High‐Temperature Neutron Diffraction,Raman Spectroscopy,and First‐Principles Calculations of Ti3SnC2 and Ti2SnC

Herein, we report—for the first time—on the additive‐free bulk synthesis of Ti₃SnC₂. A detailed experimental study of the structure of the latter together with a secondary phase, Ti₂SnC, is presented through the use of X‐ray diffraction (XRD), and high‐resolution transmission microscopy (HRTEM). A previous sample of Ti₃SnC₂, made using Fe as an additive and Ti₂SnC as a secondary phase, was studied by high‐temperature neutron diffraction (HTND) and XRD. The room‐temperature crystallographic parameters of the two MAX phases in the two samples are quite similar. Based on Rietveld analysis of the HTND data, the average linear thermal expansion coefficients of Ti₃SnC₂ in the a and c directions were found to be 8.5 (2)·10^?6 K^?1 and 8.9 (1)·10^?6 K^?1, respectively. The respective values for the Ti₂SnC phase are 10.1 (3)·10^?6 K^?1 and 10.8 (6)·10^?6 K^?1. Unlike other MAX phases, the atomic displacement parameters of the Sn atoms in Ti₃SnC₂ are comparable to those of the Ti and C atoms. When the predictions of the atomic displacement parameters obtained from density functional theory are compared to the experimental results, good quantitative agreement is found for the Sn atoms. In the case of the Ti and C atoms, the agreement is more qualitative. We also used first principles to calculate the elastic properties of both Ti₂SnC and Ti₃SnC₂ and their Raman active modes. The latter are compared to experiment and the agreement was found to be good.     

Identification of Reference Genes for RT-qPCR Data Normalization in Cannabis sativa Stem Tissues

Gene expression profiling via quantitative real-time PCR is a robust technique widely used in the life sciences to compare gene expression patterns in, e.g., different tissues, growth conditions, or after specific treatments. In the field of plant science, real-time PCR is the gold standard to study the dynamics of gene expression and is used to validate the results generated with high throughput techniques, e.g., RNA-Seq. An accurate relative quantification of gene expression relies on the identification of appropriate reference genes, that need to be determined for each experimental set-up used and plant tissue studied. Here, we identify suitable reference genes for expression profiling in stems of textile hemp (Cannabis sativa L.), whose tissues (isolated bast fibres and core) are characterized by remarkable differences in cell wall composition. We additionally validate the reference genes by analysing the expression of putative candidates involved in the non-oxidative phase of the pentose phosphate pathway and in the first step of the shikimate pathway. The goal is to describe the possible regulation pattern of some genes involved in the provision of the precursors needed for lignin biosynthesis in the different hemp stem tissues. The results here shown are useful to design future studies focused on gene expression analyses in hemp.     

Synthesis and Microstructural Characterization of Substoichiometric Ti2Al(CxNy) Solid Solutions and Related Ti2AlCx and Ti2AlN End‐Members

Ti, TiC, Al and AlN powders were mixed to synthesize Ti₂Al(C_xN_y) (x + y < 1) solid solutions, Ti₂AlC_x (x < 1) and Ti₂AlN‐related end‐members by hot isostatic pressing at 1400°C/80 MPa for 4 h. For the pure carbides, it is demonstrated that single‐phased samples can only be obtained when about 15% of substoichiometry on the carbon site is applied. Such a result likely implies that Ti₂AlC_x can only exist in a narrow range of carbon composition. Ti₂AlN nitride can be synthesized with y = 1. Assuming that vacancy content varies linearly from 0 to 0.15 going from Ti₂AlN to Ti₂AlC_0.85 in the solid solutions, element concentrations have been calculated to synthesize different solid solutions. Thus, it is demonstrated that single‐phased and fully dense Ti₂Al(C_0.23N_0.71), Ti₂Al(C_0.45N_0.45), and Ti₂Al(C_0.66N_0.22) carbonitrides can be synthesized.     

