Managing Complexity in Object-Oriented Analysis

The current approaches in Object-Oriented Analysis have limitations on modeling complex real world systems because they require priori knowledge about objects and their interactions before applying them. This may be practical in small systems and systems with clear domain knowledge, but not in large real world systems with unclear domain knowledge. Our approach uses a stepwise refinement technique in a top-down manner to the Object-Oriented Analysis stage with the application of use cases. This approach is especially good for new areas where we do not know all the information in advance. We present the approach with an example of its application to the B-ISDN service modeling and distributed systems.     

Magnetically Guidable Proteinaceous Adhesive Microbots for Targeted Locoregional Therapeutics Delivery in the Highly Dynamic Environment of the Esophagus

The esophagus is a tubular-shaped muscular organ where swallowed fluids and muscular contractions constitute a highly dynamic environment. The turbulent, coordinated processes that occur through the oropharyngeal conduit can often compromise targeted administration of therapeutic drugs to a lesion, significantly reducing therapeutic efficacy. Here, magnetically guidable drug vehicles capable of strongly adhering to target sites using a bioengineered mussel adhesive protein (MAP) to achieve localized delivery of therapeutic drugs against the hydrodynamic physiological conditions are proposed. A suite of highly uniform microparticles embedded with iron oxide (IO) nanoparticles (MAP@IO MPs) is microfluidically fabricated using the genipin-mediated covalent cross-linking of bioengineered MAP. The MAP@IO MPs are successfully targeted to a specific region and prolongedly retained in the tubular-structured passageway. In particular, orally administered MAP@IO MPs are effectively captured in the esophagus in vivo in a magnetically guidable manner. Moreover, doxorubicin (DOX)-loaded MAP@IO MPs exhibit a sustainable DOX release profile, effective anticancer therapeutic activity, and excellent biocompatibility. Thus, the magnetically guidable locomotion and robust underwater adhesive properties of the proteinaceous soft microbots can provide an intelligent modular approach for targeted locoregional therapeutics delivery to a specific lesion site in dynamic fluid-associated tubular organs such as the esophagus.     

A 2.4-GHz Low-Power Low-IF Receiver and Direct-Conversion Transmitter in 0.18-μm CMOS for IEEE 802.15.4 WPAN Applications

In this paper, a low-power low-IF receiver and a direct-conversion transmitter (DCT) suitable for the IEEE standard 802.15.4 radio system at the 2.4-GHz band are presented in 0.18-mum deep n-well CMOS technology. By using vertical NPN (V-NPN) bipolar junction transistors in the baseband analog circuits of the low-IF receiver, the image rejection performance is improved and the power consumption is reduced. In addition, by applying the V-NPN current mirrored technique in a DCT, the carrier leakage is reduced and the linearity performance is improved. The receiver has 10 dB of noise figure, -15 dBm of third-order input intercept point, and 35 dBc of image rejection. The transmitter has more than -2 dBm of transmit output power, -35 dBc of local oscillator leakage, and -46 dBc of the transmit third harmonic component. The receiver and transmitter dissipate 6 and 9 mA from a 1.8-V supply, respectively     

A novel ultracompact two-mode-interference wavelength division multiplexer for 1.5-/spl mu/m operation

A novel ultracompact 2/spl times/2 wavelength division multiplexer (WDM) for 1.55-/spl mu/m operation based on highly dispersive two-mode interference (TMI) was designed, theoretically modeled, and verified using a finite-difference-time-domain (FDTD) method. A two-moded waveguide assisted with a dispersive tooth-shaped grating provided a mode-dependent reflection band of central wavelength at 1.55 /spl mu/m. The wavelengths of 1538 and 1572 nm that were at the band edges and had the lowest reflection losses and relatively high dispersion were selected for wavelength multiplexing. The result showed that the wavelengths were separated by grating dispersion in a coupler length of 75 /spl mu/m which was much shorter than the required length of 1.1 mm in a regular TMI multiplexer of no grating. Insertion loss of about 1.7 dB and channel contrast of about 12 dB were achieved.     

