Efficient fog removal from video

In this paper, a framework of real-time video processing for fog removal using uncalibrated single camera system is proposed. Intelligent use of temporal redundancy present in video frames paves the way for real-time implementation. Any fog removal algorithm for images acquired with uncalibrated single camera system can be extended to video using the proposed framework. For the purpose of real-time implementation, several fog removal algorithms for images are investigated and few top ranking algorithms in speed and quality are chosen. Simulation results confirm that proposed framework reduces the computation per frame significantly. Proposed fog removal framework has a wide application in navigation, transportation, and other industries.     

INDEX: An INDustrial Building Design EXpert

This paper presents an account of a research project concerned with the application of artificial intelligence techniques to structural design in civil engineering. INDEX is a rule-based system for the design of industrial buildings that is being developed at the University of Edinburgh. It has a blackboard architecture and its knowledge base is organized into a hierarchy of two levels. The main focus of this paper is to summarize the implementation aspects of one of its knowledge modules, ALTSEL which is responsible for the preliminary design. The organization of knowledge inside the ALTSEL module is briefly outlined using a number of representative rules from its sub-modules. The use of the Edinburgh PROLOG Blackboard Shell in the development of INDEX is also described briefly.     

Novel 1,3,4-oxadiazole derivatives as efficient sensitizers for dye-sensitized solar cells: A combined experimental and computational study

We have synthesized and characterized donor–π–spacer–acceptor type molecules in which 1,3,4-oxadiazoles are π-spacers, triphenylamines are the donors and cyanoacetic acid are the acceptors for use as sensitizers in dye-sensitized solar cells (DSSCs). Detailed absorption, emission, electrochemical, photoelectrochemical and computational studies have been carried out on five novel derivatives. The dyes have an absorption range of 377–388 nm, and an emission in the range of 494–540 nm. There is a large charge transfer from the donor side to the acceptor side on excitation. The propeller shape of the triphenylamine and the bulky substituents on it help in reducing the dye-aggregation on TiO₂ surface. The dyes exhibited good overall conversion efficiency (2.79–3.21%). Plane wave calculations indicate that the dye has a reasonably strong binding to the TiO₂ surface and the generated DOS picture shows an overlap of the molecular orbitals of the dye and the TiO₂ bands. We conclude that the dyes have a promising role as sensitizers in DSSC.     

Performance analysis of an industrial waste heat‐based trigeneration system

The thermodynamic performance of an industrial waste heat recovery‐based trigeneration system is studied through energy and exergy efficiency parameters. The effects of exhaust gas inlet temperature, process heat pressure, and ambient temperature on both energy and exergy efficiencies, and electrical to thermal energy ratio of the system are investigated. The energy efficiency increases while electrical to thermal energy ratio and exergy efficiency decrease with increasing exhaust gas inlet temperature. On the other hand, with the increase in process heat pressure, energy efficiency decreases but exergy efficiency and electrical to thermal energy ratio increase. The effect of ambient temperature is also observed due to the fact that with an increase in ambient temperature, energy and exergy efficiencies, and electrical to thermal energy ratio decrease slightly. These results clearly show that performance evaluation of trigeneration system based on energy analysis is not adequate and hence more meaningful evaluation must include exergy analysis. The present analysis contributes to further information on the role of exhaust gas inlet temperature, process heat pressure, ambient temperature influence on the performance of waste heat recovery‐based trigeneration from a thermodynamic point of view. Copyright © 2009 John Wiley & Sons, Ltd.     

Sonochemical synthesis of crystalline nanoporous zinc oxide spheres and their application in dye-sensitized solar cells

A composite material made of zinc oxide and polyvinyl alcohol was prepared by a sonochemical method. Annealing of the composite under air removed the polymer, leaving porous spheres of ZnO. This change was accompanied by a change of the surface area from 2 m²/g to 34 m²/g. The porous ZnO particles were used as the electrode material for dye-sensitized solar cells (DSSCs). It was tested by forming a film of the doped porous ZnO on a conductive glass support. The performance of the solar cell is reported.     

Electric and dielectric study of cobalt substituted MgMn nanoferrites synthesized by solution combustion technique

Cobalt substituted Mg–Mn nanoferrites with formulae Mg_0.9Mn_0.1Co_xFe_2?xO₄, x=0.0, 0.1, 0.2 and 0.3, have been synthesized for the first time by the solution combustion technique. The effects of Co²⁺ ions on the dc resistivity, dielectric constant and dielectric loss tangent of Mg–Mn nanoferrites at room temperature are presented in this paper. X-ray diffraction confirmed the formation of a single phase spinel structure. Particle size was found to increase, 20.9–23.9 nm, with increasing Co²⁺ concentration. The dc resistivity was increased by two order of magnitude with substitution of Co²⁺ ions while the dielectric constant was found to be decreasing with the increasing concentration of cobalt ions. The value of dc resistivity obtained for Mg_0.9Mn_0.1Fe₂O₄ nanoferrite in our work is greater than the value obtained for the same composition prepared by the conventional ceramic technique. Further, the dielectric constant and dielectric loss tangent were observed to be decreasing with the increase in frequency.     

An evaluation of fuelwood properties of some Aravally mountain tree and shrub species of Western India

The study analyses the fuelwood characteristics of 26 trees including shrub species from the dry deciduous forest in Aravally region, Rajasthan, Western India was carried out to explore trees with potential for fuelwood production. Fuelwood value index (FVI) based on the properties of calorific value, wood density and ash. Calorific value was ranged between 18.54 ± 0.04 and 27.44 ± 0.09 KJ g⁻¹ in Jatropha curcus and Wrightia tinctoria respectively. Wood density varied from 0.538 ± 0.01 to 0.966 ± 0.07 g/cm³ in J. curcus and Acacia nilotica. Same way ash and moisture content was highest in J. curcus (3.38 ± 0.19%) and Sterculia urens (70.28 ± 7.52%) and lowest in Miliusa tomentosa (0.85 ± 0.06%) and Azadirachta indica (30.7 ± 10.02%) respectively. On the basis, of the 26 species analyzed, M. tomentosa has the highest FVI, followed by Lannea coromandelica, Acacia leucophloea, Madhuca indica, A. nilotica, W. tinctoria, Butea monosperma, Zizyphus nummularia, S. urens, Boswellia serrata, A. indica, Grewia tenax, Syzygium cuminii, Tectona grandis and Dalbergia sissoo were shown to have promising fuelwood production.     

Poly(3-hexylthiophene) and hexafluoro-2-propanol-substituted polysiloxane based OFETs as a sensor for explosive vapor detection

The organic field effect transistors (OFETs) with regioregular poly 3-hexylthiophene (rr-P3HT) and hexafluoro-2-propanol-substituted polysiloxane (SXFA) as an organic layer, have been used for detection of explosive vapors with excellent sensitivity of less than 70 ppt for 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX) and less than 100 ppt for 2,4,6-trinitrotoluene (TNT). The sensor response (% change in saturation current) was found to be 125 ± 10% for TNT and 90 ± 10% for RDX. It was also observed that the incorporation of Cu^II tetraphenylporphyrin (CuTPP) into rr-P3HT/SXFA matrix resulted in an improved selectivity for the vapors of nitro based analytes (TNT, RDX and DNB) as compared to the vapors of non explosive oxidizing agents such as nitrobenzene (NB), benzoquinone (BQ) and benzophenone (BP). This is attributed to the increased binding of the vapors containing nitro compound to the thin films due to the presence of CuTTP. Spin coated thin films were further characterized by Atomic Force Microscopy (AFM) and Electrostatic Force Microscopy (EFM).