On-line monitoring of fuel moisture-content in biomass-fired furnaces by measuring relative humidity of the flue gases

Combustion of biomass for heat and power production is continuously growing in importance, because of incentives for replacing fossil energy resources with renewable ones. In biomass combustion, the moisture content of the fuel is an essential operation parameter, which often fluctuates for biomass fuels. Variation in moisture content complicates the operation of the furnaces and results in an uncertainty in the energy content of the fuel delivered to a plant. The fuel moisture-content in a furnace may be determined either by direct measurement on the entering fuel or by measuring the moisture and oxygen contents of the flue gases deriving the moisture content of the fuel. However, reliable methods of a motivated cost for the small to medium-scale furnaces are today not available. An exception is if the furnace is equipped with flue-gas condenser, which can be used to estimate the moisture content of the flue gases. A limitation of this method is, though, that not all furnaces have flue-gas condensers and that the measured signal has an inherent time delay.In this work, measurement of the relative humidity (RH) of the flue gases from a furnace is investigated as the central component in the on-line monitoring of the moisture content of the fuel in a furnace. The method was analysed with humid air in a laboratory environment and tested for accuracy and dynamical behaviour in two biomass-fired heat-production units, one circulating fluidised-bed boiler (CFB) and one grate furnace. The results show that the method, which is easy to calibrate on site, can be used to predict the moisture content of the biomass fuel in the grate furnace with very good precision (<4% error). Furthermore, the method detects variations in moisture content of the furnace flue gases due to changes in the moisture content of the combusted fuel within the order of seconds. Since the transport time of the flue gases from the furnace to the measurement position is of the same order of magnitude, the total time for detection of a change in the moisture content of the fuel is small enough for the signal to be used to control both the fuel feed and the combustion air in a grate furnace.     

Effective reduction of AlN defect luminescence by fluorine implantation

We report on the effective reduction of AlN host lattice defect cathodoluminescence by high dose ion implantation of light elements such as fluorine as well as chlorine and neon with peak concentrations of 1 at.%. In order to distinguish between luminescence suppression in the visible to luminescence quenching due to radiation damage, all samples were additionally implanted with europium at fluences of 1 · 10¹³ ions/cm². After annealing the samples at 1373 K under vacuum conditions cathodoluminescence spectra were recorded at room temperature (300 K) and at cryogenic temperature (12 K). These investigations reveal that different light ion species have different influences on the defect luminescence of the AlN host lattice which is likely due to selective passivation of these defects. The best ratio of defect luminescence suppression to radiation damage induced luminescence quenching is achieved in the case of fluorine co-doping.     

The Adhesion‐Enhanced Contact Electrification and Efficiency of Triboelectric Nanogenerators

In the present work, the contact electrification of polymers that differ in adhesion strength is studied. Electrical current is measured along with adhesion in macroscale contacting‐separation experiments. Additionally, local adhesion and roughness are studied with atomic force microscopy to get deeper insight into relations between surface properties and electrification. Measurements reveal that higher surface charge is formed on more adhesive surfaces, thus confirming covalent bond cleavage as a mechanism for contact electrification of polymers. Investigated materials possess enhanced contact electrification making them attractive candidates for the conversion of mechanical energy to electrical in triboelectric nanogenerator devices.     

Modeling Alcohol Dehydrogenase Catalysis in Deep Eutectic Solvent/Water Mixtures

The use of oxidoreductases (EC1) in non-conventional reaction media has been increasingly explored. In particular, deep eutectic solvents (DESs) have emerged as a novel class of solvents. Herein, an in-depth study of bioreduction with an alcohol dehydrogenase (ADH) in the DES glyceline is presented. The activity and stability of ADH in mixtures of glyceline/water with varying water contents were measured. Furthermore, the thermodynamic water activity and viscosity of mixtures of glyceline/water have been determined. For a better understanding of the observations, molecular dynamics simulations were performed to quantify the molecular flexibility, hydration layer, and intraprotein hydrogen bonds of ADH. The behavior of the enzyme in DESs follows the classic dependence of water activity (a_W) in non-conventional media. At low a_W values (<0.2), ADH does not show any activity; at higher a_W values, the activity was still lower than that in pure water due to the high viscosities of the DES. These findings could be further explained by increased enzyme flexibility with increasing water content.     

