Impact of hydrogen concentrations on the impedance spectroscopic behavior of Pd-sensitized ZnO nanorods

ZnO nanorods were synthesized using a low-cost sol-gel spin coating technique. The synthesized nanorods were consisted of hexagonal phase having c-axis orientation. SEM images reflected perpendicular ZnO nanorods forming bridging network in some areas. The impact of different hydrogen concentrations on the Pd-sensitized ZnO nanorods was investigated using an impedance spectroscopy (IS). The grain boundary resistance (R_gb) significantly contributed to the sensing properties of hydrogen gas. The boundary resistance was decreased from 11.95 to 3.765 kΩ when the hydrogen concentration was increased from 40 to 360 ppm. IS gain curve showed a gain of 6.5 for 360 ppm of hydrogen at room temperature. Nyquist plot showed reduction in real part of impedance at low frequencies on exposure to different concentrations of hydrogen. Circuit equivalency was investigated by placing capacitors and resistors to identify the conduction mechanism according to complex impedance Nyquist plot. Variations in nanorod resistance and capacitance in response to the introduction of various concentrations of hydrogen gas were obtained from the alternating current impedance spectra.     

Mild hydrocracking of 1-methyl naphthalene (1-MN) over alumina modified zeolite

The catalytic activity and life of the NiMoS supported on alumina–USY zeolite (physical mixture of alumina and USY (NMAZ), USY zeolite coated with alumina (NMACZ-2)) were compared in the hydrocracking of 1-methyl naphthalene by a single run at the several reaction temperatures between 360 and 400 °C as well as repeated runs at 360 °C. The relative activity of NMAZ is slightly higher after 1 h at all reaction temperatures, but was lower after 2 h at reaction temperatures above 380 °C. The preference of NMACZ-2 became distinct and definite by further increasing the reaction time at all reaction temperatures. Too long reaction time, particularly at higher reaction temperature, decreased the yield of (alkyl)benzenes, indicating the significant progress of the successive reactions. Thus, the highest yield of alkyl(benzenes) of about 97% was obtained over NMACZ-2 after 4 h at 380–390 °C. This was much less than the yield of about 82% obtained over NMAZ after 4 h at 370 °C. Ten repeated runs at 360 °C for 6 h resulted in marked decrease of yield over NMAZ from 73% to 64%, while the decrease in yield over NMACZ-2 was only from about 80% to 78%. The decrease of catalytic activity appears to reflect the coke formation on the USY which occurs on the naked acidic site of the substrate, which are rather isolated from the NiMoS on alumina. In contrast, alumina-coated support keeps USY underneath the alumina, which carries NiMoS and acidic sites on the same surface. The acidity of surface alumina is moderated by the underneath USY. The adequate acidity of the neighboring NiMoS and high hydrogenation activity provide a good balance resulting in an excellent catalytic activity and life of NiMoS supported on alumina-coated USY zeolite.     

Removal of toxic aqueous ions using amorphous AlPO4

Aluminium phosphate (AlPO₄) was characterized using X-ray diffractometry (XRD), Fourier Transform infrared (FTIR), point of zero charge (PZC) and dissolution studies. XRD showed the sample to be amorphous, FTIR confirmed the presence of OH groups on the surface and PZC was determined at pH 3.45. The dissolution study illustrated a decrease in dissolution with an increase in the pH. Potentiometric titration data were fit to the Gaines–Thomas equation, which showed that AlPO₄ is a weakly acidic ion exchanger. Sorption studies were carried out at pH 4–6 and temperatures 293–323 K. The uptake of metal ions was observed to increase with an increase in the pH and temperature. The surface selectivity towards metal ions was found in the order Pb²⁺> Cu²⁺> Cd²⁺. Sorption data were fit to the new equation derived from the proposed mechanism for metal ion uptake. Various parameters such as stoichiometry of the surface H⁺ ion release, equilibrium constant, standard enthalpy, entropy and free energy changes were evaluated from the plots. The values of all these parameters were found to be closely related to the values reported in the literature.     

