Investigation into the evolution of corrosion product layer (CPL) of 1018 C-steel exposed to multiphase environment using FIB and EIS techniques

This communication reports into the effects of flow, fluid composition and the effectiveness of imidazoline inhibitors on the evolution and distribution of corrosion products on 1018 C-steel exposed to CO₂ corrosion. Focused ion beam technique was used to measure the thickness of the corrosion product layer (CPL), in contrast to the conventional techniques used to observe the cross-section of specimens. Morphological analysis using scanning electron microscopy revealed topographical variations on the surface with the change in the multiphase environment. The CPL was found to be more porous in nature with the presence of oil in the multiphase environment. Electrochemical impedance spectroscopy was also used in the present study to measure the corrosion rates and was subsequently correlated to the CPL evolution for 1018 C-steel in multiphase environment.     

Crack initiation in relation to the tool edge radius and cutting conditions in nanoscale cutting of silicon

In cutting of brittle materials, experimentally it was observed that there is a ductile–brittle transition when the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius of the zero rake angle. However, how the crack is initiated in the ductile–brittle mode transition as the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius has not been fully understood. In this study, the crack initiation in the ductile–brittle mode transition as the undeformed chip thickness is increased from smaller to larger than the tool cutting edge radius has been simulated using the Molecular Dynamics (MD) method on nanoscale cutting of monocrystalline silicon with a non-zero edge radius tool, from which, for the first time, a peak deformation zone in the chip formation zone has been found in the transition from ductile mode to brittle mode cutting. The results show that as the undeformed chip thickness is larger than the cutting edge radius, in the chip formation zone there is a peak deformation depth in association with the connecting point of tool edge arc and the rake face, and there is a crack initiation zone in the undeformed workpiece next to the peak deformation zone, in which the material is tensile stressed and the tensile stress is perpendicular to the direction from the connecting point to the peak. As the undeformed chip thickness is smaller than the cutting edge radius, there is no deformation peak in the chip formation zone, and thus there is no crack initiation zone formed in the undeformed workpiece. This finding explains well the ductile–brittle transition as the undeformed chip thickness increases from smaller to larger than the tool cutting edge radius.     

A scalable hybrid decision system (HDS) for Roman word recognition using ANN SVM: study case on Malay word recognition

An off-line handwriting recognition (OFHR) system is a computerized system that is capable of intelligently converting human handwritten data extracted from scanned paper documents into an equivalent text format. This paper studies a proposed OFHR for Malaysian bank cheques written in the Malay language. The proposed system comprised of three components, namely a character recognition system (CRS), a hybrid decision system and lexical word classification system. Two types of feature extraction techniques have been used in the system, namely statistical and geometrical. Experiments show that the statistical feature is reliable, accessible and offers results that are more accurate. The CRS in this system was implemented using two individual classifiers, namely an adaptive multilayer feed-forward back-propagation neural network and support vector machine. The results of this study are very promising and could generalize to the entire Malay lexical dictionary in future work toward scaled-up applications.     

An efficient and noise resistive selective image encryption scheme for gray images based on chaotic maps and DNA complementary rules

A novel image encryption algorithm in streaming mode is proposed which exhaustively employs an entire set of DNA complementary rules alongwith one dimensional chaotic maps. The proposed algorithm is highly efficient due to encrypting the subset of digital image which contains 92.125 % of information. DNA addition operation is carried out on this MSB part. The core idea of the proposed scheme is to scramble the whole image by means of piecewise linear chaotic map (PWLCM) followed by decomposition of image into most significant bits (MSB) and least significant bits (LSB). The logistic sequence is XORed with the decoded MSB and LSB parts separately and finally these two parts are combined to get the ciphered image. The parameters for PWLCM, logistic map and selection of different DNA rules for encoding and decoding of both parts of an image are derived from 128-bit MD5 hash of the plain image. Simulated experimental results in terms of quantitative and qualitative ways prove the encryption quality. Efficiency and robustness against different noises make the proposed cipher a good candidate for real time applications.     

