KGa-priderite and related compound for the selective reduction of nitrogen monoxide with propylene

The catalytic activity of KGa-priderite, K_1.6Ga_1.6Ti_6.4O₁₆, and its related compound KGa₈Ga₉Ti₁₅O₅₆ was investigated for the selective reduction of nitrogen monoxide (NO) with propylene (C₃H₆) in the presence of high oxygen concentrations. The KGa-priderite showed significant activity during this reaction, but the related compound showed only a little activity. These compounds are quite different from the conventional catalysts for NO_x selective reduction and are characterized by the fact that their properties are free from the effects of solid acidity and support metals. This difference was attributable to the NO desorption rate at the surface of these compounds. It has become clear that the KGa-priderite catalyst remarkably adsorbed NO, and it is suggested that the amount of NO adsorbed and the amount of catalytic activity are able to be increased by the design of priderite structure.     

Structure and mechanical properties of polyethylene-fullerene composites

The microhardness of films of fullerene-polyethylene composites prepared by gelation from semidilute solution, using ultrahigh molecular weight polyethylene (PE) (6×10⁶), has been determined. The composite materials were characterized by optical microscopy and X-ray diffraction techniques. The microhardness of the films is shown to increase notably with the concentration of fullerene particles within the films. In addition, a substantial hardening of the composites is obtained after annealing the materials at high temperatures (T _a=130 °C) and long annealing times (t _a=10⁵s). The hardening of the composites with annealing temperature has been identified with the thickening of the PE crystalline lamellae. Comparison of X-ray scattering data and the microhardness values upon annealing leads to the conclusion of phase separation of C₆₀ molecules from the polyethylene crystals within the material. The temperature dependence is discussed in terms of the independent contribution of the PE matrix of the C₆₀ aggregates to the hardness value.     

The use of force modulation microscopy to investigate block copolymer morphology

Force modulation microscopy (FMM) is used to characterize the external surface and internal fracture surface morphologies of three different block copolymer samples. A roll-cast poly(styrene-butadiene-styrene) triblock copolymer film, spin-coated poly(styrene-b-methyl methacrylate) thin films, and an ultrathin poly(styrene-b-hexyl isocyanate) rod-coil block copolymer film were investigated. For each sample, height and elasticity images were obtained for the same areas allowing direct comparison. The elasticity images obtained using force modulation microscopy were independent of surface roughness and found to exhibit better contrast and spatial resolution of the respective block copolymer domains than the height images. The lateral resolution of the elasticity images was sufficient to show microphase separated domains having length scales as small as about 10 nm. The poly(styrene-b-methyl methacrylate) samples demonstrate that FMM can even be successfully used to study block copolymers in which both blocks are glassy under the conditions of measurement.     

Analysis of composite laminates with transverse cracks

The analysis of the behaviour of composite laminates with general balanced lay-up sequences and containing distributed transverse cracks is discussed and demonstrated in this paper. It is shown that a constitutive model of damage for composites, which has been successfully used to analyse the effects of uniformly distributed transverse cracks in cross-ply laminates, can be readily extended to the analysis of uniformly distributed transverse cracks in more general symmetric laminates. The further extension of the theory to non-uniformly distributed damage can be achieved by finite element analysis. It is shown that the finite element implementation of the theory is particularly simple since the contribution of the damage to the overall behaviour can be incorporated into the force vectors.     

On the J-integral in periodically layered composites

When a heterogeneous elastic material is represented by an effective homogeneous elastic solid, average stress and strain fields are used. The meaning of the J-integral in the effective homogeneous solid is investigated. A periodically layered medium is considered. The relation between the J-integrals in the original layered medium and the effective medium is derived.     

P-MOSFET's with ultra-shallow solid-phase-diffused drain structureproduced by diffusion from BSG gate-sidewall

A p-MOSFET structure with solid-phase diffused drain (SPDD) is proposed for future 0.1-μm and sub-0.1-μm devices. Highly doped ultrashallow p⁺ source and drain junctions have been obtained by solid-phase diffusion from a highly doped borosilicate glass (BSG) sidewall. The resulting shallow, high-concentration drain profile significantly improves short channel effects without increasing parasitic resistance. At the same time, an in situ highly-boron-doped LPCVD polysilicon gate is introduced to prevent the transconductance degradation which arises in ultrasmall p-MOSFETs with lower process temperature as a result of depletion formation in the p⁺-polysilicon gate. Excellent electrical characteristics and good hot-carrier reliability are achieved     

New substrates of papain, based on the conserved sequence of natural inhibitors of the cystatin family

A discontinuous borate/formate buffer system is presented for horizontal polyacrylamide gel electrophoresis of DNA fragments. The resolution potential of the system could be altered by changing the total monomer concentration (5-9%T), the concentration of the crosslinker piperazine diacrylamide (2-5%CPDA), as well as the concentration of formate in the gel (40-120 mM), the leading ion of the buffer system. The separation of DNA fragments would be improved by increasing the migration distance from 22 to 28 cm. This discontinuous polyacrylamide gel electrophoresis system proved highly reproducible.     

Adopting a policy of reuse

In many firms' experience, reusing elements of proven systems designs and software is best done through a companywide program. Reuse means savings in design, testing, manufacturing and support. The author gives the basic information a company needs to get started. The author discusses the context for reuse, planning and strategy involved in a reuse program     

Hepatitis GB virus C genome in the serum of aplastic anaemia patients receiving frequent blood transfusions

GB virus C (GBV-C) RNA was detected in five of 18 patients with aplastic anaemia who had received blood transfusions, whereas it was not detected in eight patients who had not received any transfusions. Antibody against hepatitis C virus (anti-HCV) was detected in nine patients in the transfusion group, compared with one of eight who had not received any transfusions. Therefore, the route of transmission of both GBV-C and HCV in these patients appeared to have been multiple blood transfusion. Since all of the GBV-C RNA-positive patients harboured anti-HCV, GBV-C seems to frequently superinfect with HCV. Neither GBV-C nor HCV is likely to have been a causative agent of the anaemia in the cases examined.