Process conditions in X-ray lithography for the fabrication of devices with sub-micron feature sizes

This article describes the fabrication of polymer structures with lateral dimensions in the sub-micron regime using hard X-rays (λ_c ≈ 0.4 nm) from the electron storage ring ANKA. Spincoated polymethylmethacrylate (PMMA) grades have been analyzed with respect to development rates and contrast. The contrast has been determined to be constant over a wide dose regime but rapidly decreases for dose values below 1 kJ/cm³. Films with a thickness from 2 to 11 μm have been patterned using a high resolution X-ray mask consisting of 2 μm thick gold absorbers on a suspended 1 μm thick silicon nitride membrane. The fabrication of sub-micron X-ray lithography structures with feature sizes down to 400 nm is confined by the mechanical parameters of the resist material and the process conditions. Surface tension after development limits the achievable aspect ratio of isolated pillars and walls, depending on the actual resist height. PMMA structures have been successfully used as template for electroplating of 1 μm thick gold to demonstrate the fabrication capability of sub-micron scale metal parts.     

Experimental Modelling using Low Melting Point Metallic Melts: Relevance for Metallurgical Engineering

This paper describes model experiments with liquid metals of low melting point as an important tool to investigate the flow structure and related transport processes in melt flows being relevant for metallurgical applications. Three examples have been selected to demonstrate the benefit of such experiments, namely the electromagnetic stirring of a metallic melt in a pool, the directional solidification of Al‐Si alloys under the influence of an electromagnetically driven flow and the behaviour of a liquid metal bubble plume if a vertically travelling field is applied. Results of flow measurements are presented and the relevance for metallurgical processes is discussed.     

Citizens’ Adoption Behavior of Mobile Government (mGov): A Cross-Cultural Study

This study aims to address the paradigms of consumers’ adoption behavior for mobile government, posits the factors which pursue citizens’ intention to adopt mobile government services, and reveals the impact of cultural dimensions in perceiving driving factors of mobile government adoption. The mobile government adoption model was developed and tested among users of three different countries, namely Bangladesh, Canada, and Germany. The finding suggests the rationale that cross-cultural differences impact consumers’ perception of mobile government adoption behavior.     

Potential Energetic Plasticizers on the Basis of 2,2‐Dinitropropane‐1,3‐diol and 2,2‐Bis(azidomethyl)propane‐1,3‐diol

Different carboxylic acid derivatives of 2,2‐dinitropropane‐1,3‐diol (DNPD) and 2,2‐bis(azidomethyl)propane‐1,3‐diol (BAMP) were synthesized to investigate their suitability as energetic plasticizers. The syntheses were carried out using acyl chlorides of acetic, propionic, and butyric acid. The obtained products were characterized by elemental analysis, NMR, and IR spectroscopy. The energetic properties of the synthesized compounds were calculated on the basis of the computed heats of formation at the CBS‐4M level of theory using the EXPLO5 version 6.02 computer code. Investigations of physical stabilities were carried out using BAM drop hammer and friction tester. Low and high temperature behavior was determined by differential scanning calorimetry (DSC). The energetic and physical properties of the synthesized compounds were compared to the literature known energetic plasticizers N‐butyl nitratoethylnitramine (BuNENA) and diethylene glycol bis(azidoacetate) ester (DEGBAA). For analyzing the plasticizing abilities, mixtures of glycidyl azide polymer (GAP) and poly(3‐nitratomethyl‐3‐methyloxetan) (polyNIMMO) were prepared with both propionyl based compounds in different ratios and investigated regarding their glass transition temperatures and viscosity. Both compounds showed plasticizing effects in the range of BuNENA.     

The passage of homopolymeric RNA through small solid-state nanopores

Solid-state nanopores are widely acknowledged as tools with which to study local structure in biological molecules. Individual molecules are forced through a nanopore, causing a characteristic change in an ionic current that depends on the molecules' local diameter and charge distribution. Here, the translocation measurements of long (~5-30 kilobases) single-stranded poly(U) and poly(A) molecules through nanopores ranging from 1.5 to 8 nm in diameter are presented. Individual molecules are found to be able to cause multiple levels of conductance blockade upon traversing the pore. By analyzing these conductance blockades and their relative incidence as a function of nanopore diameter, it is concluded that the smallest conductance blockades likely correspond to molecules that translocate through the pore in predominantly head-to-tail fashion. The larger conductance blockades are likely caused by molecules that arrive at the nanopore entrance with many strands simultaneously. These measurements constitute the first demonstration that single-stranded RNA can be captured in solid-state nanopores that are smaller than the diameter of double-stranded RNA. These results further the understanding of the conductance blockades caused by nucleic acids in solid-state nanopores, relevant for future applications, such as the direct determination of RNA secondary structure.     