What can possibly go wrong? Anticipatory work in space operations

This paper explores how different forms of anticipatory work contribute to reliability in high-risk space operations. It is based on ethnographic field work, participant observation and interviews supplemented with video recordings from a control room responsible for operating a microgravity greenhouse at the International Space Station (ISS). Drawing on examples from different stages of a biological experiment on the ISS, we demonstrate how engineers, researchers and technicians work to anticipate and proactively mitigate possible problems. Space research is expensive and risky. The experiments are planned over the course of many years by a globally distributed network of organizations. Owing to the inaccessibility of the ISS, every trivial detail that could possibly cause a problem is subject to scrutiny. We discuss what we label anticipatory work: practices constituted of an entanglement of cognitive, social and technical elements involved in anticipating and proactively mitigating everything that might go wrong. We show how the nature of anticipatory work changes between planning and the operational phases of an experiment. In the planning phase, operators inscribe their anticipation into technology and procedures. In the operational phase, we show how troubleshooting involves the ability to look ahead in the evolving temporal trajectory of the ISS operations and to juggle pre-planned fixes along these trajectories. A key objective of this paper is to illustrate how anticipation is shared between humans and different forms of technology. Moreover, it illustrates the importance of including considerations of temporality in safety and reliability research.     

Objective evaluation of speech dysfluencies using wavelet packet transform with sample entropy

Dysfluency and stuttering are a break or interruption of normal speech such as repetition, prolongation, interjection of syllables, sounds, words or phrases and involuntary silent pauses or blocks in communication. Stuttering assessment through manual classification of speech dysfluencies is subjective, inconsistent, time consuming and prone to error. This paper proposes an objective evaluation of speech dysfluencies based on the wavelet packet transform with sample entropy features. Dysfluent speech signals are decomposed into six levels by using wavelet packet transform. Sample entropy (SampEn) features are extracted at every level of decomposition and they are used as features to characterize the speech dysfluencies (stuttered events). Three different classifiers such as k-nearest neighbor (kNN), linear discriminant analysis (LDA) based classifier and support vector machine (SVM) are used to investigate the performance of the sample entropy features for the classification of speech dysfluencies. 10-fold cross validation method is used for testing the reliability of the classifier results. The effect of different wavelet families on the classification performance is also performed. Experimental results demonstrate that the proposed features and classification algorithms give very promising classification accuracy of 96.67% with the standard deviation of 0.37 and also that the proposed method can be used to help speech language pathologist in classifying speech dysfluencies.     

Buoyancy convection in a cavity with mutually orthogonal heated plates

Buoyancy driven convection in a square cavity induced by two mutually orthogonal arbitrarily placed heated thin plates is studied numerically under isothermal and isoflux boundary conditions. The flow is assumed to be two-dimensional. The coupled governing equations were solved by the finite difference method using the Alternating Direction Implicit technique and Successive Over Relaxation method. The steady state results are depicted in terms of streamline and isotherm plots. It is found that the resulting convection pattern is stronger for the isothermal boundary condition. A better overall heat transfer can be achieved by placing one of the plates far away from the center of the cavity for isothermal boundary condition and near the center of the cavity for isoflux boundary condition.     

直觉线性μ-演算中的合成推理

讨论了以基于前缀封闭集合的Heyting代数的直觉解释的线性μ-演算(IμTL)作为描述“假设-保证”的逻辑基础的问题,提出了一个基于IμTL的“假设-保证”规则.该规则比往常应用线性时序逻辑(LTL)作为规范语言的那些规则具有更好的表达能力,扩展了对形如“always ?”等安全性质的“假设-保证”的范围,具备更一般的“假设-保证”推理能力及对循环推理的支持.     

A new approach to water quality modelling and environmental decision support systems

The concepts and technology of environmental decision support systems (EDSS) have developed considerably over recent decades, although core concepts such as flexibility and adaptability within a changing decision environment remain paramount. Much recent EDSS theory has focussed on model integration and re-use in decision support system (DSS) tools and for design and construction of ‘DSS generators’. Many current specific DSS have architectures, tools, models and operational characteristics that are either fixed or difficult to change in the face of changing management needs. This paper reports on development and deployment of an EDSS that encompasses a new approach to DSS tools, generators and specific DSS applications. The system, named E2, is built upon a conceptualisation of terrestrial and aquatic environmental systems that has resulted in a robust and flexible system architecture. The architecture provides a set of base classes to represent fundamental concepts, and which can be instantiated and combined to form DSS generators of varying complexity. A DSS generator is described within which system users are able to select and link models, data, analysis tools and reporting tools to create specific DSS for particular problems, and for which new models and tools can be created and, through software reflection (introspection), discovered to provide expanded capability where required. This system offers a new approach within which environmental systems can be described in the form of specific DSS at a scale and level of complexity suited to the problems and needs of decision makers.