A surface potential based drain current model for asymmetric double gate MOSFETs

In this paper, we present a generic surface potential based current voltage (I-V) model for doped or undoped asymmetric double gate (DG) MOSFET. The model is derived from the 1-D Poisson’s equation with all the charge terms included and the channel potential is solved for the asymmetric operation of DG MOSFET based on the Newton-Raphson iterative method. A noncharge sheet based drain current model based on the Pao-Sah’s double integral method is formulated in terms of front and back gate surface potentials at the source and drain end. The model is able to clearly show the dependence of the front and back surface potential and the drain current on the terminal voltages, gate oxide thicknesses, channel doping concentrations and the Silicon body thickness and a good agreement is observed with the 2-D numerical simulation results.     

Efficient solution of the differential form of Maxwell's equationsin rectangular regions

One of the problems of the finite element and the finite difference method is that as the dimension of the problem increases, the condition number of the system matrix increases as Θ(1/h² ) (of the order of h², where h is the subsection length). Through the use of a suitable basis function tailored for rectangular regions, it is shown that the growth of the condition number can be checked while still retaining the sparsity of the system matrix. This is achieved through a proper choice of entire domain basis functions. Numerical examples have been presented for efficient solution of waveguide problems with rectangular regions utilizing this approach     

Evaluation of the suitability of troposcatter prediction techniques over Northern India

The design of any radio communication system requires a suitable prediction technique for calculating the received signal levels. The optimum prediction method helps to reduce the interference problems, and improves reliability of links. In the present study the path loss values deduced from various prediction techniques are compared against observed path loss values over two troposcatter links situated in northern India. The results show that April and May are the worst months and the present space and frequency diversity configuration is not able to effectively overcome the link outages. A comparison of different path loss prediction techniques showed that Yeh’s prediction method and itu-r’s method I comes close to the observed values. The predicted path loss values for worst month using itu-r’s method deviated considerably from the observed values. The present study provides valuable inputs to the itu-r study group from the tropical countries by evaluating the itu-r prediction methods against the experimental data.     

Integrated VCO With Up/Down Converter for Si-Based 60 GHz WPAN Applications

This letter presents the design and implementation of the largest reported bandwidth of a 60 GHz up/down converter with an integrated voltage controlled oscillator (VCO) in a low-cost 0.18 mum silicon-germanium process. The up/down conversion is achieved using the 2X sub-harmonic passive mixing with anti-parallel diode pairs. A 30 GHz cross-coupled VCO is designed, optimized and integrated with the sub-harmonic mixer through a cascode amplifier to meet the local oscillator power requirements. The fully integrated chip takes only 1.5 mm² of silicon die area and consumes only 40 mW of dc power for a measured conversion loss of 12 dB at 61.5 GHz. The integrated up/down converter is measured to have greater than 9 GHz double-sided 3-dB RF bandwidth suitable for wideband high data-rate WPAN transceiver requirements. The VCO and VCO-amplifier test structures are separately fabricated and measured to have a phase noise as low as -105 dBc/Hz at 1 MHz offset with a tuning range of 2.3 GHz.     

Effect of underlap and gate length on device performance of an AlInN/GaN underlap MOSFET

We investigate the performance of an 18 nm gate length AlInN/GaN heterostructure underlap double gate MOSFET, using 2D Sentaurus TCAD simulation. The device uses lattice-matched wideband Al_0.83In_0.17N and narrowband GaN layers, along with high-k Al₂O₃ as the gate dielectric. The device has an ultrathin body and is designed according to the ITRS specifications. The simulation is done using the hydrodynamic model and interface traps are also considered. Due to the large two-dimensional electron gas (2DEG) density and high velocity, the maximal drain current density achieved is very high. Extensive device simulation of the major device performance metrics such as drain induced barrier lowering (DIBL), subthreshold slope (SS), delay, threshold voltage (V_t), I_on/I_off ratio and energy delay product have been done for a wide range of gate and underlap lengths. Encouraging results for delay, I_on, DIBL and energy delay product are obtained. The results indicate that there is a need to optimize the I_off and SS values for specific logic design. The proposed AlInN/GaN heterostructure underlap DG MOSFET shows excellent promise as one of the candidates to substitute currently used MOSFETs for future high speed applications.     

A Framework for Heterogeneous Resource Allocation in Sensor-Cloud Environment

Wireless Personal Communications - With the advent of sensor technologies, cloud applications are able to acquire sensed data from remotely located sensors which are geographically distributed....     

Prioritized Medium Access Control in Cognitive Radio Ad Hoc Networks: Protocol and Analysis

Cognitive radio (CR) technology enables opportunistic exploration of unused licensed channels. By giving secondary users (SUs) the capability to utilize the licensed channels (LCs) when there are no primary users (PUs) present, the CR increases spectrum utilization and ameliorates the problem of spectrum shortage. However, the absence of a central controller in CR ad hoc network (CRAHN) introduces many challenges in the efficient selection of appropriate data and backup channels. Maintenance of the backup channels as well as managing the sudden appearance of PUs are critical issues for effective operation of CR. In this paper, a prioritized medium access control protocol for CRAHN, PCR-MAC, is developed which opportunistically selects the optimal data and backup channels from a list of available channels. We also design a scheme for reliable switching of a SU from the data channel to the backup channel and vice-versa. Thus, PCR-MAC increases network throughput and decreases SUs’ blocking rate. We also develop a Markov chain-based performance analysis model for the proposed PCR-MAC protocol. Our simulations, carried out in \(NS-3\) , show that the proposed PCR-MAC outperforms other state-of-the-art opportunistic medium access control protocols for CRAHNs.     

Characteristics of a variable length ring oscillator and its use in PLL based systems

This paper describes the properties of a multiplexer based variable length ring oscillator and the effects of using it as a voltage controlled oscillator (VCO) in a phase locked loop (PLL) based system. The application of the proposed VCO in a PLL used as an FM demodulator or as a frequency synthesizer has been examined and it has been shown that the length control facility of the VCO could be used for improving the performances of those systems. Hardware experimental results confirm the predictions regarding the performance enhancement.     

A tutorial on wavelets from an electrical engineering perspective.I. Discrete wavelet techniques

The objective of this paper is to present the subject of wavelets from a filter-theory perspective, which is quite familiar to electrical engineers. Such a presentation provides both physical and mathematical insights into the problem. It is shown that taking the discrete wavelet transform of a function is equivalent to filtering it by a bank of constant-Q filters, the non-overlapping bandwidths of which differ by an octave. The discrete wavelets are presented, and a recipe is provided for generating such entities. One of the goals of this tutorial is to illustrate how the wavelet decomposition is carried out, starting from the fundamentals, and how the scaling functions and wavelets are generated from the filter-theory perspective. Examples (including image compression) are presented to illustrate the class of problems for which the discrete wavelet techniques are ideally suited. It is interesting to note that it is not necessary to generate the wavelets or the scaling functions in order to implement the discrete wavelet transform. Finally, it is shown how wavelet techniques can be used to solve operator/matrix equations. It is shown that the “orthogonal-transform property” of the discrete wavelet techniques does not hold in numerical computations