Electromagnetic scattering from arbitrary shaped conducting bodiescoated with lossy materials of arbitrary thickness

A simple and efficient numerical technique is presented to solve the electromagnetic scattering problem of coated conducting bodies of arbitrary shape. The surface equivalence principle is used to formulate the problem in terms of a set of coupled integral equations involving equivalent electric and magnetic surface currents which represent boundary fields. The conducting structures and the dielectric materials are modeled by planar triangular patches, and the method of moments is used to solve the integral equations. Numerical results for scattering cross sections are given for various structures and compared with other available data. These results are proved accurate by a number of representative examples     

Performance of Efficient Signal Detection for LED-ID Systems

In this paper, effects of reader-to-reader interference are investigated for LED identification (LED-ID) system in a multi-reader environment. The LED-ID readers typically use different channels to avoid collision between readers. However, in-channel collision usually happens in terms of interrogation range. A reader-to-reader interference scenario is proposed, and nominal interrogation range of a desired reader is derived from this model. In order to evaluate the LED-ID reader-to-reader interference quantitatively, an efficient detection scheme is proposed and simulated by employing spreading sequence. The spreading sequence is inserted between each user’s frame formats. In the receiver, the desired signal is detected by using correlation among inserted spreading sequences. From simulation results, it is confirmed that the proposed scheme is very effective to enhance reliability of LED-ID communication systems.     

Structural Explanation of the Dielectric Enhancement of Barium Titanate Nanoparticles Grown under Hydrothermal Conditions

When synthesized under certain conditions, barium titanate (BaTiO₃, BTO) nanoparticles are found to have the non-thermodynamic cubic structure at room temperature. These particles also have a several-fold enhanced dielectric constant, sometimes exceeding 6000, and are widely used in thin-layer capacitors. A hydrothermal approach is used to synthesize BTO nanocrystals, which are characterized by a range of methods, including X-ray Rietveld refinement and the Williamson–Hall approach, revealing the presence of significant inhomogeneous strain associated with the cubic phase. However, X-ray pair distribution function measurements clearly show the local structure is lower symmetry than cubic. This apparent inconsistency is resolved by examining 3D Bragg coherent diffraction images of selected nanocrystals, which show the existence of ≈50 nm-sized domains, which are interpreted as tetragonal twins, and yet cause the average crystalline structure to appear cubic. The ability of these twin boundaries to migrate under the influence of electric fields explains the dielectric anomaly for the nanocrystalline phase.     

Highly Crystalline Soluble Acene Crystal Arrays for Organic Transistors: Mechanism of Crystal Growth During Dip‐Coating

The preparation of uniform large‐area highly crystalline organic semiconductor thin films that show outstanding carrier mobilities remains a challenge in the field of organic electronics, including organic field‐effect transistors. Quantitative control over the drying speed during dip‐coating permits optimization of the organic semiconductor film formation, although the kinetics of crystallization at the air–solution–substrate contact line are still not well understood. Here, we report the facile one‐step growth of self‐aligning, highly crystalline soluble acene crystal arrays that exhibit excellent field‐effect mobilities (up to 1.5 cm V^?1 s^?1) via an optimized dip‐coating process. We discover that optimized acene crystals grew at a particular substrate lifting‐rate in the presence of low boiling point solvents, such as dichloromethane (b.p. of 40.0 °C) or chloroform (b.p. of 60.4 °C). Variable‐temperature dip‐coating experiments using various solvents and lift rates are performed to elucidate the crystallization behavior. This bottom‐up study of soluble acene crystal growth during dip‐coating provides conditions under which one may obtain uniform organic semiconductor crystal arrays with high crystallinity and mobilities over large substrate areas, regardless of the substrate geometry (wafer substrates or cylinder‐shaped substrates).     

Bendable and Splitter-Integrated Optical Subassembly Based on a Flexible Optical Board

A bendable and splitter-integrated optical subassembly (OSA) is suggested as a short-distance board-to-board optical interconnection. This OSA was fabricated by simply packaging a vertical-cavity surface-emitting laser on a flexible optical board having an embedded 1 $times$ 8 optical splitter waveguide. Finally, we measured various optical characteristics of the OSA, including insertion, twist, and bending losses.      

A single-input dual-output 13.56 MHz CMOS AC–DC converter with comparator-driven rectifiers for implantable devices

A highly efficient single-input, dual-output AC–DC converter for wireless power transfer in implantable devices is implemented using the 0.18-µm CMOS process. The proposed AC–DC converter, consisting of three rectifiers with cross-coupled NMOS transistors and comparator-driven PMOS transistors, achieves up to 79.5% power conversion efficiency at 13.56 MHz operation frequency in order to provide dual outputs of 1.2 V and 2.2 V DC voltages along with 6.2 mA and 22.6 mA of current, respectively, to the implant device from a single RF input. The designed IC consumes a core die area of 0.18 mm².