矿石中金的快速测定

研究了活性炭纤维滤布富集分离的条件和解脱方法,并利用微波溶样、液珠萃取比色法测定矿石中的金。该方法的测定范围为(0.5~xx)×10-6,相对标准偏差RSD为3.2%,可用于矿石中金的野外快速测定。     

Novel Hyperbranched predominantly Alternating Copolymers Made From A Charge Transfer Complex monomer pair of p-(chloromethyl)styrene and Acrylonitrile via Controlled Living Radical Copolymerization

Summary Novel hyperbranched copolymers were successfully synthesized by the controlled charge transfer complex inimer and living radical copolymerization of p-(chloromethyl)styrene (PCMS) and acrylonitrile (AN). The resulting copolymers were characterized by SEC, NMR, FTIR, DSC and elemental analysis etc.. The influences of reaction conditions, such as the polymerization temperature, the catalyst (CuBr) concentration and the monomer ratio, on the resulting copolymers were investigated in detail. The monomer reactivity ratios were evaluated to be r_PCMS=0.937 and r_AN=0.088 respectively by the Fineman-Ross method. The higher are the polymerization temperature and the ratio of catalyst to monomer, the higher is the branching degree of the resulting copolymer. When the amount of monomer AN was used in excess than that of the monomer PCMS in the raw feed, the hyperbranched predominantly alternating copolymers HP[PCMS-co-AN] could be obtained. These hyperbranched copolymers were successfully used as functional macroinitiators to synthesize the star-shaped poly(PCMS-co-AN)/poly(MMA) block copolymers.     

Failure loads for notched graphite/epoxy laminates with a softening strip

The strengths of two graphite/epoxy notched laminate systems with a softening strip were investigated. The softening strip was created by replacing the 0°-graphite/epoxy plies by a glass/epoxy composite. Experimental results indicated that the use of softening strips could significantly increase the laminate strength. Analysis was performed with finite elements developed using the classical laminated plate theory and was shown to be adequate. A simple point-stress failure criterion was used to predict the strength of notched laminates with softening strips and the result was found to be satisfactory.     

面向对象的程序设计语言CLUSTER86的设计与实现

本文介绍了笔者设计并实现的一种新型的面向对象的程序设计语言,着重讨论了在设计过程中采用的新的概念,并和其它类似语言作了比较.     

用单透镜变换由多模光纤出射的大功率Nd：YAG激光束的特性

根据理论假设，通过选取单透镜的参数和位置，计算说明了单透镜使经由多模光纤出射的大功率Ｎｄ：ＹＡＧ激光束的发射角压缩，光束聚焦效率提高，光束截面场为高斯分布；文中的计算结果符合已知规律，从而说明了理论假设的正确性。     

非电量微机采集系统

实现水电厂电量快速微机巡回检测，温度采集较其它信号更为困难，本文着重讨论温度信号转换及与微机系统的连接。且介绍某水电厂微机控系统中非电量检测装置的硬件结构和软件编制。     

CIMSCLASS─—面向CIM的零件分类软件开发工具

介绍了一个能为工厂设置零件编码系统和开发零件分类系统的工具系统。该系统能适应用户的具体环境，能对零件的特征信息做较详细的描述和建立相应目标的零件分类系统，从而能在ＧＴ（成组技术）基础上为机械加工零件开发ＣＡＤ／ＣＡＰＰ／ＣＡＭ集成系统提供支持，以满足ＣＩＭＳ的需要。     

Effect of dual-scale microstructure on the toughness of laminar zirconia composites

Numerical study by the finite element method (FEM) is performed to investigate the effect of dual-scale microstructure on the toughness of laminar zirconia composite. The computation is based on the micromechanics constitutive model of polycrystal transformation plasticity developed by Sun et al. [10] where both transformation induced shear and softening effects during autocatalytic transformation are taken into account. The numerical simulation presented in this paper successfully reproduced the experimentally observed two effects of the dual-scale microstructure on the toughness of laminar zirconia composite, i.e., the truncation of the elongated transformation frontal zone that forms in single phase Ce-ZrO₂ and the propagation of the transformation zone along the layers normal to the crack plane. Quantitative analysis on the role of microstructure in transformation toughening of laminar zirconia composite is first carried out in the present work which will provide a starting point for the microstructural design of this novel advanced composite in the future.Presented at the Far East Fracture Group (FEFG) International Symposium on Fracture and Strength of Solids. 4–7 July 1994 in Xi'an, China.     

铸铁热分析用试样新型激冷剂的实验研究

从冷却曲线上相变段倾角最小原则出发，研究了新型激冷剂的配比与热分析法检测铸铁成分精度的关系，实验结果表明，能使相变段倾角最小的成分配比，也能提高对铸铁成分的热分析和检测精度。     

套管固井质量问题及对策分析

从油田现场反应的情况出发，对调整井固井，尾管固井，大位移井套管固井和其他固井的质量问题进行了分析，针对各种问题产生的原因，提出了相应换解决办法。