission performance could be severely hampered by the defect‐induced scattering, even though the carrier concentration is increased. As a possible solution, the deposition of the amorphous carbon on the graphene is studied in the high‐frequency region up to 110 GHz. The DC resistance is reduced by as much as 60%, and the RF transmission property is also enhanced by 3 dB. Also, the amorphous carbon covered graphene shows stable performance under a harsh environment. These results prove that the carrier concentration control is an effective and a facile method to improve the transmission performance of graphene. It opens up the possibilities of using graphene as interconnects in the ultrahigh‐frequency region.     

Microfluidic Fabrication of Capsule Sensor Platform with Double‐Shell Structure

Metal nanoparticles are frequently employed for the colorimetric detection of specific target molecules using an aggregation‐induced shift of the localized surface plasmon resonance. However, metal nanoparticles dispersed in bulk solutions are prone to be contaminated by adhesive molecules and the dispersions tend to be diluted by sample fluids, restricting direct application to unpurified pristine samples. Here, a versatile capsule sensor platform is proposed that can encompass a variety of different types of nanoparticle‐based sensors. The capsule sensors are microfluidically prepared to obtain close control over their dimensions and composition. Their aqueous cores that are loaded with sensing materials are surrounded by an ultrathin inner oil shell and an outer hydrogel shell. The hydrogel shell prevents the diffusion of large adhesive molecules into the core, thereby preventing contamination of the sensing materials. The oil shell is selectively permeable such that it further improves the sensor selectivity. Importantly, these shells confine the sensing materials and prevent them from being diluted, securing a consistent optical property. Moreover, the capsule‐based sensors display a higher sensitivity than bulk dispersions because a smaller amount of sensing materials is used. The power of nanoparticle‐loaded capsule sensors is demonstrated using lysine‐coated gold nanoparticles to detect mercury ions.