Synthesis of 2‐[18F]Fluoro‐2‐deoxyisosorbide 5‐mononitrate and Assessment of Its in vivo Biodistribution as Determined by Dynamic Positron Emission Tomography (PET)

Herein we disclose the synthesis of 2‐fluoro‐2‐deoxyisosorbide 5‐mononitrate (2F‐IS‐5MN), a fluorinated analogue of the commonly prescribed vasodilator isosorbide 5‐mononitrate (IS‐5MN). X‐ray structural data for IS‐5MN and its C2‐epimeric congener IM‐5MN are presented together with structural data for 2F‐IS‐5MN. Radioisotope labeling of 2F‐IS‐5MN has, for the first time, allowed observation of the in vivo biodistribution of this organic nitrate by means of dynamic positron emission tomography (PET) in wild‐type mice.     

Spatial Variability in Secondary Metabolites of the Indo-Pacific Sponge Stylissa massa

Chemical diversity represents a measure of selective pressures acting on genotypic variability. In order to understand patterns of chemical ecology and biodiversity in the environment, it is necessary to enhance our knowledge of chemical diversity within and among species. Many sponges produce variable levels of secondary metabolites in response to diverse biotic and abiotic environmental factors. This study evaluated intra-specific variability in secondary metabolites in the common Indo-Pacific sponge Stylissa massa over various geographic scales, from local to ocean basin. Several major metabolites were quantified in extracts from sponges collected in American Samoa, Pohnpei, Saipan, and at several sites and depths in Guam. Concentrations of several of these metabolites varied geographically across the Pacific basin, with American Samoa and Pohnpei exhibiting the greatest differences, and Guam and Saipan more similar to each other. There were also significant differences in concentrations among different sites and depths within Guam. The crude extract of S. massa exhibited feeding deterrence against the omnivorous pufferfish Canthigaster solandri at natural concentrations, however, none of the isolated compounds was deterrent at the maximum natural concentrations observed, nor were mixtures of these compounds, thus emphasizing the need for bioassay-guided isolation to characterize specific chemical defenses. Antibacterial activity against a panel of ecologically relevant pathogens was minimal. Depth transplants, predator exclusion, and UV protection experiments were performed, but although temporal variability in compound concentrations was observed, there was no evidence that secondary metabolite concentration in S. massa was induced by any of these factors. Although the reasons behind the variability observed in the chemical constituents of S. massa are still in question, all sponges are not created equal from a chemical standpoint, and these studies provide further insights into patterns of chemical diversity within S. massa.     

Bacterial Catabolism of Biphenyls: Synthesis and Evaluation of Analogues

A series of alkylated 2,3‐dihydroxybiphenyls has been prepared on the gram scale by using an effective Directed ortho Metalation–Suzuki–Miyaura cross‐coupling strategy. These compounds have been used to investigate the substrate specificity of the meta‐cleavage dioxygenase BphC, a key enzyme in the microbial catabolism of biphenyl. Isolation and characterization of the meta‐cleavage products will allow further study of related processes, including the catabolism of lignin‐derived biphenyls.     

Synthesis and Evaluation of a Series of Bis(pentylpyridinium) Compounds as Antifungal Agents

A series of bis(4‐pentylpyridinium) compounds with a variety of spacers between the pyridinium headgroups was synthesised, and the antifungal activity of these compounds was investigated. Lengthening the alkyl spacer between the pentylpyridinium headgroups from 12 to 16 methylene units resulted in increased antifungal activity against C. neoformans and C. albicans, but also resulted in increased hemolytic activity and cytotoxicity against mammalian cells. However, inclusion of an ortho‐substituted benzene ring in the centre of the alkyl spacer resulted in decreased cytotoxicity and hemolytic activity, while maintaining antifungal potency. Replacement of the alkyl and aromatic‐containing spacers by more hydrophilic ethylene glycol groups resulted in a loss of antifungal activity. Some of the compounds inhibited fungal PLB1 activity, but the low correlation of this inhibition with antifungal potency indicates PLB1 inhibition is unlikely to be the predominant mode of antifungal action of this class of compounds, with preliminary studies suggesting they may act via disruption of fungal mitochondrial function.