Improvement of corrosion protection of steel by incorporation of a new phosphonated fatty acid in a phosphorus-containing polymer coating obtained by UV curing

Six formulations containing diacrylate monomers (from 89 to 92.5% (w/w)) as well as a phosphonated methacrylate monomer (from 1 to 10% (w/w)) were prepared. All formulations were UV-cured and the corrosion performance of the resulting coatings applied onto a steel substrate was assessed by electrochemical impedance spectroscopy (EIS). It was first shown that the coatings containing phosphonic acid methacrylate (MAPC1(OH)₂) instead of methacrylate phosphonic dimethyl ester (MAPC1) presented higher corrosion protection related to the strong adhesive properties of phosphonic acid on the metal substrate. A minimum MAPC1(OH)₂ content of 2.5% was determined to provide the highest impedance values (best efficiency). Then, a new bio-based compound, i.e. phosphonic acid-bearing oleic acid (phosphonated fatty acid), was synthesized and added as an inhibitor to the formulations. In the presence of this compound, the corrosion protection was notably improved. The beneficial effect of phosphonated fatty acid was explained by its inhibitive action at the steel/coating interface and by the improvement of the barrier properties.     

Understanding of the annealing temperature impact on ion implanted bifacial n‐type solar cells to reach 20.3% efficiency

Ion implantation has the advantage of being a unidirectional doping technique. Unlike gaseous diffusion, this characteristic highlights strong possibilities to simplify solar cell process flows. The use of ion implantation doping for n‐type PERT bifacial solar cells is a promising process, but mainly if it goes with a unique co‐annealing step to activate both dopants and to grow a SiO₂ passivation layer. To develop this process and our SONIA cells, we studied the impact of the annealing temperature and that of the passivation layers on the electrical quality of the implanted B‐emitter and P‐BSF. A high annealing temperature (above 1000 °C) was necessary to fully activate the boron atoms and to anneal the implantation damages. Low J_0BSF (BSF contribution to the saturation current density) of 180 fA/cm² was reached at this high temperature with the best SiO₂ passivation layer. An average efficiency of 19.7% was reached using this simplified process flow (“co‐anneal process”) on large area (239 cm²) Cz solar cells. The efficiency was limited by a low FF, probably due to contaminations by metallization pastes. Improved performances were achieved in the case of a “separated anneals” process where the P‐BSF is activated at a lower temperature range. An average efficiency of 20.2% was obtained in this case, with a 20.3% certified cell. Copyright © 2014 John Wiley & Sons, Ltd.     

Effects of Aluminium Contamination on the Nervous System of Freshwater Aquatic Vertebrates: A Review

Aluminium (Al) is the most common natural metallic element in the Earth’s crust. It is released into the environment through natural processes and human activities and accumulates in aquatic environments. This review compiles scientific data on the neurotoxicity of aluminium contamination on the nervous system of aquatic organisms. More precisely, it helps identify biomarkers of aluminium exposure for aquatic environment biomonitoring in freshwater aquatic vertebrates. Al is neurotoxic and accumulates in the nervous system of aquatic vertebrates, which is why it could be responsible for oxidative stress. In addition, it activates and inhibits antioxidant enzymes and leads to changes in acetylcholinesterase activity, neurotransmitter levels, and in the expression of several neural genes and nerve cell components. It also causes histological changes in nerve tissue, modifications of organism behaviour, and cognitive deficit. However, impacts of aluminium exposure on the early stages of aquatic vertebrate development are poorly described. Lastly, this review also poses the question of how accurate aquatic vertebrates (fishes and amphibians) could be used as model organisms to complement biological data relating to the developmental aspect. This “challenge” is very relevant since freshwater pollution with heavy metals has increased in the last few decades.     

Development of blown film linear low-density polyethylene–clay nanocomposites: Part A: Manufacturing process and morphology

In this study, linear low-density polyethylene (LLDPE)/clay nanocomposites with different clay contents were prepared by melt intercalation using two different compatibilizers: maleic anhydride grafted styrene–ethylene–butylene–styrene and maleic anhydride grafted polyethylene (PE-g-MA). Melt intercalation was achieved by twin extrusion and nanocomposite films were produced by blown film extrusion. Effects of clay and compatibilizer fractions and type of compatibilizer on the structure, permeability, and the barrier properties of the nanocomposite films were investigated. PE-g-MA was shown to notably improve the dispersion of clay layers in the polyethylene matrix, and this was examined by atomic force microscopy and X-ray diffraction. The latter tests have also highlighted the importance of the screw configuration: the presence of mixing elements favors the dispersion and distribution of nanoclay. Moreover, differential scanning calorimetry results have shown no significant effect of the clay on the crystallinity of the composite while thermogravimetric analysis tests have demonstrated a decrease of onset and peak of decomposition temperatures. Finally, barrier properties toward water vapor transmission were measured. It was proven that not also clay, but the compatibilizer participated in decreasing the permeability of the film. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48589.