Soft Matter Technology at KIT: Chemical Perspective from Nanoarchitectures to Microstructures

Bioinspiration has emerged as an important design principle in the rapidly growing field of materials science and especially its subarea, soft matter science. For example, biological cells form hierarchically organized tissues that not only are optimized and designed for durability, but also have to adapt to their external environment, undergo self‐repair, and perform many highly complex functions. Being able to create artificial soft materials that mimic those highly complex functions will enable future materials applications. Herein, soft matter technologies that are used to realize bioinspired material structures are described, and potential pathways to integrate these into a comprehensive soft matter research environment are addressed. Solutions become available because soft matter technologies are benefitting from the synergies between organic synthesis, polymer chemistry, and materials science.     

Structural and optical characterization of CuInSe2 films deposited by hot wall vacuum evaporation method

Copper indium diselenide (CuInSe₂) compound was prepared by direct reaction of high-purity elemental copper, indium and selenium. CuInSe₂ thin films were deposited onto well-cleaned glass substrates by a hot wall deposition technique using quartz tubes of different lengths (0.05, 0.07, 0.09, 0.11 and 0.13 m). X-ray diffraction studies revealed that all the deposited films are polycrystalline in nature and exhibit chalcopyrite structure. The crystallites were found to have a preferred orientation along the (1 1 2) direction. Micro-structural parameters of the films such as grain size, dislocation density, tetragonal distortion and strain have been determined. The grain sizes in the films were in the range of 65-250 nm. As the tube length increases up to 0.11 m the grain size in the deposited films increases, but the strain decreases. The film deposited using the 0.13 m long tube has smaller grain size and more strain. CuInSe₂ thin films coated using a tube length of 0.11 m were found to be highly crystalline when compared to the films coated using other tube lengths; it has also been found that films possess the same composition (Cu/In=1.015) as that of the bulk. Scanning electron microscope analysis indicates that the films are polycrystalline in nature. Structural parameters of CuInSe₂ thin films deposited under higher substrate temperatures were also studied and the results are discussed. The optical absorption coefficient of CuInSe₂ thin films has been estimated as 10⁴ cm⁻¹ (around 1050 nm). The direct band gap of CuInSe₂ thin films was also determined to be between 1.018 and 0.998 eV.     

Dissolved trace element concentrations in the East River-Long Island Sound system: relative importance of autochthonous versus allochthonous sources

Dissolved trace metal (Ag, Cd, Cu, Fe, Ni, Pb, and Zn), inorganic nutrient (NO3, NH4, PO4, H4SiO4), and DOC concentrations were measured at 43 stations during low (July 2000) and high (April 2001) river discharge conditions in surface waters of Long Island Sound (LIS). To evaluate the impact of fluvial sources to the total metal budget of the sound, samples were collected from major tributaries discharging into LIS (Thames, Quinnipiac, Housatonic, Connecticut, and East Rivers). To compare LIS with other coastal embayments, samples were also collected from five LIS coastal embayments (Manhassett Bay, Huntington Harbor, Oyster Bay, Hempstead Harbor, and Port Jefferson Harbor), which are monitored by the U.S. National Status and Trends Program. Metal and nutrient distributions identified two biogeochemical regimes within LIS: an area of relatively high nutrient and metal concentrations in the East River/Narrows region in western LIS and an area in the eastern region of the sound that had comparatively lower concentrations. Mass balance estimates indicated that, during low flow conditions, the East River was the dominant allochthonous source of most trace metals (Ag, Cd, Cu, Ni, Zn) and inorganic nutrients (NO3 and PO4); during high flow conditions, the most influential source of these constituents was the Connecticut River. Mass balance estimates also evidenced a large autochthonous source of Cu, Ni, and Zn, as their spatial distributions displayed elevated concentrations away from point sources such as the East River. Principal component analysis suggested that metal and nutrient distributions in the LIS system were influenced by different seasonal processes: remobilization from contaminated sediments, anthropogenic inputs from sewage discharges and phytoplankton scavenging during the spring freshet, and benthic remobilization during summer conditions.     

Solvent-deficient synthesis of cerium oxide: Characterization and kinetics

The reaction mechanism and kinetics of CeO₂ synthesis using a solvent-deficient method are investigated by simultaneous thermogravimetric analysis (TGA)/differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The decomposition process of the cerium(III) nitrate hexahydrate and ammonium bicarbonate precursor mixture with four observed stages is monitored using TGA/DSC measurements in a nonisothermal regime with heating rates of 5, 10, 15 and 20?°C min^?1. The proposed mechanism indicates a complex synthesis with several parallel reactions, some of which occur at room temperature. A detailed kinetic analysis is performed using isoconversional (expanded Friedman, modified Coats-Redfern and Kissinger) and model fitting (N^th order and nucleation and growth models) methods. The first three stages are best described by the N^th order model with activation energy values of 21, 53 and 90?kJ?mol^?1. The last stage, during which ammonium nitrate decomposition occurs, is best fit by the nucleation and growth model and has an activation energy of 129?kJ?mol^?1. The proposed mechanism, supported by the kinetic analysis in our study, indicates that CeO₂ has already formed before the reaction reaches 200?°C. The average crystallite size of CeO₂ synthesized at 300?°C, which was calculated from the XRD measurements and observed in the SEM and TEM data, is between 10 and 20?nm.     

