On Finding the Multicast Protection Tree Considering SRLG in WDM Optical Networks

In this letter, a new sharing mechanism, SRLG sharing, is proposed, which allows the links of the same shared risk link group (SRLG) in a primary light tree to share protections in WDM optical networks. In previous studies, how to share spare resources with SRLG constraints has not been studied in multicast optical networks. In this letter, considering SRLG sharing, we propose a novel algorithm –multicast with SRLG sharing (MSS)– to establish a protection light tree. Finally, the algorithm MSS and the algorithm multicast with no SRLG sharing (MNSS) are compared through a simulation to show that our new sharing scheme of SRLG sharing is more efficient than that of no SRLG sharing in terms of spare resource utilization and blocking probability.     

Detecting and characterising returns in a pulsed ladar system

A new multi-spectral laser radar (ladar) system based on the time-correlated single photon counting, time-of-flight technique has been designed to detect and characterise distributed targets at ranges of several kilometres. The system uses six separated laser channels in the visible and near infrared part of the electromagnetic spectrum. The authors present a method to detect the numbers, positions, heights and shape parameters of returns from this system, used for range profiling and target classification. The algorithm has two principal stages: non-parametric bump hunting based on an analysis of the smoothed derivatives of the photon count histogram in scale space, and maximum likelihood estimation using Poisson statistics. The approach is demonstrated on simulated and real data from a multi-spectral ladar system, showing that the return parameters can be estimated to a high degree of accuracy.     

Structured low-density parity-check codes

This article describes the different methods to design regular low density parity-check (LDPC) codes with large girth. In graph terms, this corresponds to designing bipartite undirected regular graphs with large girth. Large girth speeds the convergence of iterative decoding and improves the performance at least in the high SNR range, by slowing down the onsetting of the error floor. We reviewed several existing constructions from exhaustive search to highly structured designs based on Euclidean and projective finite geometries and combinatorial designs. We describe GB and TS LDPC codes and compared the BER performance with large girth to the BER performance of random codes. These studies confirm that in the high SNR regime these codes with high girth exhibit better BER performance. The regularity of the codes provides additional advantages that we did not explore in this article like the simplicity of their hardware implementation and fast encoding.     

子空间方法盲多用户检测技术分析与探索

着重分析了基于子空间跟踪的盲线性多用户检测算法 ,并对其内部算法模块进行了仿真比较 ,最后对算法性能改善方法提出了自己的新思路     

A three-dimensional FE analysis of large deformations for impact loadings using tetrahedral elements

 A three-dimensional dynamic program for the anaysis of large deformations in contact-penetration problems is developed using the finite element Lagrangian method with explicit time integration. By incorporating a tetrahedral element, which allows a single-point integration without a special hourglass control scheme, this program can be more effective to the present problem. The position code algorithm is used to search contact surface. Eroding surfaces are also considered. The defense node algorithm was slightly modified for the calculation of contact forces. A study of obliquity effects on metallic plate perforation and ricochet processes in thin plates impacted by a sphere was conducted. It is well simulated that on separation of two parts of the sphere, the portion still within the crater tends to perforate, while the portion in contact with the plate surface ricochets. This deformation pattern is observed in experiments, especially at high obliquities. A long rod that impacts an oblique steel plate at high impact velocity was also simulated in order to study the dynamics of the rod caused by the three dimensional asymmetric contact. The agreement between simulated and experimental results is quite good. Fracture phenomena occuring at high obliquity deserves further investigations. Received: 20 February 2002 / Accepted: 20 September 2002     

Measurement and numerical simulation of three‐dimensional fiber orientation states in injection‐molded short‐fiber‐reinforced plastics

To determine three‐dimensional fiber orientation states in injection‐molded short‐fiber composites, a confocal laser scanning microscope (CLSM) is used. Since the CLSM optically sections the specimen, more than two images of the cross sections on and below the surface of the composite can be obtained. Three‐dimensional fiber orientation states can be determined by using geometric parameters of fiber images obtained from two parallel cross sections. For experiments, carbon‐fiber‐reinforced polystyrene is examined by the CLSM and geometric parameters of fibers on each cross‐sectional plane are measured by an image analysis. In order to describe fiber orientation states compactly, orientation tensors are determined at different positions of the prepared specimen. Three‐dimensional orientation states are obtained without any difficulty by determining the out‐of‐plane angles utilizing fiber images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell–core structure along the thickness of the specimen. Fiber orientation tensors are predicted by a numerical analysis and the numerically predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from the fountain flow effects, which are not considered in the numerical analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 500–509, 2003     

Enhanced thermal stability of a sputtered titanium-nitride film as a diffusion barrier for capacitor-bottom electrodes

The effect of a thin RuO_x layer formed on the Ru/TiN/doped poly-Si/Si stack structure was compared with that on the RuO_x/TiN/doped poly-Si/Si stack structure over the post-deposition annealing temperature ranges of 450–600°C. The Ru/TiN/poly-Si/Si contact system exhibited linear behavior at forward bias with a small increase in the total resistance up to 600°C. The RuO_x/TiN/poly-Si/Si contact system exhibited nonlinear characteristics under forward bias at 450°C, which is attributed to no formation of a thin RuO_x layer at the RuO_x surface and porous-amorphous microstructure. In the former case, the addition of oxygen at the surface layer of the Ru film by pre-annealing leads to the formation of a thin RuO_x layer and chemically strong Ru-O bonds. This results from the retardation of oxygen diffusion caused by the discontinuity of diffusion paths. In particular, the RuO_x layer in a nonstoichiometric state is changed to the RuO₂-crystalline phase in a stoichiometric state after post-deposition annealing; this phase can act as an oxygen-capture layer. Therefore, it appears that the electrical properties of the Ru/TiN/poly-Si/Si contact system are better than those of the RuO_x/TiN/poly-Si/Si contact system.     

MEMS封装技术研究进展

介绍了MEMS封装技术的特点、材料以及新技术,包括单片全集成MEMS封装、多芯片组件(MCM)封装、倒装芯片封装、准密封封装和模块式MEMS封装等。文中还介绍了MEMS产品封装实例。     

600 A IGBT开关电路及其散热系统设计

采用IGBT开关电路，对大功率电阻带进行直流脉宽调制控制，实现了内燃机车大功率直流发电机负载实验中的负载大小的连续调节。为了避免在实验过程中IGBT器件的温度过高，采用独特的双管IGBT结构和双向强迫风冷的散热系统。实验表明该电路运行稳定、可靠。     

车古201潜山油藏完井方式研究

研究了国内外潜山油藏完井方式应用及其使用条件、井身结构的应用 ,针对车古 2 0 1油藏特点 ,论证了其对裸眼完井、筛管完井、尾管射孔完井、管外封隔器完井的适应性 ,通过对比研究 ,从更好地满足油藏工程、采油工艺、增产措施出发 ,选择出车古 2 0 1潜山油藏最合理的完井方式为尾管注水泥射孔完井 ,并给出了应采用的井身结构