Corrosion protection of commercial steel using stainless steel coatings deposited by Cathodic Arc Plasma Deposition technique

The commercial steel AISI 1010 was coated with AISI 316L steel using Cathodic Arc Plasma Deposition (CAPD) technique. The coatings were deposited in vacuum and in the presence of nitrogen, acetylene and mixture of the two as reactive gases. The coatings were deposited as a function of time while other parameters remained constant. The coatings 0.75 to 1.3 μm thick were adherent and amorphous. The aqueous corrosion properties of the coated samples in 3.5 wt % NaCl solution were studied by Tafel, cyclic and potentiodynamic polarization measurements. The derived corrosion parameters were then compared among the various uncoated and coated samples. The study revealed that the coated samples were more corrosion resistant than the uncoated one. Similarly, the samples coated in the nitrogen + acetylene mixture atmosphere were more corrosion resistant than the samples coated in only nitrogen and acetylene atmospheres. The corrosion parameters were also compared as a function of coating time to ascertain best coating thickness.     

Biodegradable composites based on starch/EVOH/glycerol blends and coconut fibers

Unripe coconut fibers were used as fillers in a biodegradable polymer matrix of starch/ethylene vinyl alcohol (EVOH)/glycerol. The effects of fiber content on the mechanical, thermal, and structural properties were evaluated. The addition of coconut fiber into starch/EVOH/glycerol blends reduced the ductile behavior of the matrix by making the composites more brittle. At low fiber content, blends were more flexible, with higher tensile strength than at higher fiber levels. The temperature at the maximum degradation rate slightly shifted to lower values as fiber content increased. Comparing blends with and without fibers, there was no drastic change in melt temperature of the matrix with increase of fiber content, indicating that fibers did not lead to significant changes in crystalline structure. The micrographs of the tensile fractured specimens showed a large number of holes resulting from fiber pull‐out from the matrix, indicating poor adhesion between fiber and matrix. Although starch alone degraded readily, starch/EVOH/glycerol blends exhibited much slower degradation in compost. Composites produced 24.4–28.8% less CO₂ compared with starch in a closed‐circuit respirometer. Addition of increasing amount of fiber in starch/EVOH/glycerol composite had no impact on its biodegradation. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Current Understandings on Magnesium Deficiency and Future Outlooks for Sustainable Agriculture

The productivity of agricultural produce is fairly dependent on the availability of nutrients and efficient use. Magnesium (Mg²⁺) is an essential macronutrient of living cells and is the second most prevalent free divalent cation in plants. Mg²⁺ plays a role in several physiological processes that support plant growth and development. However, it has been largely forgotten in fertilization management strategies to increase crop production, which leads to severe reductions in plant growth and yield. In this review, we discuss how the Mg²⁺ shortage induces several responses in plants at different levels: morphological, physiological, biochemical and molecular. Additionally, the Mg²⁺ uptake and transport mechanisms in different cellular organelles and the role of Mg²⁺ transporters in regulating Mg²⁺ homeostasis are also discussed. Overall, in this review, we critically summarize the available information about the responses of Mg deficiency on plant growth and development, which would facilitate plant scientists to create Mg²⁺-deficiency-resilient crops through agronomic and genetic biofortification.     

Preliminary Structural Data Revealed That the SARS-CoV-2 B.1.617 Variant's RBD Binds to ACE2 Receptor Stronger Than the Wild Type to Enhance the Infectivity

The evolution of new SARS-CoV-2 variants around the globe has made the COVID-19 pandemic more worrisome, further pressuring the health care system and immunity. Novel variations that are unique to the receptor-binding motif (RBM) of the receptor-binding domain (RBD) spike glycoprotein, i. e. L452R-E484Q, may play a different role in the B.1.617 (also known as G/452R.V3) variant's pathogenicity and better survival compared to the wild type. Therefore, a thorough analysis is needed to understand the impact of these mutations on binding with host receptor (RBD) and to guide new therapeutics development. In this study, we used structural and biomolecular simulation techniques to explore the impact of specific mutations (L452R-E484Q) in the B.1.617 variant on the binding of RBD to the host receptor ACE2. Our analysis revealed that the B.1.617 variant possesses different dynamic behaviours by altering dynamic-stability, residual flexibility and structural compactness. Moreover, the new variant had altered the bonding network and structural-dynamics properties significantly. MM/GBSA technique was used, which further established the binding differences between the wild type and B.1.617 variant. In conclusion, this study provides a strong impetus to develop novel drugs against the new SARS-CoV-2 variants.     