Tannic acid coating and in situ deposition of silver nanoparticles to improve the antifouling properties of an ultrafiltration membrane

The construction of antifouling membranes has been a desirable approach for addressing membrane-fouling issues in the ultrafiltration (UF) process. Antifouling means antiadhesive and antimicrobial; however, few researchers have achieved both properties in a facile and effective manner. In this article, we report a direct tannic acid (TA) coating method combined with the in situ deposition of silver nanoparticles (Ag NPs); this was used to improve the antifouling properties of a positively charged polymeric UF membrane. The results show that the TA–Ag NP modified membranes showed improved protein resistance (flux recovery rate = 71.2% after modification vs 17.8% before modification) and less attachment of bacteria (Escherichia coli K1) on the membrane surface and reduced cell viability in the resulting bacterial suspension (reduced by ≥90%) because of the combined antimicrobial properties of both the TA and Ag NPs. This indicated that our modification method was promising for UF membrane antifouling applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47314.     

基于SOM-RBF神经网络的COD软测量方法

污水处理是一个复杂的非线性过程,化学需氧量（chemical oxygen demand,COD）是评价污水处理效果的关键指标之一。COD的传统测量方法耗时长、成本高,基于传统神经网络的软测量方法提高了COD参数的测量速度但精度较差。针对这些问题,设计一种结合自组织特征映射 (self-organizing map, SOM)和径向基函数(radial basis function, RBF)神经网络的COD参数软测量方法。该方法利用SOM网络聚类数据样本,根据所得聚类结果确定RBF网络的隐层节点数及节点的数据中心,综合提高RBF网络的收敛速度和拟合精度。利用污水处理厂部分水样数据建立COD软测量模型,模型仿真和硬件在线测试结果表明,相对于传统的BP、RBF等网络,基于SOM-RBF神经网络的COD软测量方法测量时间短、预测精度较高,具有较为广阔的应用前景。     

A new Lagrangian decomposition approach applied to the integration of refinery planning and crude-oil scheduling

The aim of this paper is to introduce a methodology to solve a large-scale mixed-integer nonlinear program (MINLP) integrating the two main optimization problems appearing in the oil refining industry: refinery planning and crude-oil operations scheduling. The proposed approach consists of using Lagrangian decomposition to efficiently integrate both problems. The main advantage of this technique is to solve each problem separately. A new hybrid dual problem is introduced to update the Lagrange multipliers. It uses the classical concepts of cutting planes, subgradient, and boxstep. The proposed approach is compared to a basic sequential approach and to standard MINLP solvers. The results obtained on a case study and a larger refinery problem show that the new Lagrangian decomposition algorithm is more robust than the other approaches and produces better solutions in reasonable times.     

Characterisation of carbon blacks produced by solar thermal dissociation of methane

Solar methane dissociation appears as a possible route toward a hydrogen-based economy. The competitiveness of the process strongly depends on the carbon black properties and economic value. At CNRS-PROMES, a 50 kW tubular solar reactor was developed to produce carbon black and hydrogen from methane. The reaction was carried out in a graphite receiver crossed by seven graphite tubes heated up by concentrated solar radiations at the 1 MW CNRS solar furnace. The temperatures ranged between 1608 K and 1928 K and the methane flow-rates varied from 10.5 to 21 NL/min. Total methane dissociation was reached with hydrogen yield higher than 80% and the carbon yield was drastically affected by the acetylene by-product. The carbon samples were analysed in detail and their properties were compared to a commercial conductive grade carbon black. Transmission electron microscopy showed primary particles of 10–70 nm diameter. The crystallinity of the samples was characterised by Raman spectroscopy. It was also possible to correlate the specific surface area with the reaction temperature and with the concentrations of residual methane and of the acetylene by-product. The resistivity and the structure of the agglomerates were determined by simultaneous measurements of the conductivity and the density under compression.     

N‐Methyl‐Substituted Fluorescent DAG–Indololactone Isomers Exhibit Dramatic Differences in Membrane Interactions and Biological Activity

N‐methyl‐substituted diacylglycerol–indololactones (DAG–indololactones) are newly synthesized effectors of protein kinase C (PKC) isoforms and exhibit substantial selectivity between RasGRP3 and PKCα. We present a comprehensive analysis of membrane interactions and biological activities of several DAG–indololactones. Translocation and binding activity assays underline significant variations between the PKC translocation characteristics affected by the ligands as compared to their binding activities. In parallel, the fluorescent properties of the ligands were employed for analysis of their membrane association profiles. Specifically, we found that a slight change in the linkage to the indole ring resulted in significant differences in membrane binding and association of the DAG–indololactones with lipid bilayers. Our analysis shows that seemingly small structural modifications of the hydrophobic regions of these biomimetic PKC effectors contribute to pronounced modulation of membrane interactions of the ligands.     

Towards Diastereomeric Pure Salts with Antisolvent Methods

Chiral molecules, especially enantiomers and diastereomers of purity > 99 %, present a significant market share within the chemical, pharmaceutical, and flavor industries. Antisolvent precipitations, both batch and semicontinuous operations to serve the current trends in flow chemistry were demonstrated to be environmentally benign and efficient tools in achieving high optical purities. Although salts are known to be insoluble in supercritical CO₂, instabilities of the nascent salts were detected and applied for increasing efficiency. Diastereomeric excess values of the crystalline products exceeded 99 % in maximum of three consecutive steps both by repeated resolution with half molar equivalent of the amine to the acid and by direct recrystallization of the salts.