Incremental model-based estimation using geometric constraints

We present a model-based framework for incremental, adaptive object shape estimation and tracking in monocular image sequences. Parametric structure and motion estimation methods usually assume a fixed class of shape representation (splines, deformable superquadrics, etc.) that is initialized prior to tracking. Since the model shape coverage is fixed a priori, the incremental recovery of structure is decoupled from tracking, thereby limiting both processes in their scope and robustness. In this work, we describe a model-based framework that supports the automatic detection and integration of low-level geometric primitives (lines) incrementally. Such primitives are not explicitly captured in the initial model, but are moving consistently with its image motion. The consistency tests used to identify new structure are based on trinocular constraints between geometric primitives. The method allows not only an increase in the model scope, but also improves tracking accuracy by including the newly recovered features in its state estimation. The formulation is a step toward automatic model building, since it allows both weaker assumptions on the availability of a prior shape representation and on the number of features that would otherwise be necessary for entirely bottom-up reconstruction. We demonstrate the proposed approach on two separate image-based tracking domains, each involving complex 3D object structure and motion.     

Swiss Industrial Biocatalysis Consortium (SIBC)

Taking up the common challenges in biocatalysis, a group of industrialists decided to react with a bottom-up solution, and created the Swiss Industrial Biocatalysis Consortium (SIBC). The Swiss Industrial Biocatalysis Consortium is a pre-competitive working group to better implement and utilize existing know-how and resources in biocatalysis, and to influence and shape the economic and educational political environment. Recent examples of activities are outlined.     

Anforderungen an die Wärmedämmung der Gebäudehülle: ein Vergleich zwischen EnEV 2009 und EnEV 2007

Im Hinblick auf die Anforderungen an die Dämmung der Gebäudehülle hat sich ein Wechsel der Bezugsgrößen und Abhängigkeiten von der Energieeinsparverordnung (EnEV) 2007 zur EnEV 2009 vollzogen. Deshalb ist ein direkter Vergleich der beiden Vorschriften, zumindest bei Neubauten, nicht ohne weiteres möglich. Im folgenden Artikel wird die Möglichkeit eines allgemein gültigen Vergleichs der beiden Anforderungsniveaus untersucht. Daraus lassen sich für den Planer Schlüsse im Hinblick auf die Einhaltung der Anforderungen und deren Auswirkung auf den Entwurf und die Konstruktion ziehen. Abschnitt 1 behandelt dabei den Neubau von Wohngebäuden, Abschnitt 2 den Neubau von Nichtwohngebäuden und Abschnitt 3 die Bestandsgebäude. Comparison of the heat insulation requirements for building envelopes between EnEV 2007 and EnEV 2009. The heat insulation requirements for building envelopes depending on reference values and various conditions have been changed from EnEV 2007 (German Building Energy Conservation Ordinance) to EnEV 2009. Therefore, a direct comparison of both regulations is not possible, especially for new buildings. In this article the possibility of a generally valid comparison of both requirement levels is examined. Conclusions for the design of residential buildings, commercial buildings and refirbishment of existing buildings are given.     

4-Methylquinazoline is a Minor Component of the Male Sex Pheromone in <Emphasis Type="Italic">Nasonia vitripennis</Emphasis>

We identified 4-methylquinazoline (4-MeQ) as a minor component of the male sex pheromone of the parasitoid Nasonia vitripennis. Like the major components (4R,5R)- and (4R,5S)-5-hydroxy-4-decanolide (HDL), 4-MeQ is synthesized in the abdomen of males. At doses of 6 or 1 ng, 4-MeQ synergized the response of virgin females to the HDL-diastereomers in a still-air olfactometer, but was not attractive as a single component. 4-MeQ is also responsible for the characteristic medicinal odor of N. vitripennis males.     

A new method for manufacturing nanostructured electrodes on glass substrates

The present paper describes a new method for manufacturing a nanostructured porous layer of TiO₂ on a conducting glass substrate for use in a dye-sensitized photoelectrochemical cell. The method involves deposition of a layer of semiconductor particles onto a conducting substrate and compression of the particle layer to form a mechanically stable, electrically conducting, and porous nanostructured film at room temperature. Photoelectrochemical characteristics and morphology of the resulting nanostructured films are presented. The potential use of the new manufacturing method in the future applications of nanostructured systems is discussed.