Polyaniline-multiwalled carbon nanotube composites: Characterization by WAXS and TGA

Polyaniline/carboxylated multi-walled carbon nanotube (PAni/c-MWNT) nanocomposites have been synthesized by micellar aided emulsion polymerization with various c-MWNTs compositions, viz., 0.5, 1, 5, and 10 wt %. The microcrystalline parameters such as the nanocrystal size (〈N〉), lattice strain (g), interplanar distance (d_hkl), width of the crystallite size distribution, surface weighted crystal size (D_s), and volume of the ordered regions were calculated from the X-ray data by using two mathematical models, namely the Exponential distribution and Reinhold distribution methods. The effects of heat ageing on the microcrystalline parameters of the PAni/c-MWNT nanocomposites were also studied and the results are correlated. The thermal stability and electrical resistivity of the PAni/c-MWNT nanocomposites were examined with thermogravimetric analysis (TGA) and a conventional two-probe method. The TGA data indicate that the thermal stability of the nanocomposites improved after the incorporation of c-MWNTs. The influence of temperature on the resistivity of the nanocomposites was also measured. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.     

Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

A new synthesis procedure for titanium-containing zeolites under strong alkaline conditions and the catalytic activity for partial oxidation and photocatalytic decomposition

A new synthesis procedure for titanium-containing aluminosilicate zeolites has been obtained using a clear colloidal dispersion (sol) which was prepared with titanium isopropoxide, water, hydrochloric acid and colloidal silica, Ludox. When NaY, KL, offretite, mordenite and ZSM-5 zeolites were crystallized from the sol following conventional hydrothermal crystallization procedures, all the aluminosilicate zeolites showed the same X-ray absorption fine structure at the Ti K edge indicating framework Ti. The zeolites showed remarkable catalytic activity for the partial oxidation of cyclohexene using H₂O₂ as an oxidant and the photocatalytic decomposition of trichloroethene using water.     

A 6 GHz 68 mW BiCMOS phase-locked loop

The design of a 6 GHz fully monolithic phase-locked loop fabricated in a 1 μm, 20 GHz BiCMOS technology is described. The circuit incorporates a voltage-controlled oscillator that senses and combines the transitions in a ring oscillator to achieve a period equal to two ECL gate delays. A mixer topology is also used that exhibits full symmetry with respect to its inputs and operates with supply voltages as low as 1.5 V. Dissipating 60 mW from a 2 V supply, the circuit has a tracking range of 300 MHz, an rms jitter of 3.1 ps, and phase noise of -75 dBc/Hz at 1 kHz offset     

Transluminal balloon angioplasty, stents, and atherectomy

Arterial bypass grafting for occlusive disease is still considered the gold standard in the treatment of arterial occlusive disease. However, less invasive methods are available for select patients. Percutaneous balloon angioplasty has been shown to be effective in focal iliac artery stenosis, with patency rates of 50% to 90% at 5 years. Patency rates for femoropopliteal lesions are generally less than 50% at 2 years. Complications seen with balloon angioplasty often can be treated with arterial stents. Stents can be categorized into balloon-expandable, which provide a rigid scaffold to support the artery, self-expanding, which exert radial force to resist external compression, and thermal expanding stents, which allow for the use of a smaller introducer sheath. Another treatment option is atherectomy, in which the offending lesion is removed instead of fracturing and dilating the lumen. Although overall initial results of atherectomy have not been favorable, short lesions with eccentric atheroma or intimal hyperplasia, such as those seen in dialysis access fistulas or vein graft stenoses, may respond well.     

Function of yeast Rad52 protein as a mediator between replication protein A and the Rad51 recombinase

The RAD51 and RAD52 genes of Saccharomyces cerevisiae are key members of the RAD52 epistasis group required for genetic recombination and the repair of DNA double-stranded breaks. The RAD51 encoded product mediates the DNA strand exchange reaction. Efficient strand exchange is contingent upon the addition of the heterotrimeric single-stranded DNA binding factor replication protein A (RPA) after Rad51 has nucleated onto the single-stranded DNA. However, if the single-stranded DNA is incubated with Rad51 and RPA simultaneously to mimic what may be expected to occur in vivo, the efficiency of strand exchange decreases dramatically, revealing an inhibitory effect of RPA that is distinct from its stimulatory function. Interestingly, the inclusion of Rad52 protein, which has been purified in this study from yeast cells, restores the efficiency of strand exchange. Thus, Rad52 functions as a co-factor for the Rad51 recombinase, acting specifically to overcome the apparent competition by RPA for binding to single-stranded DNA.     

A linear minimum mean square error multiuser receiver inRayleigh-fading channels

We generalize the multiuser (CDMA spread spectrum) communication systems to the fading environments. We first extend Verdu's (1986) conventional optimum receiver to Rayleigh-fading environments and then evaluate its performance. Having no knowledge of the received power at the receiving end, we therefore need an estimator to efficiently estimate the received signal strength of each user in fading environments. A linear minimum mean square error (LMMSE) unbiased estimator is proposed to attain this goal. By using the minimum mean square error (MMSE) Bayesian estimation, we further propose the LMMSE bit estimator for efficient demodulation. Its performance is close to the optimum multiuser receiver but with a much simpler polynomial complexity. To further reduce the complexity, we extend the LMMSE estimator to the sequential LMMSE estimator. In sequential estimation, we do not need to implement the matched filter banks and to perform the matrix inversion when estimating. In addition, it converges after approximately 2k iterations, where k is the number of users. With this fast convergence property and the simple structure, the sequential LMMSE estimator provides an attractive alternative to the implementation of a multiuser system