Experimental and Established Oximes as Pretreatment before Acute Exposure to Azinphos-Methyl

Poisoning with organophosphorus compounds (OPCs) represents an ongoing threat to civilians and rescue personal. We have previously shown that oximes, when administered prophylactically before exposure to the OPC paraoxon, are able to protect from its toxic effects. In the present study, we have assessed to what degree experimental (K-27; K-48; K-53; K-74; K-75) or established oximes (pralidoxime, obidoxime), when given as pretreatment at an equitoxic dosage of 25% of LD₀₁, are able to reduce mortality induced by the OPC azinphos-methyl. Their efficacy was compared with that of pyridostigmine, the only FDA-approved substance for such prophylaxis. Efficacy was quantified in rats by Cox analysis, calculating the relative risk of death (RR), with RR=1 for the reference group given only azinphos-methyl, but no prophylaxis. All tested compounds significantly (p ≤ 0.05) reduced azinphos-methyl-induced mortality. In addition, the efficacy of all tested experimental and established oximes except K-53 was significantly superior to the FDA-approved compound pyridostigmine. Best protection was observed for the oximes K-48 (RR = 0.20), K-27 (RR = 0.23), and obidoxime (RR = 0.21), which were significantly more efficacious than pralidoxime and pyridostigmine. The second-best group of prophylactic compounds consisted of K-74 (RR = 0.26), K-75 (RR = 0.35) and pralidoxime (RR = 0.37), which were significantly more efficacious than pyridostigmine. Pretreatment with K-53 (RR = 0.37) and pyridostigmine (RR = 0.52) was the least efficacious. Our present data, together with previous results on other OPCs, indicate that the experimental oximes K-27 and K-48 are very promising pretreatment compounds. When penetration into the brain is undesirable, obidoxime is the most efficacious prophylactic agent already approved for clinical use.     

Comparison of Repeated Doses of C-kit-Positive Cardiac Cells versus a Single Equivalent Combined Dose in a Murine Model of Chronic Ischemic Cardiomyopathy

Using a murine model of chronic ischemic cardiomyopathy caused by an old myocardial infarction (MI), we have previously found that three doses of 1 × 10⁶ c-kit positive cardiac cells (CPCs) are more effective than a single dose of 1 × 10⁶ cells. The goal of this study was to determine whether the beneficial effects of three doses of CPCs (1 × 10⁶ cells each) can be fully replicated by a single combined dose of 3 × 10⁶ CPCs. Mice underwent a 60-min coronary occlusion; after 90 days of reperfusion, they received three echo-guided intraventricular infusions at 5-week intervals: (1) vehicle × 3; (2) one combined dose of CPCs (3 × 10⁶) and vehicle × 2; or (3) three doses of CPCs (1 × 10⁶ each). In the combined-dose group, left ventricular ejection fraction (LVEF) improved after the 1st CPC infusion, but not after the 2nd and 3rd (vehicle) infusions. In contrast, in the multiple-dose group, LVEF increased after each CPC infusion; at the final echo, LVEF averaged 35.2 ± 0.6% (p < 0.001 vs. the vehicle group, 27.3 ± 0.2%). At the end of the study, the total cumulative change in EF from pretreatment values was numerically greater in the multiple-dose group (6.6 ± 0.6%) than in the combined-dose group (4.8 ± 0.8%), although the difference was not statistically significant (p = 0.08). Hemodynamic studies showed that several parameters of LV function in the multiple-dose group were numerically greater than in the combined-dose group (p = 0.08 for the difference in LVEF). Compared with vehicle, cardiomyocyte cross-sectional area was reduced only in the multiple-dose group (−32.7%, 182.6 ± 15.1 µm² vs. 271.5 ± 27.2 µm², p < 0.05, in the risk region and −28.5%, 148.5 ± 12.1 µm² vs. 207.6 ± 20.5 µm², p < 0.05, in the noninfarcted region). LV weight/body weight ratio and LV weight/tibia length ratios were significantly reduced in both cell treated groups vs. the vehicle group, indicating the attenuation of LV hypertrophy; however, the lung weight/body weight ratio was significantly reduced only in the multiple-dose group, suggesting decreased pulmonary congestion. Taken together, these results indicate that in mice with chronic ischemic cardiomyopathy, the beneficial effects of three doses of CPCs on LV function and hypertrophy cannot be fully replicated with a single dose, notwithstanding the fact that the total number of cells delivered with one or three doses is the same. Thus, it is the multiplicity of doses, and not the total number of cells, that accounts for the superiority of the repeated-dose paradigm. This study supports the idea that the efficacy of cell therapy in heart failure can be augmented by repeated administrations.     

On Structural,Optical, and Electrical Properties of Chromium Oxide Cr2O3 Thin Film for Applications

Protection of Metals and Physical Chemistry of Surfaces - Chromium oxide thin films were grown on Al2O3 substrates by ablating a pure Cr2O3 target using a KrF excimer laser. The energy density on...